MicroNet SP212D Bedienungsanleitung
Micronet
R
Faster and Easier Networks
User Manual
USB KVM Switch
Model No.: SP212D/SP214D
World Wide Web: www.micronet.com.tw ; www.micronet.info
1
Certificates
FCC
This equipment has been tested and found to comply with Part 15 of
the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received including
interference that may cause undesired operation.
CE
This equipment is in compliance with the requirements of the
following regulations: EN 55 022: CLASS B
2
Contents
Certificates...................................................................... 1
Chapter 1 Introduction .................................................. 3
1.1 Overview.............................................................. 3
1.2 System Requirements.......................................... 3
1.3 Features............................................................... 4
1.4 Package Contents................................................ 5
Chapter 2 Installation.................................................... 6
2.1 Hardware Installation............................................ 6
2.2 Install KVM Switcher ............................................. 8
Chapter 3 Operation ................................................... 10
3.1 Face-panel buttons.............................................. 10
3.2 Keyboard hotkeys................................................ 11
3.2.1. User-definable hotkeys ............................... 11
3.2.2. Universal hotkey ......................................... 11
3.2.3. KVM Switcher Software............................... 12
3.3 Switch to PC x by Operation Menu...................... 13
3.3.1 Switch to PC x by Keyboard Hotkeys ........... 14
3.3.2. Start Auto-scan............................................ 15
3.3.3. Stop Auto-scan............................................ 15
3.3.4. KVM Switcher configuration......................... 15
3.4 Define Hotkey commands................................... 15
3.5 Turn On Buzzer ................................................. 16
3.6 Fix Audio Port at PC x......................................... 17
3.7 Auto Scan Period ................................................ 17
Glossary ....................................................................... 10
3
Chapter 1 Introduction
1.1 Overview
The SP212D/SP214D is a 2/4-port Slim Palmtop USB KVM Switch
with optional audio and microphone switching function. It allows you
to access, control, boot and reboot multiple USB-enabled computers.
The independent audio/mic switching function allows an
uninterrupted audio experience on a same connected computer even
when you switch to another computer.
For Windows and Mac platforms, it provides an innovative and easy-
to-use KVM Switcher Software -- a small windows client application
to facilitate your KVM switching operations such as PC selection and
hotkey sequence programming, auto scan, auto scan delay time
programming, independent/simultaneous audio & PC switching, etc.
1.2 System Requirements
zOperation system should be DOS, Windows 95/98/SE,
Windows ME/2000/XP, Linux, MacOS, etc
4
1.3 Features
z2/4-port Slim Palmtop KVM Switch with Audio&Mic and 2/4 x
detachable USB KVM & 2/4 x Audio/Mic Cables
zUSB console support for USB keyboard and mouse
zAudio and Microphone switching for uninterrupted multimedia
experience across multi-platforms.
zUSB 1.1 Specification compliant
zIndependent/simultaneous switching of both PC and audio/mic
channel
zMulti-platform support for PCs and Macintosh G3/G4 MAC,
iMAC [For port switching on Mac, you should only use the face-
panel button]
zHot-plugging PCs for maintenance without powering down the
KVM Switch or PCs
zWindows-based Switching Software client for easy switching
zUser definable hotkeys
zAdditional universal port switching hotkey – ScrollLock +
ScrollLock – for PC platform.
zChannel selection by push button, keyboard hotkeys and Win-
based Switching Software Client
zLED indicators for easy status monitoring
zHigh VGA resolution 2048 x 1536
zUSB interface power
5
1.4 Package Contents
SP212D
z2-port KVM Switch
zUser manual
z2 * KVM cable
zManual & Utility CD
SP214D
z4-port KVM Switch
zUser manual
z4 * KVM cable
z4 * Audio cable
zManual & Utility CD
6
Chapter 2 Installation
2.1 Hardware Installation
1. Make sure that all computers are connected to the KVM Switch
and their peripherals are in power-off state.
2. Connect the shared USB keyboard, mouse and monitor to the
KVM switch.
3. Connect the shared speaker set and microphone to the KVM
switch (SP214D only).
4. Connect each of your computers to the KVM switch, using
appropriate KVM and/or Audio/Mic cables.
5. The KVM Switch should be automatically power-on with
computers connected.
6. Power up the connected computers one by one then the
keyboard and mouse will be recognized. Now, the KVM switch
can work normally.
Some older computers with USB interface might need to
manually enable the USB option in the BIOS settings before
you can use any USB devices. If your USB interface does
not work, please check the USB option in the BIOS.
7
If you use Windows 95/98/SE or Mac OS and has not yet
installed a USB mouse on your computer, there might be an
error message telling you that mouse is not detected and
prompting you to decide whether to ignore the same
message in the future, and yet you will find there is no
mouse movement to disable this message….So it is
suggested that you should installed your USB mouse on
your computer first, before connecting it to this KVM Switch.
SP214D Configuration Diagram
8
2.2 Install KVM Switcher
1. Insert the companion CD into your CD drive, and the Autorun
screen will pop up. (If the Autorun feature has not been enabled
on your computer. Just find the Autorun.exe on the CDROM and
double-click it to start).
2. For Windows/Mac: Just click the “Software Installation for
Window/Mac” to start installation.
(If the Mac version software does not start, you should then copy
it to your local Hard disk on Mac).
3. Follow the instructions to completion. If the instillation is
complete, you will see a KVM Switcher icon on the system tray
of your desktop.
9
4. Right-click to evoke the operation menu, and double-click to
evoke the configuration box.
The Windows switcher software is recommended for use on
Windows 98 SE or later. The Mac switcher software is
recommended for use on Mac OS 10.4 [Tiger].
Windows Mac OS
No live connection detected
Current active PC channel is on port 1
Current active PC channel is on port 2
The KVM Switcher Software supports both the Windows and
the Mac OS operating systems.
For other OS platforms such as Linux, you can still use the
keyboard hotkey - ScrLk + ScrLK - to switch PC. However,
this switching hotkey is not available on non-PC platform
such as MacOS.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere MicroNet Schalten Handbücher
MicroNet
MicroNet SP1684B Bedienungsanleitung
MicroNet
MicroNet SP1659P Bedienungsanleitung
MicroNet
MicroNet SP6008P Bedienungsanleitung
MicroNet
MicroNet SP6528 Bedienungsanleitung
MicroNet
MicroNet SP659A Bedienungsanleitung
MicroNet
MicroNet SP6108WS Bedienungsanleitung
MicroNet
MicroNet SP212E Bedienungsanleitung
MicroNet
MicroNet SP212E Bedienungsanleitung
MicroNet
MicroNet SP6005P4 Bedienungsanleitung
MicroNet
MicroNet SP698A Bedienungsanleitung
MicroNet
MicroNet SP616R Bedienungsanleitung
MicroNet
MicroNet SP3524A Bedienungsanleitung
MicroNet
MicroNet SP607FA Bedienungsanleitung
MicroNet
MicroNet SP6510P8 Bedienungsanleitung
MicroNet
MicroNet SP684C Bedienungsanleitung
MicroNet
MicroNet SP676C Bedienungsanleitung
MicroNet
MicroNet SP1678A Bedienungsanleitung
MicroNet
MicroNet SP6008P Bedienungsanleitung
MicroNet
MicroNet SP6124A Bedienungsanleitung
MicroNet
MicroNet SP1200A Bedienungsanleitung
Beliebte Schalten Handbücher anderer Marken
Ruijie
Ruijie RG-PF2920 Series Installations- und Betriebsanleitung
Altinex
Altinex DA1914SX Bedienungsanleitung
MiLAN
MiLAN MIL-SM2401M Bedienungsanleitung
RJM
RJM MASTERMIND PBC/6X Bedienungsanleitung
Atlas
Atlas MMK-KVM8 Bedienungsanleitung
Cabletron Systems
Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung