MICODUS MV33 Bedienungsanleitung
MV33 User Manual V1.0
Learn how to set up your new MiCODUS Tracker
Copyright ©2022 MiCODUS | All Rights Reserved
R
2.Specifications
Model
Weight
Dimensions
Backup Battery
Working Time
MV33
69g
45mm(L) * 25mm(W) * 38mm(H)
1-2 hours
Device Information
Working Voltage
Working Current
Sleep Current
Battery Capacity
Working Temperature
Working Humidity
Working Frequency
SIM Card
Cellular Antenna
Positioning Type
GPS Antenna
Cold Start
Hot Start
Tracking sensitivity
GPS Channels
Position Accuracy
GSM/GPRS
Built-in
≤32 Seconds
≤1 Second
-162 dBm
64
5-10m
2G GSM: 850/900/1800/1900MHz
Nano SIM Card
Built-in
DC 9-40V
<30 mA
<15 uA
3.7V 80mAh Lion Polymer battery
-20℃- 70℃
10%-85%RH non-condensing
Working Parameters
Cellular Specifications
GNSS Specifications
Compact Size GPS+LBS
Dual Positioning
Plug & Play
Overspeed
Alarm
Plug Out Alarm Geo-fence
Vibration Alert
1. Main Features
9-90V Wide
Working Voltage Voice Monitor
Movement
Alarm
4. Activate Device
LED Event State
Charging
Charger has not been inserted
Searching for network
POWER LED (RED)
GSM LED (GREEN)
Network has been registered
Solid
Dark
Flash every 1 second
Solid
Flash every 1 second
Solid
GPS has fixed
GPS is in fixing
Device is working but stopped more than 5min
Device has not been turn on
Device ran out of battery
GPS LED (Blue)
ALL LED ALL LED TURN OFF
Install the SIM card via the correct direction as below:
apn123456+space+
apn name
apnuser123456+
space+apnuser
apnpasswd123456+
space+apnpassword
apn ok
apnuser ok
apnpasswd
ok
apn123456 cmnet
apnuser123456 cmnet
SMS Command
Format Reply Example Note
Please get the exact correct APN name from
local SIM card provider.“cmnet” is just an
example of APN name.
apnpasswd123456 123
lf the SIM card operator doesn’t have APN user
name,then please ignore this configuration
Normal SIM
Note: The APN information is very important, it must 100% correct to match with the sim card of
the tracker, if you configured wrong APN, the tracker also will reply "SET APN ok" but it will
can't get online!
Please get the exact correct APN name from local SIM card provider.Take the tracker to
a good signal place for operation and configure the APN for it as below:
5. Activate Device
GPS Main Unit
Function Cable
User Guide
Genuine Packing Box
x 1
x 1
x 1
x 1
6. Applications
7. Functions Explanation
a. Voice Monitor:
* Set admin number by this sms command:
admin123456+space+mobile number with country code
* Switch the tracker to voice monitor mode
by this sms command:monitor123456
b. Vibration Alert:
This vibration alert function just work under stationary
status. How to use this function:
* Enable the device to enter into arm mode by this
sms command: 111
* Conifgure the alarm ways by this sms command:
vibalm123456
* Set admin number by this sms command:
admin123456+space+mobile number with country code
* Keep the device under stationary status more than 5min to let it enter into sleep arm mode;
* Vibrate the device then the tracker will send the vibration alarm messages
* Dial the sim number of the tracker from the admin
number, then the tracker will pick up the call automatically
and you will can remote monitor the voice around it.
For example:
admin123456 0086134********
admin ok
monitor ok
MV33
monitor123456
For example:
admin123456 0086134********
admin ok
arm ok
MV33
111
vibrate sms alarm set ok
vibalm123456
Please follow with the quick user guide carefully!
8. Installation Recomendation
Where is the OBD interface?
Most of the car's OBD interface is located in A and B,
A small part of the car will be in C,D and E.
Where is the OBD interface?
Most of the car‘s OBD interface is located in A and B,
A small part of the car will be in C,D and E.
Explanation
Area A VW、Ford、Toyota 、Hyundai 、Citroen、BMW、
etc./Most cars.
Explanation
Area B Honda,Lexus,etc.
Explanation
Area C Dongfeng Citronen,etc.
Explanation
Area D/E A few cars...
9. Troubleshooting
10. Full SMS Commands List
Set Admin Number
Back to Factory Setting
admin123456+space+mobile number
with country code
begin123456
After sent this sms command, all your configuration
will be cleared and the device will get back to
factory default settings
The password just can be 6 digitals
After sent this sms command, the configurations
will be saved and the device will restart
Please add your country code as prefix
of the admin number
Restart rst
Please get the exact correct APN name from the
SIM card provider of the tracker, "cmnet" is China
Mobile's APN name
apn+123456+apn content
APN
Password Change password+old password+space+
new password
If the SIM card operator doesn't have APN user,
then please ignore this configuration
If the SIM card operator doesn't have APN
password, then please ignore this configuration
apnuser+123456+space+content
apnuser+123456+space+content
Functions Command Format Explanation
Unable to connect to
tracking platform
Check the APN and settings.
Check whrther the data service of SIM card is enabled.
Check the balance of SIM card.
Tracker shows offline
Check whether external power is still connected.
Check if the vehicle entered netword blind area.
Check the balance of SIM card.
Type Use
Location drift
In area with poor GNSS signal (tall building around or
basement), drifting may happen.
Check whether vibration happens around to trigger the
accelerator.
Unable to locate
Make sure the top side facing upward without metallic things
shielded.
Make sure it’s not in area with no satellite coverage.
No command reply
Make sure command format is correct.
Vehicle may be in network blind area.
Make sure SIM card is well inserted and has SMS servi.
Functions Command Format Explanation
IP&Port
Domain
Google Maps Link
adminip+123456+space+ip
+space+port
Micodus tracking platform's IP: 47.254.77.28;
Port: 7700
MiCODUS server domain: d.micodus.net, Port: 7700
SZCS,123456,DOMAIN=d.micodus.
net:7700
G123456# or where
V:A: Indicates the device has GPS signal;
V:V: Indicates the device doesn't have GPS signal;
2019-11-26 10:17:01: Date and Time;
S: 000km/h: Speed of the tracker
Bat:5: Battery level of the backup battery of the
tracker, it has 6 levels: "6" means 100% , "5" 80%,
"4" means 60%, "3" means 40%, "2" means 20%,
"1" means 10%;
ACC: off: The status of the car engine;
7201000006: ID number of the device;
S26: GSM signal is 26
G06: GPS signal is 06
p:46000, l:13152, c:63162: p,l,c this 3 parameters
means the LBS code
Data Upload Frequency upload123456+space+time Time interval scope: 10-180s
Movement alarm distance scope: 100-1000m
If east time zone, needn't input sign "+", for example, if
the time zone is East 8, then the sms command should
be sent like this: timezone123456 8
firmware version、ID、IP、port、domain、APN
admin number, SOS number,move distance, overspeed,
auto arm time, auto disarm time, alarm interval
BAT:10 GPRS: GSM: GPS:A/V ACC:on/off oil:on/off
power:on/off
Parameter Query
Status
Arm
param1
param2
status
111 or SF
Time Zone timezone+123456+space+GMT No.
Disarm 000 or CF
Movement Alarm move+alarm distance
Overpeed alarm speed scope: 20-150km/h
Overspeed Alarm speed+123456+space+080(km/h)
IMEI Checking imei+123456
Sleep Mode
sleep123456 time
sleep123456 shock
sleep123456 off
Functions Command Format Explanation
Vibrate Alarm
vibx,y x=1-3( 1: SMS alarm, 2: Call alarm, 3: SMS first then Call );
y=1-9,1 is the most sensitive
Cancel sleep mode
vibcall+123456
Vibrate call alarm set ok (
If device keep stationary more than
5 minutes the device will enter into sleep mode automatically,
vibration, sms commands and call can wake up it)
Vibrate sms alarm set ok(If device keep stationary more than
5 minutes the device will enter into sleep mode automatically,
vibration, sms commands and call can wake up it)
vibalm+123456
Voice Monitor
Track Mode
monitor123456
Note: This command is used to switch the tracker to monitor
mode, then dial the sim number of the tracker from the admin
number, the device will pick up call automatically.
Note: This command is used to switch the tracker back to
track mode after voice monitor
tracker123456
If device keep stationary more than 5 minutes the device will
enter into sleep mode automatically, sms commands and
call can wake up it
If device keep stationary more than 5 minutes the device will
enter into sleep mode automatically, vibration, sms
commands and call can wake up it
E-mail: [email protected]
Skype: MiCODUS
11. Any Questions?
12. Download the APP
Download on the
APP Store
Download for
Android
Search "MiCODUS" in iOS APP store or Google Play
Store, or just scan the QR code as below to download
MiCODUS APP:
Andere Handbücher für MV33
1
Inhaltsverzeichnis
Andere MICODUS GPS Handbücher
MICODUS
MICODUS MV901 Bedienungsanleitung
MICODUS
MICODUS ML500G Bedienungsanleitung
MICODUS
MICODUS ML500 Bedienungsanleitung
MICODUS
MICODUS MV720 Bedienungsanleitung
MICODUS
MICODUS MV730G Bedienungsanleitung
MICODUS
MICODUS MV790G Bedienungsanleitung
MICODUS
MICODUS ML208G Bedienungsanleitung
MICODUS
MICODUS MP90G Bedienungsanleitung
MICODUS
MICODUS MV55G Bedienungsanleitung
MICODUS
MICODUS MV930 Bedienungsanleitung
MICODUS
MICODUS MV720 Bedienungsanleitung
MICODUS
MICODUS MV33 Bedienungsanleitung
MICODUS
MICODUS MV790 Bedienungsanleitung
MICODUS
MICODUS MV501G Bedienungsanleitung
MICODUS
MICODUS MV740 Bedienungsanleitung
MICODUS
MICODUS MV901N Bedienungsanleitung
MICODUS
MICODUS MV730 Bedienungsanleitung
MICODUS
MICODUS MV110 Bedienungsanleitung
MICODUS
MICODUS MP80G Bedienungsanleitung
MICODUS
MICODUS ML808G Bedienungsanleitung
