Microtek ArtixScanDI 5240 Bedienungsanleitung
www.microtek.com
Document Imaging
Scanner
ArtixScanDI 5240
ArtixScanDI 5250
ArtixScanDI 5260
User's Manual
2 ArtixScan DI 5240/5250/5260 User's Manual
Preface
Copyright
Copyright © 2016, Microtek International, Inc., all rights reserved. This document
may not be reproduced or copied in any way, stored electronically, or translated
into any language, without the permission of Microtek International, Inc.
Trademarks
Microtek, ScanMaker, ArtixScan, ScanWizard and ColoRescue are trademarks
or registered trademarks of Microtek International, Inc. All other trademarks or
registered trademarks are the property of their respective holders. Specications,
software and hardware bundles are subject to change without notice. Not
responsible for typographical errors.
Disclaimer
The contents of this manual have been checked carefully for accuracy, and every
effort has been made to ensure that there are no errors. However, Microtek
makes no guarantee as to the accuracy of the contents of this document and
reserves the right to make changes to the contents without prior warning.
I49-005047, B
June 2016
Microtek International, Inc.
No. 6, Industry East Road 3, Science Based Industrial Park, Hsinchu, 30075, Taiwan
Tel: 886-3-5772155, Fax: 886-3-5772598, http://www.microtek.com
ArtixScan DI 5240/5250/5260 User's Manual 3
FCC Compliance Statement
This equipment (Model: MRS-600A4LADF ) has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: A shielded Hi-Speed USB interface cable with ferrite core installed on the
scanner connector end must be used with this equipment.
Caution: Changes or modications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
4 ArtixScan DI 5240/5250/5260 User's Manual
Safety Precautions
Before using your scanner, read the following safety guides carefully, which
detail the proper operation of the scanner and its accessories to prevent injuries
or damage to users or equipment.
Power Source and AC Power Cord:
• Use a power source only with a power rating specied on the marking label.
• Insert the plug completely into the outlet, as a loose connection may cause
arcing and result in re.
• Place and route the power supply cord such that it is not likely to be walked
on or pinched by items placed upon or against them, paying particular
attention to the cord near the power plugs, convenience receptacles, and at
the point where it exits from the outlet.
• When the scanner is left unattended and unused for long periods of time,
unplug it from the wall outlet.
Moving and Storing the Scanner:
• Do not place the scanner on any slippery, slanted, or unstable surface. The
product may slide or fall, causing serious injury to people as well as serious
damage to the product.
• Do not use this scanner near water. Never spill liquid of any kinds on the
product, or it may result in electric shock or other hazards.
• This scanner should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including ampliers) that produce
heat.
Service:
• When you need a repair service, unplug the scanner from the power outlet
and consult qualied service personnel.
• When replacement parts are required, use replacement parts that are
specied by the manufacturer or have the same characteristics as the
original parts.
ArtixScan DI 5240/5250/5260 User's Manual 5
Table of Contents
Preface ................................................................................................2
FCC Compliance Statement ................................................................3
Safety Precautions ..............................................................................4
Knowing aboutYour Scanner...............................................................7
Features of Your Scanner................................................................... 7
Installation Requirements ................................................................... 9
Taking a Closer Look ....................................................................... 10
Front/Top View......................................................................... 10
Open View ............................................................................... 11
Back View................................................................................ 12
Initial Setup .......................................................................................13
Step 1: Unpacking Package Contents ................................................ 13
Step 2: Installing the Software.......................................................... 14
Step 3: Unlocking the Scanner.......................................................... 15
Step 4: Installing the Document Feed Tray ......................................... 16
Closing the Document Feed Tray................................................. 17
Step 5: Connecting the Scanner........................................................ 18
To the Power Adapter ............................................................... 18
To the Hi-Speed USB Cable ........................................................ 19
Positioning Documents .....................................................................20
Into the ADF (Automatic Document Feeder)........................................ 20
Using the Paper Stoppers ........................................................... 22
Document Notices..................................................................... 23
On the Flatbed................................................................................ 24
Scanning Scenarios ...........................................................................25
Using ScanWizard DI ....................................................................... 25
Scanning Documents................................................................. 25
Scanning Documents with Barcodes ............................................ 29
Scanning a Book ...................................................................... 31
Scanning Documents Automatically............................................. 34
Scanning Documents from an Application .................................... 36
6 ArtixScan DI 5240/5250/5260 User's Manual
Utilizing Scanned Documents ...........................................................37
Scanning for OCR ........................................................................... 37
Scanning for E-mail ......................................................................... 39
Scanning for Copying ...................................................................... 40
Scanning to Cloud........................................................................... 41
Scanning as Text-to-Speech (TTS) .................................................... 42
Scanner Buttons ................................................................................44
Starting up the Scanner Button Settings Interface ............................... 45
Customizing the Scanner Buttons...................................................... 46
How the Scanner Button Works ....................................................... 47
Care and Cleaning .............................................................................48
Cleaning the Scanner Glass Surfaces ................................................. 48
Cleaning the Rollers and the Separation Module Assembly.................... 50
Cleaning the Sensors ....................................................................... 51
Maintenance ......................................................................................52
Replacing the Separation Module Assembly ........................................ 52
Replacing the Feed Roller Assembly................................................... 54
Appendix ...........................................................................................57
Fixing Paper Jams ........................................................................... 57
Troubleshooting .............................................................................. 58
Specications of ArtixScan DI 5240 .................................................. 60
Specications of ArtixScan DI 5250 .................................................. 61
Specications of ArtixScan DI 5260 .................................................. 62
ArtixScan DI 5240/5250/5260 User's Manual 7
Knowing about Your Scanner
The scanner (ArtixScan DI 5240/5250/5260) is a atbed document scanner
with built-in Automatic Document Feeder (ADF) that can hold up to 75 sheets
of papers for the unattended volume scanning. It features optical resolution of
1200-dpi (atbed)/600-dpi (ADF), duplex (double-sided) scanning, and a Hi-Speed
USB interface for the fast and plug-and-play connectivity ability. As well, its
ADF can handle extra-long page documents.
Features ofYour Scanner
The scanner comes with several important features, including the following:
• Two-way design capable of fast duplex and fragile at scanning— The
scanner has a two-way design that’s capable of fast one-pass duplex batch
and easy atbed scanning, both in a single unit.
• Ultrasonic Double-feed Detection — Equipped with an ultrasonic detector,
the scanner is able to detect the thickness between overlapping pages and
to prevent multiple pages from being fed together, efciently preventing
the happens of mis-feed or double-feed when delivering papers through the
feeder.
• Energy-saving LED light source — Adopting LEDs as the light source, when
the scanner is detected by the system, there are no requirements for any
warm-up time before carrying out the scan, which boots your productivity
and reduces energy costs amazingly. With its stable performance, the image
quality will remain consistent even after used for a certain period of time.
• Chic and Easy-to-access programmable function button — The scanner is
equipped with one Select, One Scan/Stop and one Favorite buttons located
on the top of the scanner, used to automate a number of customized and
predened operations, allowing you an intuitive and easy way to access
scanner functions.
• Duplex scanning support — Allows to scan both sides of a document in
a single pass. With this feature, the scanner can handle up to 120 ipm
(ArtixScan DI 5260), 100 ipm (ArtixScan DI 5250) or 80 ipm (ArtixScan DI
5240) in color, grayscale and black & white at 200 dpi.
• Automatic Document Feeder (ADF) — The high-capacity ADF can hold up to
75 sheets of papers at a time, supporting paper sizes range from 3.149” x
3.149” (80 mm x 80 mm) to 8.5” x 65” (216 mm x 1651 mm).
8 ArtixScan DI 5240/5250/5260 User's Manual
• New and Advanced Microtek ScanWizard DI software — ScanWizard DI
offers a host of features and image adjustment controls for scanning. Its
distinctive features include:
– Book scan — With this feature, ScanWizard DI automatically arrange
scanned pages in order and thus you can easily scan a physical book
into a digital book in just simple steps.
– Text Orientation Recognition — With this feature, ScanWizard DI enables
every scanned and saved les present in a readable direction based on
a specic OCR language selected. No more fuzzy editing software is
needed.
– Paper Type — This feature allows you to specify the thickness of paper
in use, preventing the happening of paper jams while documents are fed
through the ADF.
– Smart Threshold — This feature enables the software to specify the best
level for a threshold used in high-contrast and black-and-white images
automatically, improving the clearance and readability of black-and-white
documents.
– Combine Images — This feature enables the software to merge two
separate images as one united image. With this function, you do
not need other after-scan editing program to modify your scanned
documents.
– Remove Blank Page — With this feature, blank pages are automatically
detected and removed by the software when scanning a stack of
documents. This function is quite helpful especially when users are
scanning double-sided documents and some of the pages only have text
on the front side.
– Remove Punch Hole — With this feature, the software automatically
detects the location of the punch holes on the scanned documents and
lls them in white. This function works for most common hole puncher
standards.
– Save multiple images as a single le : This advanced feature allows
user to save multiple scanned images as a single le, depending on the
number of the scanned images that are dened for document archival.
– Auto-crop and auto-deskew : The auto-crop function automatically
detects the size of the original image, crops the full scan frame to t the
image, and removes unwanted black borders. The auto-deskew function
automatically corrects distorted images for proper alignment.
– Color dropout : Red, green and blue colors can be dropped out to allow
for clearer and more accurate forms processing with problematic color
documents number of the scanned images that are dened for document
archival.
ArtixScan DI 5240/5250/5260 User's Manual 9
Installation Requirements
In order to use your scanner, your computer must satisfy the following system
requirements:
• CD-ROM/DVD-ROM drive (for installing software)
• Color display with 24-bit color output capability
• 1 GB RAM or more (2 GB is recommended)
• Intel Core2 Duo Processor at 2.1 GHz PC or higher with a SATA2/SATA3 at
7200 rpm HDD or SSD (recommended); Intel-Based Mac computer with built-
in USB port
• Windows XP, 7, 8 or 10; Mac OS X 10.6 or later
10 ArtixScan DI 5240/5250/5260 User's Manual
No. Names of Parts Functions of Parts
1 Document Feed Tray Holds the high-volume documents to be fed.
2 Release Button Opens the ADF cover.
3 ADF Cover Used to cover the inner parts of the ADF.
4 ADF (Scanner lid) Used to scan a stack of document and cover the glass
surfaces of the atbed.
5 Button Panel
• Power Button Turns the scanner on or off.
• Select Button
Toggles through the numbers of predened function buttons.
• Scan/Stop Button Starts scan immediately or cancel a ongoing scan job.
• Favorite Button Activates the function associated with the Favorite button
that was dened in the “Save Settings to Function Button”
dialog box.
• LED Display Displays the selected function button number.
6 Paper Stopper (A) Stops a stack of the output documents. It is designed to
work with the documents smaller than A4.
7 Paper Stoppers (B) Stops a stack of the output documents. It is designed to
work with the documents in A4 or Letter size.
8 Document Output Tray Stores the stacked documents which have been scanned.
9 Guide Arms Slides to hold a stack of documents.
Taking a Closer Look
Front/Top View
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Microtek Scanner Handbücher
Microtek
Microtek ScanMaker i2400 Betriebsanleitung
Microtek
Microtek ScanMaker i900 Handbuch
Microtek
Microtek ObjectScan 1600 Bedienungsanleitung
Microtek
Microtek ScanMaker V6UPL Bedienungsanleitung
Microtek
Microtek ArtixScan DI 2020 Bedienungsanleitung
Microtek
Microtek ArtixScan DI 2020 Montageanleitung
Microtek
Microtek FileScan 3125c Bedienungsanleitung
Microtek
Microtek Bio-5000 Plus Betriebsanleitung
Microtek
Microtek ArtixScan 3200XL Bedienungsanleitung
Microtek
Microtek ScanMaker i800 Plus Bedienungsanleitung
Microtek
Microtek ScanMaker 5950 Bedienungsanleitung
Microtek
Microtek ArtixScan 6000XY Bedienungsanleitung
Microtek
Microtek ScanMaker 1000XL Bedienungsanleitung
Microtek
Microtek ScanMaker i800 Plus Betriebsanleitung
Microtek
Microtek ArtixScan 2500 Bedienungsanleitung
Microtek
Microtek SCAN-IN-DEX 1000 Bedienungsanleitung
Microtek
Microtek ScanMaker i280 Bedienungsanleitung
Microtek
Microtek ScanMaker 4800 Bedienungsanleitung
Microtek
Microtek ArtixScan M2 Montageanleitung
Microtek
Microtek ScanMaker 8700 Bedienungsanleitung
