Microlife BP W100 MAM Wrist Bedienungsanleitung

Misuratore di pressione

evoluto con tecnologia MAM

BP MAM Wrist

IB BP W100-mam 4G V4-IT 1423

Revision Date: 2023-03-09

Colpharma s.r.l.

Parma - Italy

www.colpharma.com

Distributore per l’Italia

EN 1

IT 14

FR 28

DE 42

Microlife UAB

P. Lukšio g. 32

08222 Vilnius

Lithuania

Microlife Corporation

9F, 431, RuiGuang Road, Neihu

Taipei 11492, Taiwan, China

www.microlife.com

Microlife MAM Wrist BP MAM WristGuarantee Card

Name of Purchaser / Nome del rivenditore /

Nom de l’acheteur / Name des Käufers

Serial Number / Numero di serie /

Numéro de série / Serien-Nr.

Date of Purchase / Data d’acquisto /

Date d’achat / Kaufdatum

Specialist Dealer / Categoria rivenditore /

Revendeur / Fachhändler

1Microlife BP W100 – MAM Wrist EN

Display

Microlife BP W100 – MAM Wrist EN

1ON/OFF button

2Display

3M-button (memory)

4Battery compartment

5Cuff

6Systolic value

7Diastolic value

8Pulse rate

9Stored value

AT MAM Mode

AK Irregular heartbeat (IHB) symbol

AL Battery display

AM Pulse

Read the important information in these

instructions for use before using this device.

Follow the instructions for use for your safety

and keep it for future reference.

Type BF applied part

Keep dry

Manufacturer

Batteries and electronic devices must be

disposed of in accordance with the locally

applicable regulations, not with domestic

waste.

Authorized representative

in the European Community

Model number

Catalogue number

Serial number

(YYYY-MM-DD-SSSSS;

year-month-day-serial number)

Intended use:

This oscillometric blood pressure monitor is intended for measuring

non-invasive blood pressure in people aged 12 years or older.

Dear Customer,

Your new Microlife blood pressure monitor is a reliable medical

device for taking measurements on the wrist. It is simple to use,

accurate and comes highly recommended for blood pressure moni-

toring in your home. This device was developed in collaboration with

physicians and clinical tests prove its measurement accuracy to be

very high.*

If you have any questions, problems or want to order spare parts

please contact your local Microlife-Customer Service. Your dealer or

pharmacy will be able to give you the address of the Microlife dealer

in your country. Alternatively, visit the internet at www.microlife.com

where you will find a wealth of invaluable information on our

products.

Stay healthy – Microlife AG!

* This device is clinically tested according to the British and Irish

Hypertension Society (BIHS) protocol. Highest possible grading for

Systolic (A) and Diastolic (A) measurement accuracy.

Table of contents

1. Important facts about blood pressure and

self-measurement

How do I evaluate my blood pressure

2. Using the device for the first time

Caution

Temperature limitation

Humidity limitation

Medical device

Protected against solid foreign objects of 12.5

mm Ø and greater. Protected against verti-

cally falling water drops when enclosure tilted

up to 15°.

Keep away from children of age 0 - 3

CE Marking of Conformity

IP22

3Microlife BP W100 – MAM Wrist EN

Selecting standard or MAM mode

MAM-Mode

3. Taking a blood pressure measurement

Checklist for taking a reliable measurement

4. Appearance of the irregular heartbeat (IHB) symbol

5. Data memory

6. Battery indicator and battery change

Low battery

Flat battery - replacement

Using rechargeable batteries

7. Error Messages

8. Safety, care, accuracy test and disposal

Device care

Cleaning the cuff

Accuracy test

Disposal

9. Guarantee

10. Technical Specifications

1. Important facts about blood pressure and

self-measurement

Blood pressure is the pressure of the blood flowing in the

arteries generated by the pumping of the heart. Two values, the

systolic (upper) value and the diastolic (lower) value, are

always measured.

The device indicates the pulse rate (the number of times the

heart beats in a minute).

Permanently high blood pressure values can damage your

health and must be treated by your doctor!

Always discuss your values with your doctor and tell them if you

have noticed anything unusual or feel unsure. Never rely on

single blood pressure readings.

There are several causes of excessively high blood pressure

values. Your doctor will explain them in more detail and offer

treatment where appropriate.

Under no circumstances should you alter the dosages of

drugs or initiate a treatment without consulting your doctor.

Depending on physical exertion and condition, blood pressure is

subject to wide fluctuations as the day progresses. You should

therefore take your measurements in the same quiet condi-

tions and when you feel relaxed! Take at least two readings

every time (in the morning: before taking medications and eating

/ in the evening: before going to bed, bathing or taking medica-

tion) and average the measurements.

It is quite normal for two measurements taken in quick succession

to produce significantly different results.

Deviations between measurements taken by your doctor or in

the pharmacy and those taken at home are quite normal, as these

situations are completely different.

Several measurements provide much more reliable information

about your blood pressure than just one single measurement.

Leave a small break of 5 minutes between two measurements.

If you suffer from an irregular heartbeat (arrhythmia, see Section

«Appearance of the irregular heartbeat (IHB) symbol»), measure-

ments taken with this device should be evaluated with your

doctor.

The pulse display is not suitable for checking the frequency

of heart pacemakers!

If you are pregnant, you should monitor your blood pressure

regularly as it can change drastically during this time.

How do I evaluate my blood pressure

Table for classifying blood pressure values in adults in accordance

with the World Health Organisation (WHO) in 2003. Data in mmHg.

The higher value is the one that determines the evaluation. Example:

a blood pressure value of 140/80 mmHg or a value of 130/90 mmHg

indicates «blood pressure too high».

2. Using the device for the first time

Selecting standard or MAM mode

This device enables you to select either standard (standard single

measurement) or MAM mode (automatic triple measurement). To

A number of factors can affect the accuracy of measure-

ments taken on the wrist. In some cases, the result may

differ from the measurement taken on the upper arm. We

therefore advise you to compare these values with those

produced by the upper arm measurement and discuss them

with your doctor.

Range Systolic Diastolic Recommendation

1. blood pressure

normal

< 120 < 80 Self-check

2. blood pressure

normal

120 - 129 80 - 84 Self-check

3. blood pressure

slightly high

130 - 139 85 - 89 Consult your doctor

4. blood pressure

too high

140 - 159 90 - 99 Seek medical

advice

5. blood pressure

far too high

160 - 179 100 - 109 Seek medical

advice

6. blood pressure

dangerously high

≥180 ≥110 Urgently seek

medical advice!

5Microlife BP W100 – MAM Wrist EN

select standard mode, press the MAM button 3 for 3 seconds while

the device is switched off until «ON» starts flashing. Press the ON/

OFF button 1 to switch from «ON» to «OFF». The device is now set

to standard mode (single measurement). The device then automati-

cally turns off. To select MAM mode, repeat the sequence above

until «ON» and the MAM symbol appears in the display. The MAM

symbol is permanently displayed and the device is now set to MAM

mode (automatic triple measurement).

MAM-Mode

In MAM mode, 3 measurements are automatically taken in

succession and the result is then automatically analysed and

displayed. Because the blood pressure constantly fluctuates, a

result determined in this way is more reliable than one produced

by a single measurement.

After pressing the ON/OFF button 1, the MAM-symbol AT

appears in the display.

The bottom, right hand section of the display shows a 1, 2 or 3 to

indicate which of the 3 measurements is currently being taken.

There is a break of 15 seconds between the measurements

(15 seconds are adequate according to ««Blood Pressure Moni-

toring, 2001, 6:145-147»» for oscillometric instruments). A count

down indicates the remaining time and a beep will sound

5 seconds before the 2nd and 3rd readings will begin.

The individual results are not displayed. Your blood pressure will

only be displayed after all 3 measurements are taken.

Do not remove the cuff between measurements.

If one of the individual measurements was questionable, a fourth

one is automatically taken.

3. Taking a blood pressure measurement

Checklist for taking a reliable measurement

1. Avoid activity, eating or smoking immediately before the

measurement.

2. Sit down on a back-supported chair and relax for 5 minutes. Keep

your feet flat on the floor and do not cross your legs.

3. Always measure in a sitting position and on the same wrist. Use

the wrist which usually shows higher blood pressure values.

4. Remove any items of clothing and your watch, for example, so

that your wrist is free.

5. Always ensure that the cuff is positioned correctly, as shown in

the pictures illustrated on the short instruction card.

6. Fit the cuff comfortably but not too tight. The cuff will cover a wrist

circumference according to the information in the «Technical

Specifications».

7. Support your arm in a relaxed position and ensure that the device

is at the same height as your heart.

8. Press the ON/OFF button 1 to start the measurement.

9. The cuff will now pump up automatically. Relax, do not move and

do not tense your arm muscles until the measurement result is

displayed. Breathe normally and do not talk.

10.When the correct pressure is reached, the pumping stops and the

pressure falls gradually. If the required pressure was not reached,

the device will automatically pump some more air into the cuff.

11.During the measurement, the heart symbol AM flashes in the

display and a beep sounds every time a heartbeat is detected.

12.The result, comprising the systolic 6 and the diastolic 7 blood

pressure and the pulse rate 8 is displayed and a long beep is

heard. Note also the explanations on further display symbols in

this booklet.

13.Remove and switch off the monitor and enter the result in the

enclosed blood pressure pass. (The monitor does switch off auto-

matically after approx. 1 min.).

4. Appearance of the irregular heartbeat (IHB) symbol

This symbol AK indicates that an irregular heartbeat was detected.

In this case, the measured blood pressure may deviate from your

actual blood pressure values. It is recommended to repeat the

measurement.

5. Data memory

This device automatically stores up to 30 measurement values for

each of the 2 users.

6. Battery indicator and battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol

AL will flash as soon as the device is switched on (partly filled battery

displayed). Although the device will continue to measure reliably,

you should obtain replacement batteries.

Flat battery - replacement

When the batteries are flat, the battery symbol AL will flash as soon

as the device is switched on (flat battery displayed). You cannot take

any further measurements and must replace the batteries.

1. Open the battery compartment 4 by pulling off the cap.

You can stop the measurement at any time by pressing the

ON/OFF button or open the cuff (e.g. if you feel uneasy or an

unpleasant pressure sensation).

Information for the doctor in case of repeated appearance

of the IHB symbol:

This device is an oscillometric blood pressure monitor that also

measures the pulse during blood pressure measurement and indi-

cates when the heart rate is irregular.

7Microlife BP W100 – MAM Wrist EN

2. Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

Using rechargeable batteries

You can also operate this device using rechargeable batteries.

7. Error Messages

If an error occurs during the measurement, the measurement is

interrupted and an error message, e.g. «ERR 3», is displayed.

Use 2 new, long-life 1.5 V, size AAA alkaline batteries.

Do not use batteries beyond their date of expiry.

Remove batteries if the device is not going to be used for a

prolonged period.

Only use «NiMH» type reusable batteries.

Batteries must be removed and recharged when the flat

battery symbol appears. They should not remain inside the

device as they may become damaged (total discharge as a

result of low use of the device, even when switched off).

Always remove the rechargeable batteries if you do not intend

to use the device for a week or more.

Batteries cannot be charged in the blood pressure monitor.

Recharge batteries in an external charger and observe the

information regarding charging, care and durability.

Error Description Potential cause and remedy

«ERR 1» Signal too

weak

The pulse signals on the cuff are too

weak. Re-position the cuff and repeat the

measurement.*

«ERR 2» Error signal During the measurement, error signals

were detected by the cuff, caused for

instance by movement or muscle

tension. Repeat the measurement,

keeping your arm still.

«ERR 3» No pressure

in the cuff

An adequate pressure cannot be gener-

ated in the cuff. A leak may have

occurred. Check that the cuff is correctly

connected and is not too loose. Replace

the batteries if necessary. Repeat the

measurement.

If the 2-year warranty period has expired,

it is recommended to replace with a new

Microlife cuff available at your pharmacy.

* Please immediately consult your doctor, if this or any other problem

occurs repeatedly.

8. Safety, care, accuracy test and disposal

Follow instructions for use. This document provides important

product operation and safety information regarding this device.

Please read this document thoroughly before using the device

and keep for future reference.

This device may only be used for the purposes described in these

instructions. The manufacturer cannot be held liable for damage

caused by incorrect application.

This device comprises sensitive components and must be treated

with caution. Observe the storage and operating conditions

described in the «Technical Specifications» section.

The cuffs are sensitive and must be handled with care.

Only pump up the cuff once fitted.

Do not use this device if you think it is damaged or notice anything

unusual.

Never open this device.

Read the additional safety information provided within the indi-

vidual sections of this instruction manual.

«ERR 5» Abnormal

result

The measuring signals are inaccurate

and no result can therefore be displayed.

Read through the checklist for taking a

reliable measurement and then repeat

the measurement.*

«ERR 6» MAM Mode There were too many errors during the

measurement in MAM mode, making it

impossible to obtain a final result. Read

through the checklist for taking a reliable

measurement and then repeat the

measurement.*

«HI» Pulse or cuff

pressure too

high

The pressure in the cuff is too high (over

299 mmHg) OR the pulse is too high

(over 200 beats per minute). Relax for 5

minutes and repeat the measurement.*

«LO» Pulse too low The pulse is too low (less than 40 beats

per minute). Repeat the measurement.*

Error Description Potential cause and remedy If you think the results are unusual, please read through the

information in «Section 1.» carefully.

Safety and protection

Inhaltsverzeichnis

Sprachen:

Andere Microlife Blutdruckmessgerät Handbücher

Microlife

Microlife BP 3BM1-3 Bedienungsanleitung

Microlife

Microlife WatchBP Office ABI Bedienungsanleitung

Microlife

Microlife BP A80 Bedienungsanleitung

Microlife

Microlife BP 3AG1 Bedienungsanleitung

Microlife

Microlife aponorm Mobil Soft Control Bedienungsanleitung

Microlife

Microlife BP W3 Comfort Bedienungsanleitung

Microlife

Microlife Aponorm Basis Control Bedienungsanleitung

Microlife

Microlife BPB3 AFIB Bedienungsanleitung

Microlife

Microlife WatchBP Home Bedienungsanleitung

Microlife

Microlife BP A200 AFIB Bedienungsanleitung

Microlife

Microlife 3BU1-5 Bedienungsanleitung

Microlife

Microlife BP W2 Slim Bedienungsanleitung

Microlife

Microlife BP AG1-30 Bedienungsanleitung

Microlife

Microlife BPB6 Connect Bedienungsanleitung

Microlife

Microlife BP AG1-10 Bedienungsanleitung

Microlife

Microlife BP B3 Comfort PC Bedienungsanleitung

Microlife

Microlife BP A200 AFIB Bedienungsanleitung

Microlife

Microlife BP A6 PC Bedienungsanleitung

Microlife

Microlife BP W100 Bedienungsanleitung

Microlife

Microlife BP A3L Comfort Bedienungsanleitung

Microlife

Microlife BP A150 AFIB Bedienungsanleitung

Microlife

Microlife BP AG1-40 Bedienungsanleitung

Microlife

Microlife BP A50 Bedienungsanleitung

Microlife

Microlife BP A7 Touch Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung