MELICONI CONTROL 3-300 PLUS - WINDOWS Bedienungsanleitung

USING THE KEYS AND FUNCTIONS

The functions described below are only available

if they are already foreseen by your appliance.

Keep this booklet in case you ever need to consult it in the future.

Thanks to the enclosed CD and to the on-line guide on the site www.meliconi.com/guide,

it is even easier and faster to programme the remote control

and discover all its potential.

Thanks to its large database and numerous functions the Meliconi 3 in 1 remote control is ideal for replacing

up to 3 remote controls of any brands for TV - DVD/VCR (

Video Recorder

) - SAT/TER (

Digital Terrestrial

Specific area for SET TOP BOX

FORWARD/REWIND functions for VCR and DVD

Thank you for choosing

a MELICONI remote control.

Teletext keys

Number keys

Keys for selecting which appliance you want to use.

TV ON/OFF key

Control the volume using +/–

To select the next (P+) or previous ( P-) channel or programme

MUTE key turns the volume on and off

Confirm key

VCR/DVD function keys: RECORD - PAUSE - STOP - PLAY

or fastext functions

To access the MENU

Key with additional TV functions

To select an external input terminal

To move around within the MENU or to control the BRIGHTNESS/COLOUR

Keys that the user can customize to memorize and

access additional commands.

1 - 2 - 3 - 4 - 5 - 6

7 - 8 - 9 - 0 - 1/--

PREPARE FOR USE

Read these instructions carefully

before programming your remote control!

VCR TER

HOW TO PROGRAMME THE REMOTE CONTROL

FITTING THE BATTERIES

Before programming and using the remote control,

fit the batteries.

The remote control requires 2 new AAA/LR03 batteries. Insert the batteries as shown:

• Change the batteries if the light indicator starts to flash during use. The batteries are low.

• Make a note of the codes for your appliances on the adhesive label inside the battery cover in case you

have to reprogramme your remote control.

• This remote control has a permanent memory and does not lose the programmed codes or functions

when the batteries are removed.

To display and make a note of the code memorized by means of the search,

follow the instructions described in the paragraph CURRENT CODE DISPLAY.

ADDITIONAL CHECK

Check that some of the other keys, corresponding to those on your original remote control, work correctly.

If the commands function incorrectly or erratically, you have probably entered a code for a similar remote

control but not the right one. In this case, repeat the search procedure starting from point 3, entering the

code previously used (e.g. 0025).

1. Turn on the appliance to be programmed:

- if a VCR, insert a cassette

- if a TV, SAT or TER select a programme

- if a DVD insert a DVD.

2.Look for the brand of the appliance you want to programme

in the code list and make a note of the corresponding

code alongside

(e.g. PHILIPS 0025)

3. Hold down the selection key for the appliance to be

programmed for 5 seconds.

4. When the key is released, it will start to flash. Enter the

brand code previously identified

(e.g. 0025).

The selection

key flashes more quickly to indicate that the remote

control is ready for the search.

5. Point the remote control towards the appliance. Press

and slowly release the ON/OFF key or PLAY for the VCR

and DVD several times, stopping when the appliance

responds correctly to the command.

6. When the appliance responds correctly, press the OK key

to confirm.Three flashes indicate that the search operation

has been completed correctly.

The TV - DVD - SAT keys can be programmed according to your

requirements, following the procedure described below.

The quickest and easiest way to programme the remote control is by consulting enclosed

CD or the website www.meliconi.com/guide.

Warning: programme one appliance at a time!

PHILIPS 0025

+++

5 SEC.

or or

VCR TER

NB: THE LIGHT INDICATOR STOPS FLASHING

The remote control exits programming mode and the light indicator stops flashing:

• if no keys are pressed for 14 seconds

• if an invalid brand code is entered

• if a key other than ON/OFF or PLAY is accidentally pressed

• if the end of the code search list has been reached. In this case, consult the website www.meliconi.com/guide

GLOBAL SEARCH REMOTE CONTROL PROGRAMMING

The quickest and easiest way to programme the remote control is by consulting enclosed

CD or the website www.meliconi.com/guide.

Warning: programme one appliance at a time!

1. Turn on the appliance to be programmed:

- if a VCR, insert a cassette

- if a TV, SAT or TER select a programme

- if a DVD insert a DVD.

2. Hold down the selection key for the appliance to be

programmed for 5 seconds.

3. When the key is released, it will start to flash. Enter the

code 0000; the selection key flashes more quickly to

indicate that the remote control is ready for the search.

4. Point the remote control at the appliance. Press and slowly

release the ON/OFF key or PLAY for the VCR and DVD

several times, stopping when the appliance responds

correctly to the command.

5. When the appliance responds correctly, press OK to

confirm. Three flashes indicate that the search operation

has been completed correctly.

ADDITIONAL CHECK

Check that some of the other keys, corresponding to those on your original remote control, work correctly.

If the commands function incorrectly or erratically, you have probably entered a code for a similar remote

control but not the right one. In this case, repeat the search procedure starting from point 2.

To display and make a note of the code memorized by means of the search,

follow the instructions described in the paragraph CURRENT CODE DISPLAY.

NB: THE LIGHT INDICATOR STOPS FLASHING.

The remote control exits programming mode and the light indicator stops flashing:

• if no keys are pressed for 14 seconds

• if a key other than ON/OFF or PLAY is accidentally pressed

• if the code search list is completed. In this case consult the enclosed CD or the site

www.meliconi.com/guide

This operation can take up to 20 minutes and should be carried out if you have not succeeded

in programming the remote control by means of the method described above.

+++

5 SEC.

or or

VCR TER

1. Press the select key for which you want to know the code

and hold down for 5 seconds.

When the key is released it will start to flash; press and

release the 1-/-- key within 8 seconds.

3. After a pause of several seconds, the indicator light produces

four series of flashes with a space between them, corres-

ponding to the code you are looking for. Count the number

of flashes; each series of flashes corresponds to one figure

in the code. 10 flashes correspond to 0.

4. Note the code on the adhesive label inside the battery cover

in case you have to reprogramme the remote control subse-

quently.

CURRENT CODE DISPLAY

NB: this operation cannot be interrupted and the remote control

cannot therefore be used until the end of the four series of flashes.

To find out the code of your remote control, follow this procedure:

Although not indicated on the keypad,

some keys can be used for additional commands.

Find them on your remote control by pressing the keys one by one and discovering the commands that

interest you.

In particular, the additional functions most frequently used, such as NORMALIZATION, COLOUR and

BRIGHTNESS, can be found on the following keys:

TV FUNCTIONS ALWAYS ACTIVE

HOW TO USE THE ADDITIONAL COMMANDS WHICH DO NOT APPEAR ON THE KEYPAD

For the functions used less frequently, look for the additional commands on the site

www.meliconi.com/guide. As well as easily finding the code to programme your remote control, consulting

the on-line guide will help you to find which keys on the remote control correspond to the additional

commands. You can memorise the additional commands on the

F1 - F2 - F3 - F4

function keys.

Normalization:

Brightness (+): or

Brightness (-): or

Colour (+): or

Colour (-): or

If you know the exact code with which to programme the remote control, enter it as follows:

ENTERING THE CODE

1. Hold down the selection key for the appliance to be

programmed for 5 seconds.

2. When the key is released it will start to flash; enter the

code (

e.g. TV 1100

). Three flashes indicate that the

operation has been completed correctly.

The functions

Mute

Vol -

Vol +

and

are memorized on the keys

. These functions

can be used to control appliances other than the TV. For further information consult the enclosed CD or

the on-line guide on the site www.meliconi.com/guide

......................................................... = 1

.............................................. = 3

= 0

............................ = 6

Code obtained = 1306

5 SEC.

or or

VCR TER

5 SEC.

or or

VCR TER

+++

1 1

SOLUTION

Try some of the other frequently-used keys. If the

problem persists, check that the batteries are fitted

correctly. If necessary, replace them with 2 new

1.5 V AAA/LR03 batteries.

Check that the batteries are new and that the remote

control is pointing at the TV without any obstacles

in the way. If required, reset the remote control

code, following the programming procedure.

The batteries are low. Change them.

You may have used the wrong code. Reset the

remote control code, following the programming

procedure.

To find the code with which to programme your

remote control consult the on-line guide at

www.meliconi.com/guide.

PROBLEM SOLVING

INFO-LINE

If you have any queries about your remote control:

• read this Instruction Booklet carefully - you will find an answer to most of your questions

• consult our website where you will find the answers you need easily and quickly.

PROBLEM

The appliance does not respond and the TV -

DVD - SAT selection keys do not light up

when a key is pressed.

The appliance does not respond but the

selection keys do light up.

The selection keys flash.

The remote control commands are not all

working correcting.

The code for your appliance make is not in

the Code Book.

WARRANTY: 2 years

The warranty ceases to be valid if the product

is tampered with or used incorrectly.

Purchase date / /

Dealer’s stamp

The symbol of the crossed trash can shown on the remote control indicates that once the product has reached the end of its working life it

should be disposed of separately from other waste. The user should, therefore, take the remote control to a specialised collection centre

for electronic and electrical waste, or hand it over to the dealer when purchasing a new similar remote control, on a one to one basis. Correct

separated collection for subsequent recycling, processing and environmentally compatible disposal contributes in preventing possible

negative effects on the environment and on health and favours the recycling of the materials used in producing the remote control. Improper

disposal of the product by the user leads to application of the penalties as per legislative decree no. 22/1997 (article 50 and following of

decree no. 22/1997).

Inhaltsverzeichnis

Andere MELICONI Fernbedienung Handbücher

MELICONI

MELICONI LOGIC12 Bedienungsanleitung

MELICONI

MELICONI EASY 300 Bedienungsanleitung

MELICONI

MELICONI EASY 200 Bedienungsanleitung

MELICONI

MELICONI CONTROL TV 100 Bedienungsanleitung

MELICONI

MELICONI FACILE LIGHT Bedienungsanleitung

MELICONI

MELICONI GUMBODY FACILE 100 Bedienungsanleitung

MELICONI

MELICONI CONTROL 5-500 PLUS Bedienungsanleitung

MELICONI

MELICONI easytel 2+ Bedienungsanleitung

MELICONI

MELICONI SPEEDY 210 STB Bedienungsanleitung

MELICONI

MELICONI Personal 6+ Bedienungsanleitung

MELICONI

MELICONI pratico 6 Installations- und Betriebshandbuch

MELICONI

MELICONI TLC01 Bedienungsanleitung

MELICONI

MELICONI TLC04 Bedienungsanleitung

MELICONI

MELICONI Algo 2.1 Bedienungsanleitung

MELICONI

MELICONI Control TV.1 Bedienungsanleitung

MELICONI

MELICONI PRATICO 2 Light Bedienungsanleitung

MELICONI

MELICONI GUMBODY UNIVERSAL 6 LIGHT Bedienungsanleitung

MELICONI

MELICONI Speedy 210 combo Installationsanleitung

MELICONI

MELICONI TLC02 Bedienungsanleitung

MELICONI

MELICONI Easytel 2+ Bedienungsanleitung

MELICONI

MELICONI Smart4 Bedienungsanleitung

MELICONI

MELICONI Speedy 100 plus Bedienungsanleitung

MELICONI

MELICONI TLC05 Bedienungsanleitung

MELICONI

MELICONI Facile 5.1 LED Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung