Microlife BP W2 Slim Bedienungsanleitung

IB BP W2 Slim BY-V3 2117

Microlife AG

Espenstrasse 139

9443 Widnau / Switzerland

www.microlife.com

www.microlife.by

www.microlife.bg

www.microlife.com

Прибор для измерения

артериального давления

электронный BP W2 Slim

EN 1

RU 10

BG 22

Microlife BP W2 Slim BP W2 SlimGuarantee Card

www.microlife.by

www.microlife.bg

www.microlife.com

1BP W2 Slim EN

Display

Read the instructions carefully before using this device.

Dear Customer,

Your new

Microlife

blood pressure monitor is a reliable medical device

for taking measurements on the wrist. It is simple to use, accurate and

comes highly recommended for blood pressure monitoring in your

home. This device was developed in collaboration with physicians and

clinical tests prove its measurement accuracy to be very high.*

Please read through these instructions carefully so that you under-

stand all functions and safety information. We want you to be happy

with your Microlife product. If you have any questions, problems or

want to order spare parts please contact your local Microlife-

Customer Service. Your dealer or pharmacy will be able to give you

the address of the Microlife dealer in your country. Alternatively, visit

the internet at www.microlife.com where you will find a wealth of

invaluable information on our products.

Stay healthy – Microlife AG!

* This device is tested according to the ESH protocol and ISO81060-2:2013.

Microlife BP W2 Slim EN

1ON/OFF button

2Display

3Battery Compartment

4Cuff

5M-button (memory)

6Time Button

7User Switch

8Systolic Value

9Diastolic Value

AT Pulse Rate

AK Date/Time

AL User Indicator

AM Traffic Light Indicator

AN Stored Value

AO Heart Arrhythmia Indicator

AP Pulse Indicator

AQ Battery Display

AR Arm Movement Indicator

AS Cuff Check Indicator

Table of Contents

1. Important Facts about Blood Pressure and Self-Measurement

• How do I evaluate my blood pressure?

2. Using the Device for the First Time

• Inserting the batteries

• Setting the date and time

• Selecting the user

3. Taking a Blood Pressure Measurement using this Device

4. Appearance of the Heart Arrhythmia Indicator for early

Detection

5. Traffic Light Indicator in the Display

6. Data Memory

• Viewing the stored values

• Memory full

• Clearing all values

• How not to store a reading

7. Battery Indicator and Battery change

• Low battery

• Flat battery – replacement

• Which batteries and which procedure?

• Using rechargeable batteries

8. Error Messages

9. Safety, Care, Accuracy Test and Disposal

• Safety and protection

•Devicecare

• Cleaning the cuff

• Accuracy test

•Disposal

10. Guarantee

11. Technical Specifications

Type BF applied part

1. Important Facts about Blood Pressure and Self-

Measurement

•

Blood pressure

is the pressure of the blood flowing in the arteries

generated by the pumping of the heart. Two values, the

systolic

(upper) value and the

diastolic

(lower) value, are always measured.

•The device indicates the pulse rate (the number of times the heart

beats in a minute).

•Permanently high blood pressure values can damage your

health and must be treated by your doctor!

•Always discuss your values with your doctor and tell him/her if you

have noticed anything unusual or feel unsure. Never rely on

single blood pressure readings.

Keep dry

3BP W2 Slim EN

•There are several causes of excessively high blood pressure

values. Your doctor will explain them in more detail and offer

treatment where appropriate. Besides medication, weight loss

and exercise can also lower your blood pressure.

•Under no circumstances should you alter the dosages of any

drugs prescribed by your doctor!

•

Depending on physical exertion and condition, blood pressure is

subject to wide fluctuations as the day progresses.

You should

therefore take your measurements in the same quiet conditions

and when you feel relaxed!

Take at least two readings every time

(in the morning and in the evening) and average the measurements.

•It is quite normal for two measurements taken in quick succession

to produce significantly different results.

•Deviations between measurements taken by your doctor or in the

pharmacy and those taken at home are quite normal, as these

situations are completely different.

•

Several measurements

provide much more reliable information

about your blood pressure than just one single measurement.

•

Leave a small break

of at least 15 seconds between two measurements.

•If you suffer from an irregular heartbeat (arrhythmia, see

«Section 4.»), measurements taken with this device should be

evaluated with your doctor.

•The pulse display is not suitable for checking the frequency

of heart pacemakers!

•If you are pregnant, you should monitor your blood pressure very

closely as it can change drastically during this time!



A number of factors can affect the accuracy of measure-

ments taken on the wrist.

In some cases, the result may differ

from the measurement taken on the upper arm. We therefore

advise you to compare these values with those produced by the

upper arm measurement and discuss them with your doctor.

How do I evaluate my blood pressure?

The higher value is the one that determines the evaluation. Example:

a blood pressure value of 140/80 mmHg or a value of 130/90 mmHg

indicates «blood pressure too high».

Table for classifying home blood pressure values in adults in accordance

with the international Guidelines (

ESH, AHA, JSH

). Data in mmHg.

Range Systolic Diastolic Recommendation

blood pressure too low 100 60 Consult your doctor

1. blood pressure

optimum

100 - 130 60 - 80 Self-check

2. blood pressure

elevated

130 - 135 80 - 85 Self-check

3. blood pressure too

high

135 - 160 85 - 100 Seek medical advice

4. blood pressure

dangerously high

160 100 Urgently seek

medical advice!

2. Using the Device for the First Time

Inserting the batteries

After you have unpacked your device, first insert the batteries. The

battery compartment

is on the bottom of the device. Insert the

batteries (

x 1.5 V, size

AAA

), thereby observing the indicated polarity.

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the

display. You can set the year by pressing the M-button 5. To

confirm and then set the month, press the time button 6.

2. Press the M-button to set the month. Press the time button to

confirm and then set the day.

3. Follow the instructions above to set the day, hour and minutes.

4. Once you have set the minutes and pressed the time button, the

date and time are set and the time is displayed.

5. If you want to change the date and time, press and hold the time

button down for approx. 3 seconds until the year number starts to

flash. Now you can enter the new values as described above.

Selecting the user

This device allows to store the results for 2 individual users.



Before each measurement, set the user switch 7for the

intended user: user 1 or user 2.



User 1: slide the user switch 7to the left to the user 1 icon.



User 2: slide the user switch 7to the right to the user 2 icon.

The first person to measure should select user 1.

3. Taking a Blood Pressure Measurement using this Device

Checklist for taking a reliable measurement

1. Avoid activity, eating or smoking immediately before the measurement.

2. Sit down for at least 5 minutes before the measurement and relax.

3. Always measure in a sitting position and on the same wrist. Use

the wrist which usually shows higher blood pressure values.

4. Remove any items of clothing and your watch, for example, so

that your wrist is free.

5. Always ensure that the cuff is positioned correctly, as shown in the

pictures illustrated on the short instruction card.

6. Fit the cuff comfortably but not too tight. The cuff will cover a wrist

circumference of 13.5 - 23 cm (5.25 - 9.05 inches).

7. Support your arm in a relaxed position and ensure that the device

is at the same height as your heart.

8. Press the ON/OFF button 1to start the measurement.

9. The cuff will now pump up automatically. Relax, do not move and

do not tense your arm muscles until the measurement result is

displayed. Breathe normally and do not talk.

10.The measurement is performed during the inflation. The inflation

speed may vary, this is a normal occurence.

11.During the measurement, the pulse indicator

flashes in the display.

12.The result, comprising the systolic 8and the diastolic 9blood

pressure and the pulse rate AT is displayed. Note also the expla-

nations on further display symbols in this booklet.

5BP W2 Slim EN

13.Remove and switch off the monitor and enter the result in the

enclosed blood pressure pass. (The monitor does switch off auto-

matically after approx. 1 min.).

4. Appearance of the Heart Arrhythmia Indicator for

early Detection

This symbol

indicates that certain pulse irregularities were detected

during the measurement. In this case, the result may deviate from your

normal blood pressure – repeat the measurement. In most cases, this is

no cause for concern. However, if the symbol appears on a regular basis

(e.g. several times a week with measurements taken daily) we advise you

to tell your doctor. Please show your doctor the following explanation:

5. Traffic Light Indicator in the Display

The bars on the left-hand edge of the display AM show you the range

within which the indicated blood pressure value lies. Depending on

the height of the bar, the readout value is either within the optimum

(green), elevated (yellow), too high (orange) or dangerously high

(red) range. The classification corresponds to the 4 ranges in the

table as defined by the international guidelines (ESH, AHA, JSH), as

described in «Section 1.».

6. Data Memory

This device automatically stores up to 60 measurement values for

each of the 2 users.

Viewing the stored values

Select either user 1 or 2 with the user switch 7.

Press the M-button 5briefly, when the device is switched off. The

display first shows «M» AN and then a value, e.g. «M 17». This

means that there are 17 values in the memory. The device then

switches to the last stored result.

Pressing the M-button again displays the previous value. Pressing

the M-button repeatedly enables you to move from one stored value

to another.

Information for the doctor on frequent appearance of the

Arrhythmia indicator

This device is an oscillometric blood pressure monitor that also analyses

pulse frequency during measurement. The device is clinically tested.

The arrhythmia symbol is displayed after the measurement, if pulse

irregularities occur during measurement. If the symbol appears more

frequently (e.g. several times per week on measurements performed

daily) we recommend the patient to seek medical advice.

This device does not replace a cardiac examination, but serves to

detect pulse irregularities at an early stage.

Memory full



Pay attention that the maximum memory capacity of 60 memo-

ries per user is not exceeded.

When the 60 memory is full, the

oldest value is automatically overwritten with the 61st value.

Values should be evaluated by a doctor before the memory

capacity is reached – otherwise data will be lost.

Clearing all values

Make sure the correct user is activated.

If you are sure that you want to permanently remove all stored

values, hold down the M-button (the device must have been switched

off beforehand) until «CL» appears and then release the button. To

permanently clear the memory, press the M-button while «CL» is

flashing. Individual values cannot be cleared.

How not to store a reading

As soon as the reading is displayed press and hold the ON/OFF

button 1until «M» AN is flashing. Confirm to delete the reading by

pressing the M-button 5.

7. Battery Indicator and Battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol AQ

will flash as soon as the device is switched on (partly filled battery

displayed). Although the device will continue to measure reliably, you

should obtain replacement batteries.

Flat battery – replacement

When the batteries are flat, the battery symbol AQ will flash as soon

as the device is switched on (flat battery displayed). You cannot take

any further measurements and must replace the batteries.

1. Open the battery compartment 3by pulling off the cap.

2. Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

3. To set date and time, follow the procedure described in «Section 2.».

The memory retains all values although date and time must be

reset – the year number therefore flashes automatically after

the batteries are replaced.

Which batteries and which procedure?

Use 2 new, long-life 1.5 V, size AAA alkaline batteries.

Do not use batteries beyond their date of expiry.

Remove batteries if the device is not going to be used for a

prolonged period.

Using rechargeable batteries

You can also operate this device using rechargeable batteries.

Only use «NiMH» type reusable batteries.

Batteries must be removed and recharged when the flat

battery symbol appears. They should not remain inside the

7BP W2 Slim EN

device as they may become damaged (total discharge as a

result of low use of the device, even when switched off).

Always remove the rechargeable batteries if you do not intend

to use the device for a week or more.

Batteries cannot be charged in the blood pressure monitor.

Recharge batteries in an external charger and observe the

information regarding charging, care and durability.

8. Error Messages

If an error occurs during the measurement, the measurement is inter-

rupted and an error message, e.g. «ERR 3», is displayed.

* Please consult your doctor, if this or any other problem occurs

repeatedly.

If you think the results are unusual, please read through the

information in «Section 1.» carefully.

9. Safety, Care, Accuracy Test and Disposal

Safety and protection

•This device may only be used for the purposes described in these

instructions. The manufacturer cannot be held liable for damage

caused by incorrect application.

Error Description Potential cause and remedy

ERR 1

» Signal too

weak

The pulse signals on the cuff are too weak. Re-

position the cuff and repeat the measurement.*

ERR 2

Error signal During the measurement, error signals were

detected by the cuff, caused for instance by

movement or muscle tension. Repeat the

measurement, keeping your arm still.

