Metrologic MS 1690 Focus Series Bedienungsanleitung

METROLOGIC INSTRUMENTS, INC.

MS1690 Focus™

Area Imaging Bar Code Scanner

Supplemental Configuration Guide

work may be reproduced, transmitted, or stored in any form or by any means

without prior written consent, except by reviewer, who may quote brief

passages in a review, or provided for in the Copyright Act of 1976.

Products and brand names mentioned in this document are trademarks of

their respective companies.

TABLE OF CONTENTS

Scanner Operation

Presentation and Trigger Modes........................................................................1

Presentation Mode .........................................................................................1

Multi-Try Trigger Mode ...................................................................................1

Continuous Trigger Mode ...............................................................................1

Single Trigger Mode .......................................................................................2

Omnidirectional and/or Linear Scanner Modes..................................................3

Linear Illumination Aiming ..................................................................................5

Data Output ........................................................................................................ 5

Same Symbol Timeouts .....................................................................................6

Code Types and Decode Rules

Data Matrix ......................................................................................................... 7

QR Code ............................................................................................................8

MaxiCode ...........................................................................................................8

Aztec ..................................................................................................................9

Postal .................................................................................................................9

RS232

Software Handshaking .....................................................................................13

Interfaces

Additional Interfaces.........................................................................................14

Office Locations and Contact Information............................................................17

SCANNER OPERATION

Presentation and Trigger Modes

The MS1690 has four configurable modes for scanning: the presentation mode,

the multi-try trigger Mode, the continuous trigger mode and the single-trigger

mode. These modes can be configured separately for in-stand and out-of-stand

scanner operation.

Presentation Mode

Out-of-Stand

* Presentation Mode

In-Stand

³418304

³420204

* Multi-Try Trigger Mode

Out-of-Stand

Multi-Try Trigger Mode

In-Stand

³418324

³420224

Continuous Trigger Mode

Out-of-Stand

Continuous Trigger Mode

In-Stand

³418354

³420254

* Factory Default Configuration

SCANNER OPERATION

Presentation and Trigger Modes

Single Trigger Mode

Out-of-Stand

Single Trigger Mode

In-Stand

³418344

³420244

Set In-Stand Mode to Match

Out-of Stand Mode

³4202154

* Factory Default Configuration

SCANNER OPERATION

Omnidirectional and/or Linear Scanner Modes

The MS1690 can be configured to operate as an omnidirectional scanner, or a

linear scanner, or a combination of both. The scanner can be configured to

these modes separately for trigger and presentation operations.

When configured to operate as an omnidirectional scanner, all 1D and 2D

barcodes are scanned omnidirectionally (except Code 128 scanner configuration

labels, which have to be linearly aligned for successful scanning).

When configured to operate as a linear scanner, the 1D barcodes have to be

linearly aligned for successful scanning while the 2D barcodes cannot be

scanned.

When configured to operate as both the linear and omnidirectional scanner, the

1D barcodes have to be linearly aligned for successful scanning while the 2D

barcodes are scanned omnidirectionally.

By default, the scanner is configured to omnidirectional scanning for trigger and

presentation operations.

Enable Linear Only

in Trigger Operations

Disable Linear Only

in Trigger Operations

³120213

³120203

Enable 1D Linear Only

in Trigger Operations

Disable 1D Linear Only

in Trigger Operations

³120212

³120202

SCANNER OPERATION

Omnidirectional and/or Linear Scanner Modes

Enable Linear Only

in Presentation Operations

Disable Linear Only

in Presentation Operations

³120211

³120201

Enable 1D Linear Only

in Presentation Operations

Disable 1D Linear Only

in Presentation Operations

³120210

³120200

SCANNER OPERATION

Linear Illumination Aiming

The MS1690 can be configured to use the linear illumination as an aiming

means, separately for trigger and presentation operations.

* Enable Aiming in

Trigger Operations

Disable Aiming in

Trigger Operations

³124000

³124010

Enable Aiming in

Presentation Operations

* Disable Aiming in

Presentation Operations

³124011

³124001

Data Output

The MS1690 can be configured to have the data output disabled.

* Enable Data Output Disable Data Output

³121205

³121215

* Factory Default Configuration

SCANNER OPERATION

Same Symbol Timeouts

Retain Same Symbol

Timeout on Trigger

* Reset Same Symbol

Timeout on Trigger

³120013

The same-symbol

timeout is not

restarted when the

trigger is pulled.

³120003

The same-symbol

timeout is restarted

when the trigger is

pulled.

* Factory Default Configuration

Andere Handbücher für MS 1690 Focus Series

Inhaltsverzeichnis

Andere Metrologic Barcode-Lesegerät Handbücher

Metrologic

Metrologic TECH 8 Bedienungsanleitung

Metrologic

Metrologic MS7600 Bedienungsanleitung

Metrologic

Metrologic MS7600 Bedienungsanleitung

Metrologic

Metrologic MS7120 Orbit Bedienungsanleitung

Metrologic

Metrologic Stratos MS2420 Bedienungsanleitung

Metrologic

Metrologic MS6720 Bedienungsanleitung

Metrologic

Metrologic MK1690-61A38 Bedienungsanleitung

Metrologic

Metrologic QuantumT MS3580 Bedienungsanleitung

Metrologic

Metrologic MS860i Mini-Slot Bedienungsanleitung

Metrologic

Metrologic MK1650-62B14 - Metrologic IS1650 - Wired Stationary Barcode... Bedienungsanleitung

Metrologic

Metrologic MS6200 Pulsar Series Bedienungsanleitung

Metrologic

Metrologic IS4225 ScanGlove Bedienungsanleitung

Metrologic

Metrologic MS7120 Series Bedienungsanleitung

Metrologic

Metrologic Genesis MS7580 Bedienungsanleitung

Metrologic

Metrologic MS6720 Bedienungsanleitung

Metrologic

Metrologic MS6720 Bedienungsanleitung

Metrologic

Metrologic Orbit MS7100 Bedienungsanleitung

Metrologic

Metrologic Quantum T MS3580 Bedienungsanleitung

Metrologic

Metrologic MS7320 InVista Series Bedienungsanleitung

Metrologic

Metrologic MS 1690 Focus Series Bedienungsanleitung

Metrologic

Metrologic TECH 7 Bedienungsanleitung

Metrologic

Metrologic MS5100 Eclipse Series Bedienungsanleitung

Metrologic

Metrologic Eclipse MS5145 Bedienungsanleitung

Metrologic

Metrologic MS7620 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung