Maytronics Dolphin Explorer Classic 9 Bedienungsanleitung

Dolphin Oasis Z5 Robotic Cleaner

8151620_Explorer_cover1_all lang.indd 1 6/03/13 2:26 PM

Dolphin Oasis Z5 Users Manual

Also known as the Explorer Classic or Top 9 Cleaner

Classic 9

Oasis Z5

Also known as

Top 9

Dolphin Explorer Classic 9 / Top 9 |User Instructions 1

Contents

1. INTRODUCTION ....................................................................... 2

2. SPECIFICATIONS....................................................................... 2

3. WARNINGS AND CAUTIONS ................................................... 2

3.1. Warnings............................................................................ 2

3.2. Cautions............................................................................. 2

4. POOL CLEANER PARTS ............................................................ 3

5. USING THE POOL CLEANER.................................................... 4

5.1. Setup.................................................................................. 4

5.1.1. Adjusting the handle angle ..................................... 4

5.2. Putting the Pool Cleaner into the pool.............................. 5

5.3. Removing the Pool Cleaner from the pool........................ 6

6. ROUTINE MAINTENANCE........................................................ 7

6.1. Cleaning the ﬁlter cartridges ............................................. 7

6.2. Dismantling and cleaning the impeller.............................. 8

7. OFF SEASON STORAGE........................................................... 9

8. TROUBLESHOOTING................................................................ 10

Dolphin Explorer Classic 9 / Top 9

User Instructions

8151620_Expolorer_all languages.indd 1 6/03/13 5:25 PM

2Dolphin Explorer Classic 9 / Top 9 |User Instructions

Dolphin Explorer Classic 9 / Top 9

User Instructions

1. INTRODUCTION

Thank you for purchasing a Maytronics Robotic Pool Cleaner.

We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and

cost effective pool cleaning. Its reliable ﬁltration in all pool conditions, active brushing, and all-surface

climbing brush enhance maximum pool hygiene.

The Robotic Pool Cleaners by Maytronics deliver advanced cleaning technology, long lasting

performance and easy maintenance. You and your family will be free to enjoy swimming with full

conﬁdence that your pool is completely clean.

2. SPECIFICATIONS

Motor protection: IP 68

Minimum depth: 0.80m/2.6ft

Maximum depth: 5m/16.4ft

3. WARNINGS AND CAUTIONS

3.1. Warnings

• Use the originally supplied power supply only

• Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth

leakage interrupter (ELI)

• Keep the power supply out of standing water

• Position the power supply at least 3m/10ft away from the edge of the pool

• Do not enter the pool while the Pool Cleaner is working

• Unplug the power supply before servicing

3.2. Cautions

When not in use store the Pool Cleaner on its Caddy in a shaded area.

Use the Pool Cleaner in the following water conditions only:

Chlorine Max 4 ppm

pH 7.0 - 7.8

Temperature 6-34°C (43-93°F)

NaCl Maximum = 5000 ppm

CAUTION

Digital switch-mode power supply

• Input - 100-250 AC VOLTS

• 50-60 Hertz

• 180 Watt

• Output - <30 VDC

• IP 54

8151620_Expolorer_all languages.indd 2 6/03/13 5:25 PM

Dolphin Explorer Classic 9 / Top 9 |User Instructions 3

Dolphin Deluxe 4/5

Dolphin Explorer Classic 9

Combined Brush

All surface climbing brush,

ideal for most pool surfaces.

Combined Brush

All surface climbing brush,

ideal for most pool surfaces.

PVC Brush

For concrete, PVC,

ﬁberglass and liner.

Wonder Brush

For smooth ceramics.

Optional Brushes

Wonder Brush

For smooth ceramics.

Remote Control Unit

PVC Brush

For concrete, PVC,

ﬁberglass and liner.

Optional Brushes

Brushes

Power supply unit

Dolphin Explorer Top 9

Filtration

Cartridge with Net ﬁlters (X4) Ultra-ﬁne ﬁlter (X4)

(optional)

4. POOL CLEANER PARTS

8151620_Expolorer_all languages.indd 3 6/03/13 5:25 PM

4Dolphin Explorer Classic 9 / Top 9 |User Instructions

5. USING THE POOL CLEANER

The Pool Cleaner is very simple to use. Simply put it into the pool and make sure that it is properly

sitting on the ﬂoor of the pool. Turn it ON and let it get the job done.

5.1. Setup

Before using the Pool Cleaner for the ﬁrst time perform the following steps:

Unwind the cable and stretch it out

completely so that it has no kinks.

Some models arrive with plastic coverings

on the brushes.

Remove them before use.

5.1.1. Adjusting the handle angle

The robot’s handle should be adjusted and locked diagonally in order to ensure optimum cleaning

results.

The handle angle can be adjusted also to determine the speed at which the robot advances along

the water-line.

To adjust the handle angle:

A. Press the latch down and hold it

in position.

B. Move the handle to the desired

position and release the latch to hold the

handle in place.

8151620_Expolorer_all languages.indd 4 6/03/13 5:25 PM

Dolphin Explorer Classic 9 / Top 9 |User Instructions 5

Position the power supply so that it is approximately in the middle of the long side of the pool at a

distance of 3m/10ft.

Attach the ﬂoating cable to the power supply

by inserting it with the notch on the connector (1)

lined up with the groove in the socket on the

power supply and turning clockwise (2).

Plug in the power supply and leave it in the OFF position.

5.2. Putting the Pool Cleaner into the pool

If your Pool Cleaner is equipped with brushes that

contain sponges, dip the brushes in the water and

squeeze them so that they will absorb water the ﬁrst

time you use the Pool Cleaner, or if the brushes have

dried out between uses.

Release the Pool Cleaner and let it sink to the ﬂoor

of the pool.

Make sure that the ﬂoating cable is free of any

obstructions.

To avoid kinks in the ﬂoating cable, place

approximately enough cable in the water for the

Pool Cleaner to reach the farthest corner of the

pool.

8151620_Expolorer_all languages.indd 5 6/03/13 5:25 PM

6Dolphin Explorer Classic 9 / Top 9 |User Instructions

Turn the power supply ON.

The Pool Cleaner will now operate until it has reached

the end of the cleaning cycle.

5.3. Removing the Pool Cleaner from the pool

CAUTION

Turn OFF and unplug the power supply.

Using the ﬂoating cable, bring the Pool Cleaner to the pool’s

edge.

Using the handle remove the Pool Cleaner from the pool.

CAUTION

DO NOT PULL THE POOL CLEANER FROM THE POOL USING THE CABLE.

OFF

8151620_Expolorer_all languages.indd 6 6/03/13 5:25 PM

Dolphin Explorer Classic 9 / Top 9 |User Instructions 7

6. ROUTINE MAINTENANCE

6.1. Cleaning the ﬁlters of the cartridges

Unplug the power supply before any servicing activity.

Note:

Do not let the ﬁlters of the cartridges dry out before cleaning.

1. Open the ﬁlter covers and remove the cartridges from both sides of the robot.

2. Open the clips and remove the ﬁlters.

3. Clean the ﬁlters with a hose.

CAUTION

8151620_Expolorer_all languages.indd 7 6/03/13 5:25 PM

8Dolphin Explorer Classic 9 / Top 9 |User Instructions

4. Reassembling the ﬁlter elements

Insert the locating tabs at the bottom of the ﬁlter element into their grooves on the base frame

then close the “S” clip.

Reinstall the base frames with ﬁlters according

to the diagram.

CAUTION

Do not force the ﬁlters into place.

6.2. Dismantling and cleaning the impeller

CAUTION

Unplug the power supply before

cleaning.

Dismantle the impeller cover and clean around the

impeller housing, then reassemble.

(Use Phillips head screwdriver).

Locating tab

Locating tab groove

“S” clip

Octagonal

end

ﬁtting

Grooved

end

ﬁtting

8151620_Expolorer_all languages.indd 8 6/03/13 5:26 PM

Dolphin Explorer Classic 9 / Top 9 |User Instructions 9

7. OFF SEASON STORAGE

If the Pool Cleaner will not be in use for an extended period, perform the following storage steps:

• Make sure that no water is left in the Pool Cleaner

• Thoroughly clean the ﬁlters of the cartridges and insert in place

• Roll up the cable so that it has no kinks and place on the Caddy

• Store the pool cleaner upright on the Caddy in a protected area out of direct sun/rain/frost

at a temperature of between 5˚-45˚C / 41˚-113˚F

8151620_Expolorer_all languages.indd 9 6/03/13 5:26 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Maytronics Staubsauger Handbücher

Maytronics

Maytronics Dolphin M600 Bedienungsanleitung

Maytronics

Maytronics Dolphit Mass 13 Bedienungsanleitung

Maytronics

Maytronics Dolphin Wave Betriebsanleitung

Maytronics

Maytronics MCC6 Bedienungsanleitung

Maytronics

Maytronics Dolphin WAVE 300 XL Bedienungsanleitung

Maytronics

Maytronics Dolphin Basic 11 Bedienungsanleitung

Maytronics

Maytronics MyDolphin Bedienungsanleitung

Maytronics

Maytronics MBC8-UNI Bedienungsanleitung

Maytronics

Maytronics Dolphin M600 Bedienungsanleitung

Maytronics

Maytronics CLASSIC 8+ Bedienungsanleitung

Maytronics

Maytronics Dolphin Basic 12 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch