Metrologic MS951 Bedienungsanleitung
METROLOGIC INSTRUMENTS, INC.
MS951 Hand-Held Laser Scanner
and MS951 Hand-Held Scanner
with Built-in PC
Keyboard Wedge Interface
Installation and User’s Guide
MLPN 2365
Printed in USA
October 1998
ii
Locations:
USA Corporate Headquarters Europe
Metrologic Instruments, Inc. Metrologic Instruments GmbH
90 Coles Road Dornierstrasse 2
Blackwood, NJ 08012 82178 Puchheim b.
Customer Service: 1-800-ID-METRO Munich, Germany
Tel: 609-228-8100 Tel: 49-89-89018-0
Fax: 609-228-6673 Fax: 49-89-89019-200
www.metrologic.com
ASIA
South America Metrologic Asia (PTE) Ltd.
Metrologic Instruments 31, Kaki Bukit Road 3
Rua Flórida, 1.821-5°Andar-Brooklin #05-08 Techlink
CEP 04571-090, São Paulo-SP, Brasil Singapore 417818
Outside Brazil: Tel: 65-842-7155
Tel: 55-11-5505-6568 Fax: 65-842-7166
In Brazil:
Tel: 55-11-5505-2396
Fax: 55-11-5507-2301
Copyright
© 1998 by Metrologic Instruments, Inc. All rights reserved. No part of this work may
®
be reproduced, transmitted, or stored in any form or by any means without prior written
consent, except by reviewer, who may quote brief passages in a review, or provided for
in the Copyright Act of 1976.
Products and brand names mentioned in this document are trademarks of their
respective companies.
iii
Table of Contents
Introduction ................................................. 1, 2
Scanner and Accessories ......................................... 3
Quick Start .................................................... 4
Operational Test ............................................... 5
Scanner Installation: Powered by External Power Supply ............... 6
Scanner Installation: Powered by Host Device ....................... 7
Scanner Installation to the PC
(Scanner with Built-in PC Keyboard Wedge Interface) ............... 8, 9
Configuration of the MS951/MS961-48 Scanner ..................... 10
Version “11" 46X Interface ...................................... 11
Configuring the Scanner with 46XX Interface ................ 12
Operating Characteristics ................................ 12
Configuring the IBM 46XX .............................. 12
IBM 4683 and 4693 Terminals Driven by a 46XX Store Controller
Running 4680.OS or 4690.OS ............................ 13
IBM 4684 and 4694 Systems ............................. 13
Parts of the MS951 ............................................ 14
Components of the MS900 Series Stand ............................ 15
Installation of the MS900 Series Stand .......................... 15, 16
Audible Indicators ............................................. 17
Visual Indicators ........................................... 18-21
Labels ....................................................... 22
IR Sensor Activation ........................................... 23
Scan Field ................................................... 24
iv
MS951 - Depth of Field and Symbol Specification ................ 25, 26
MS961 - Depth of Field and Symbol Specification ................ 27, 28
Maintenance .................................................. 29
Applications and Protocols ...................................... 29
Appendix A
MS951 Hand-Held Laser Scanner Specifications .......... 30, 31
MS951 Hand-Held Laser Scanner w/KBW Specifications ... 32, 33
Appendix B
Default Settings ..................................... 34-38
Appendix C
Pin Assignments for the Coil Cable ........................ 39
Pin Assignments for the MCA (DEC9S) .................... 40
Pin Assignments for the 5-pin DIN and 6-pin DIN (KBW) ..... 41
Appendix D
Warranty and Disclaimer ............................. 42, 43
Appendix E
Notices ........................................... 44, 45
Appendix F
Patents ............................................... 46
Index .................................................... 47, 48
1
Introduction
The scanning process is initiated by an infrared device (ScanQuest™ Sensor)
that is active as long as power is applied to the unit. The infrared (IR) signal
extends approximately eight (8) inches beyond the scan window in long range
mode. In short range mode it extends approximately three (3) inches beyond
the scan window. To activate the unit, wave an object in front of the IR sensor
or pick up the scanner and direct the scan window down-wards.
When the unit is activated by the IR sensor, the red LED will remain on. This
is a visual indication that the laser is on and the scanner is beginning a
sequence of bar code recognition, decoding, and transmission. When an object
is in the scan field, the laser determines if a bar code is present. If a bar code is
not detected within approximately 2.5 seconds, the red LED will shut off
indicating that the laser is no longer on. To reactivate the scanning sequence,
the object must be removed and another object must be presented.
When a bar code is recognized, the scanner will decode the bar code and then
transmit the data to the host system. When this occurs, the green LED will
flash and the scanner will beep when the decoding is complete. At this time,
the laser will turn off if the object is removed from the field. However, if the
object stays in the field the laser remains on for up to 2.5 seconds trying to
detect another bar code. This feature allows very fast consecutive scans of
symbols in close proximity, such as a wall of boxes or cartons, or a bar coded
menu. The laser will stay on for approximately 4 seconds and then will turn off
if the same symbol stays in the field after a successful scan. This prevents
unintentional reads of the same bar code. To read the same symbol more than
once, simply remove the object from the scan field for approximately 1 second
and then the scanner can then scan the same symbol on the next pass.
The MS951 Hand-Held Laser Scanner with Built-in PC Keyboard Wedge
Interface is designed to be used for keyboard emulation only. However, many
RS-232 programmable functions that are available in other Metrologic
scanners are also available as keyboard wedge functions. The most important
selectable options specific to the keyboard wedge are the following:
Keyboard Type
!** AT (includes IBM PS2 models 50, 55, 60, 80)
®
!XT
!IBM PS2 (includes models 30, 70, 8556)
2
Keyboard Country Type
!** USA !United Kingdom
!French !German
!Italian !Spanish
!Belgium !Swiss
!IBM KB4700 Financial Keyboard
** Default setting. Refer to the Programming Guide MLPN 2366 for
information on how to change the default settings.
3
Scanner and Accessories
The following is a list of the parts included in the MS951 shipping
carton.
!MS951 Hand-Held Laser Scanner - Refer to page 28 for
available communication protocols
!Stand (MLPN 45482)
!Optional Power Transformer 120V or 220V or 240V (AC in)
5V (DC out) @300mA regulated (MLPN 46010/46009/46008)
for applications where host power is not available
!Installation and User’s Guide (MLPN2365)
!MS951 Hand-Held Laser Scanner including all
Scanner Configurations Programming Guide
(MLPN 2366)
Keyboard Wedge Scanners:
!Adaptor Cable with a 5-pin DIN male connector on one
end and a 6-pin mini DIN female connector on the other
(MLPN 19716)
RS-232, Light Pen, some OCIA and some 46xx scanners:
!MCA (Metrologic Connector Adaptor) (MLPN MCA951)
!For direct connect application (No Power Transformer)
4 position MCA ground jumper (MLPN 51191)
!RS-232 Scanner Demonstration Program (Receive)
diskette (MLPN 2351)
Other items may be ordered for the specific protocol being used. To order
additional items, contact the dealer, distributor or call Metrologic’s
Customer Service Department at 1-800-ID-METRO or 1-800-436-3876.
4
Quick Start
1.) Plug in the scanner. When the MS951 is ready to
scan, the red LED will turn on, followed by the
green LED, and then the scanner will emit one
beep.
2.) The scanner is shipped from the factory pro-
grammed with default settings. To configure
the MS951 scanner to meet the host system’s
specific needs, refer to the Programming
Guide (MLPN 2366) for instructions on how
to enter the program mode and to select the
appropriate bar codes.
Note: Keyboard Wedge scanners default to Keyboard Wedge
Communications and USA, AT keyboard when the Recall
Defaults is scanned. With all other versions, the Recalll Defaults
barcode configures the MS951 for an RS-232 interface. If RS-232
is not being used, scan at least one other bar code to enable OCIA,
Light Pen or 46xx.
5
Operational Test
If the scanner is to receive power from an external power supply, test the
scanner before it is connected to the host system.
Keyboard Wedge Scanners:
1. Plug one end of the coil cable into the keyboard connector on the PC.
Then plug the keyboard connector into the other end of the coil cable.
Plug in the external transformer.
2. Check the AC input requirements of the power supply (for special
circumstances only) to make sure the voltage matches the AC outlet.
Connect AC power to the transformer.
3. Listen for a single beep (red LED on) which indicates the scanner is
ready for use.
RS-232, Light Pen, OCIA and 46xx scanners:
1. Plug the scanner’s coil cable into the MCA (Metrologic Connector
Adaptor).
2. Check the AC input requirements of the power supply to make sure the
voltage matches the AC outlet. Plug the power supply into the MCA and
the appropriate AC outlet. (the socket-outlet shall be installed near the
equipment and shall be easily accessible.)
3. Listen for a single beep (red LED on) which indicates the scanner is
ready for use.
6
MCA
Female
9-pin D
10 Position Modular Connector
at the end of the Coil Cable
Scanner Installation: Powered by External Power Supply
To maintain compliance with applicable standards, all circuits connected to the
scanner must meet the requirements for SELV (Safety Extra Low Voltage)
according to EN 60950.
1. Turn off the host system.
2. If using a communication cable, connect the cable to the correct port on
the host device and the MCA (Metrologic Connector Adaptor). If the
host device is an IBM compatible PC with a male 9-pin serial port,
connect the MCA to the port.
3. Plug the scanner’s coil cable into the MCA.
4. Check the AC input requirements of the power supply to make sure the
voltage matches the AC outlet. (the socket-outlet shall be installed near
the equipment and shall be easily accessible.) Plug the power supply
into the MCA and the AC outlet.
5. Turn on the host system.
Note: a. When the scanner first receives power, the red LED will turn
on, followed by the green LED, and then the scanner will beep
once.
b. Plugging the scanner into the serial port of the PC does not
guarantee that scanned information will appear at the PC. A
software driver and correct configuration setting are also
required for proper communication to occur.
Andere Handbücher für MS951
2
Inhaltsverzeichnis
Andere Metrologic Scanner Handbücher
Metrologic
Metrologic OrbitCG MS7180 Bedienungsanleitung
Metrologic
Metrologic Laser Scanner Bedienungsanleitung
Metrologic
Metrologic IS4813 Kurzanleitung zur Einrichtung
Metrologic
Metrologic MK2320KD-60B241 - Metrologic MS 2320 Stratos... Bedienungsanleitung
Metrologic
Metrologic MS9500 Voyager Series Bedienungsanleitung
Metrologic
Metrologic IS8000 Bedienungsanleitung
Metrologic
Metrologic IS4220 ScanGlove Montage- und Bedienungsanleitung
Metrologic
Metrologic IS4225 ScanGlove Bedienungsanleitung
Metrologic
Metrologic MS951 Betriebsanleitung
Metrologic
Metrologic Eclipse MS5145-00 Bedienungsanleitung
Metrologic
Metrologic MK9535-39B538 Bedienungsanleitung
Metrologic
Metrologic MS9544 VoyagerPDF Series Bedienungsanleitung
Metrologic
Metrologic MK9535-39B538 Bedienungsanleitung
Metrologic
Metrologic MS9590i VoyagerGS Series Bedienungsanleitung
Metrologic
Metrologic MS6720 Gebrauchsanweisung
Metrologic
Metrologic MS9500 Voyager Series Bedienungsanleitung
Metrologic
Metrologic MS951 Betriebsanleitung
Metrologic
Metrologic MS9540-38-3 - Metrologic MS9540 VoyagerCG Bedienungsanleitung
Metrologic
Metrologic MS9535 Voyager Kurzanleitung
Metrologic
Metrologic iQ160 Benutzerhandbuch
