MICODUS ML208G Bedienungsanleitung
ML208G User Manual V1.0
Learn how to set up your new MiCODUS Tracker
Copyright ©2022 MiCODUS | All Rights Reserved
R
1. Introduction
2. Product Features
Welcome to use our device，please read this manual carefully to install and operate
device exactly. This user manual is for reference only.If some contents and operation
steps are inconsistent with those for the actual product, the latter will prevail.
With ML208G Long Standby GPS Tracker, we can monitor your vehicle or asset by
GPS satellite positioning system, GPRS/LTE CAT M1/LTE NB1 communication and
Internet, remote location of vehicles or asset can be achieved through a powerful
service platform. Meanwhile, ML208G also can be a host tracker works Beacons, it
can get temperature & humidity data from Beacons by BLE.
ML208G plays a significant role in logistics and asset protection, helping customers
to achieve transparent management, reduce costs, ensure safety, and improve
efficiency
* Support 2G GSM/EGPRS+4G LTE CAT M1/NB1 (iOT network)
* Globally supports viarious satellite positioning system: GPS/Glonass/Beidou/
Galileo/Qzss
* Triple Positioning Ways and Support AGPS: GNSS+WiFi+LBS
* Built-in temperature sensor, support temperature alarm (Optional)
* Built-in light sensor, detecting opening door/box behavior. Support Light alarm
* One GPS host device can connect 24 beacons at most, it can gather temperature &
humidity data from Beacon model by BLE, then upload all data to
server regularly
* Buit-in with 5500mAh rechargeable lithium Battery
* Multiple alarms: speed alarm, vibration alarm, shift alarm, light sensor alarm, low
power alarm, geo-fence alarm
* Support firmware upgrade by OTA
3.Specifications
Model
Weight
Dimensions
Battery Working Time
ML208G
165g
120mm(L) * 69mm(W) * 19.5mm(H)
5500mAh Lithium Battery; 3.3-4.2V DC;
Charge 5A@1A
Device Information
Work Current
Working Temperature
Working Humidity
Working Frequency
SIM Card
Cellular Antenna
Hot/warm/cold Start
GNSS Antenna
Positioning Type
Accurancy
GNSS Band
GNSS Module
Certificates
<3s，<26s，<35s @ Open Sky
Built-in Ceramics GNSS Antenna
GNSS+WiFi+LBS+AGPS
BLE Version
BLE Max Connections
BLE 4.2
24 Beacons
GNSS Accuracy: <2M @ Open Sky
LBS Accuracy: >200m (Depend on density of
base stations)
1575MHz
GCF,CE,PTCRB,RCM,FCC,IC,JATE,Anatel,
FAC,CCC
2G GSM/GPRS: 850/900/1800/1900MHz
4G LTE CAT M1: B1/B2/B3/B4/B5/B8/B12/B13/
B18/B19/B20/B25/B26/ B28
4G LTE CAT NB1: B1/B2/B3/B4/B5/B8/B12/B13
/B18/B19/B20/B25/B26/ B28
Normal Size
Built-in
LTE data (400mA);
GPRS data (500mA)
Idle(4mA);30uA(power off
-20℃- 60℃
20%-90%RH non-condensing
Working Parameters
Cellular Specifications
GNSS Specifications
Bluetooth
5.How to manage the tracker to get online?
4.Product Structure
Normal SIM
Step 1
Please get a suitable SIM card from your local place. The
SIM card must meet below points:
It must be compatible with the 2G GSM or 4G LTE CAT M1 network
Please enable SMS, call, internet data traffic of the SIM card
Remove the PIN code
Enable the caller ID display feature
Use Normal size SIM card for the tracker
Please inquire the SIM card provider for the exact correct APN
information
LED Event State
State
Searching for GSM/Cat M1/Cat NB1 network
RED LED GSM/Cat M1/Cat NB1 works normally Slow blinking
Fast blinking
Slow blinking
Fast blinking
GPS works normally
Searching GPS Satellites
BLUE LED
Step 3 Indicator status description
Step 2
1 2 3 4
SIM card installation
Open the cover Insert SIM card
correctly
Long press the
power button to
turn on
Install the cover
6. Package Content
GPS Main Unit
USB Charging Cable
User Manual
Genuine Packing Box
3M Velcro
x 1
x 1
x 1
x 1
x 1
Step 4 Configure APN
APN,ApnName,User,
Password# SET APN OK APN,orange,
orange,orange#
APN,internet#SET APN OKAPN,ApnName#
SMS Command
Format Reply Example Note
If the SIM card has APN user and APN
password, then use this command.
If the SIM card operator doesn't have APN
user and APN password, then please use this
command.
Please get the exact correct APN name from local SIM card provider.Take the tracker
to a good signal place for operation and configure the APN for it as below:
Note: The APN information is very important, it must be 100% correct to match with the sim card
of the tracker, if you configured wrong APN, the tracker also will reply "SET APN ok" but it will
can't get online!
7. Functions Explanation
a. Remove Alarm
* Conditions: When Device is removed.
* : Light Sensor detect any light will trigger this alarm
NOTE
b. Temperature Alarm
* Conditions: When Temperature exceed set range
* : You need to set Temperature range value & time.
NOTE
c. Vibration Alarm
* Conditions: When the Vehicle Vibration occurs.
* : You need to set vibration sensitivity and time, there is an alarm switch.
NOTE
d. Geo-fence Alarm
* Conditions: when the vehicle entry / exit / across11 the Geo-fence.
* : You need to set the conditions of crossing fence, fence types and
so on.
NOTE
e. Low Battery Alarm
* Conditions: When device’s battery power falls below a certain value.
* : When above alarm occurs, device will send alarm to service platform,
meanwhile send a SMS message to the administrator number if the number is set in
advance.
NOTE
8. Applications
a.Host without BLE beacon
b.Host with BLE beacon
Cannot connect platform
1）If power cables are wired correctly? Pay attention to not
connect them to controlling cables of vehicle.
2）If SIM card is installed correctly? Please refer to the
installation instructions.
3）Check status of LED indicators. If device is OK,12 red and
blue LED will intermittently and slowly flick.
4）Inquiry parameters of device via commands and check
replied parameters.
9. Troubleshooting
Type Use
Device is never online on the position server when installed at
the first time. Please check device:
Offline status
1）call SIM card of device and check if you can hear connecting
ring.
2）Check if vehicle is in the area where there is no GSM or LTE
CAT M1/NB1 signal.
3）Check if one device or all devices are offline in the area . If all
devices are offline, you should ask operator If network is OK.
4）Check if SIM card has enough balance.
5）If device becomes offline on the last day of one month, please
check data transferring is closed or not.
6）Inquiry parameters of device via commands and check
replied parameters
First check if LED indicators are OK, if cannot check them, you
can check SIM card following next steps:
No positioned
1）If the vehicle is in the place where there is no GPS signal.
2）The upside of device should be installed with face toward
the sky.
3）The GSM & LTE CAT M1/NB1 and GPS signal may be
weakened if device is installed in the place with electromagnetic
wave absorption material(such as metal blocks), special attention
should be paid if there is metal thermal insulation layer or heating
layer on the front windshield, so that the position accuracy will
decline, and the severe ones will not be positioned.
If the GPS is active, but device cannot be positioned for long
time, please check device:
Type Use
Command Type Command
Format Explanation Example
10. Full SMS Commands List
PARAMETER PARAM# IMEI, APN, SERVER, COLLECT,
LANG,GMT,SAVING
IMEI:354188046487208
APN:cmnet
SERVER:"tcp://hzgps.sky200.
com:32001"
COLLECT:120,300,40,30,4
LANG:EN GMT:E8.00
SAVING:1;
STATUS STATUS# BATTERY, GPRS,GSM,GPS,
ACC, RELAY, POWER, MS
BATTERY:90%
GPRS:SUCCESS
GSM:HIGH,53
GPS:FIXED,8
MS:LIS3DH;
VERSION VERSION# IMEI, IMSI, ICCID, SYSTEM,
VERSION, BUILD TIME
IMEI:354188046487208
IMSI:9460040890315878
ICCID:898602B8191750035878
SYSTEM:M6000_V1.8.7
VERSION:MXAPP_V2.0.6
BUILD:Oct 28 2017 16:19:22
Position drift Serious position drift will be found in places where GPS signal is
poor. Please drive the vehicle to the open places.
Commands receiving abnormally
1）Check the commands format.
2）Check if the vehicle is in the places where there is GSM signal
3）Check if the SIM card is properly installed.
Inhaltsverzeichnis
Andere MICODUS GPS Handbücher
MICODUS
MICODUS MP90G Bedienungsanleitung
MICODUS
MICODUS MV730 Bedienungsanleitung
MICODUS
MICODUS MV55G Bedienungsanleitung
MICODUS
MICODUS MV501G Bedienungsanleitung
MICODUS
MICODUS MP80G Bedienungsanleitung
MICODUS
MICODUS MV33 Bedienungsanleitung
MICODUS
MICODUS MV790 Bedienungsanleitung
MICODUS
MICODUS MV33 Bedienungsanleitung
MICODUS
MICODUS MV720 Bedienungsanleitung
MICODUS
MICODUS MV110 Bedienungsanleitung
MICODUS
MICODUS MV730 Bedienungsanleitung
MICODUS
MICODUS MV930 Bedienungsanleitung
MICODUS
MICODUS MV790G Bedienungsanleitung
MICODUS
MICODUS MV930G 4G Bedienungsanleitung
MICODUS
MICODUS MV740 Bedienungsanleitung
MICODUS
MICODUS MV901N Bedienungsanleitung
MICODUS
MICODUS ML500 Bedienungsanleitung
MICODUS
MICODUS MV710G Bedienungsanleitung
MICODUS
MICODUS ML808G Bedienungsanleitung
MICODUS
MICODUS MV710G Bedienungsanleitung