ERR 3

No pres-

sure in the

cuff

An adequate pressure cannot be generated

in the cuff. A leak may have occurred. Check

that the cuff is correctly connected and is not

too loose. Replace the batteries if necessary.

Repeat the measurement.

ERR 5

» Abnormal

result

The measuring signals are inaccurate and

no result can therefore be displayed. Read

through the checklist for performing reliable

measurements and then repeat the

measurement.*

» Pulse or cuff

pressure too

high

The pressure in the cuff is too high (over

299 mmHg) OR the pulse is too high (over

200 beats per minute). Relax for 5 minutes

and repeat the measurement.*

» Pulse too

low

The pulse is too low (less than 40 beats per

minute). Repeat the measurement.*

Error Description Potential cause and remedy

•This device comprises sensitive components and must be treated

with caution. Observe the storage and operating conditions

described in the «Technical Specifications» section.

•Protect it from:

- water and moisture

- extreme temperatures

- impact and dropping

- contamination and dust

- direct sunlight

- heat and cold

•The cuffs are sensitive and must be handled with care.

•Only pump up the cuff once fitted.

•

Do not use this device close to strong electromagnetic fields such as

mobile telephones or radio installations. Keep a minimum distance

3.3

m from such devices when using this device.

•Do not use this device if you think it is damaged or notice anything

unusual.

•Never open this device.

•If the device is not going to be used for a prolonged period the

batteries should be removed.

•Read the additional safety information provided within the indi-

vidual sections of this instruction manual.

•

The measurement results given by this device is not a diagnosis. It

is not replacing the need for the consultation of a physician, espe-

cially if not matching the patient’s symptoms. Do not rely on the

measurement result only, always consider other potentially occur-

ring symptoms and the patient’s feedback. Calling a doctor or an

ambulance is advised if needed.

Ensure that children do not use this device unsupervised;

some parts are small enough to be swallowed. Be aware of

the risk of strangulation in case this device is supplied with

cables or tubes.

Device care

Clean the device only with a soft, dry cloth.

Cleaning the cuff

Carefully remove any marks on the cuff with a damp cloth and mild

detergent.

Accuracy test

We recommend this device is tested for accuracy every 2 years or

after mechanical impact (e.g. being dropped). Please contact your

local Microlife-Service to arrange the test (see foreword).

Disposal

Batteries and electronic devices must be disposed of in accor-

dance with the locally applicable regulations, not with

domestic waste.

Andere Handbücher für BP W2 Slim

Inhaltsverzeichnis

Sprachen:

Andere Microlife Blutdruckmessgerät Handbücher

Microlife

Microlife WatchBP Home S Bedienungsanleitung

Microlife

Microlife BP 3BT0-A Bedienungsanleitung

Microlife

Microlife BP 3BTO-A Bedienungsanleitung

Microlife

Microlife BP A1 Easy Bedienungsanleitung

Microlife

Microlife BP W1 Basic Bedienungsanleitung

Microlife

Microlife WatchBP O3 Bedienungsanleitung

Microlife

Microlife BP A200 AFIB Bedienungsanleitung

Microlife

Microlife BP A80 Bedienungsanleitung

Microlife

Microlife BP B3 AFIB Bedienungsanleitung

Microlife

Microlife BP3GY1-2N Bedienungsanleitung

Microlife

Microlife BP 3AD1-A Bedienungsanleitung

Microlife

Microlife CVS 271249 Bedienungsanleitung

Microlife

Microlife BP A50 Bedienungsanleitung

Microlife

Microlife BP W90 Bedienungsanleitung

Microlife

Microlife BP B3 Comfort PC Bedienungsanleitung

Microlife

Microlife BP A1 Easy Bedienungsanleitung

Microlife

Microlife WatchBP Home Bedienungsanleitung

Microlife

Microlife BP A1 Easy Bedienungsanleitung

Microlife

Microlife BP 3AG1 Bedienungsanleitung

Microlife

Microlife BP W100 Bedienungsanleitung

Microlife

Microlife BP3GR1-3P Bedienungsanleitung

Microlife

Microlife WatchBP Office ABI Bedienungsanleitung

Microlife

Microlife AFID ADVANCED EASY Bedienungsanleitung

Microlife

Microlife BPB1 Classic Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung