Microtek LightLid EL Bedienungsanleitung

MicrotekLightLid

SeriesProducts

InstallationandScanningGuide

1.Unpack LightLid

The LightLid is a scanner accessory that is used to

scan transparent materials with your flatbed

scanner. Before proceeding any further, check to see

that all items are in the package. If any item is

missing, contact Microtek Customer Service.

3.Remove the scanner

lid

This document provides information on how to connect the LightLid to your scanner and how to scan transparent

materials with it.

Installation

For

Windows

&Macintosh

NOTE: Before installing the LightLid, your scanner

should be installed and ready to scan.

Turn off your scanner,

then computer

4.Install LightLid

Insert the two LightLid guide pins into your scanner.

Template

LightLid

English

Deutsch

Français

Italiano

Nederlands

Español

Accessory Port

5.Connect LightLid to

your scanner

Plug the LightLid connector into the 15-pin

Accessory port on the back of your scanner.

Peel off the protective

vinyl film

Peel off the protective vinyl film from the back of

thetemplate.

Theprotective vinylfilm coversthe templateduring

shipping and prevents it from being scratched.

Whenpeelingthevinylfilmfromthetemplate,be

careful not to tear off or bend the template.

Template should fit snugly

within the scanner glass

surface and not overlap on

the vertical/horizontal rulers.

8.Press the template

against the glass

surface

Press the template all the way around against the

scanner glass bed. This ensures that the template

adheres securely to the glass.

Position the template

Place the template on the scanner glass surface. The

clear opening strip should point toward the front of

the scanner.

Clear opening strip

English

DeutschFrançais

Italiano

Nederlands

Español

Warning: To scan transparent or negative film, the

template should always stay on the scanning bed. If

the template is removed or incorrectly placed, the

scanner will not work properly. The clear opening

strip of the template is the color calibration area,

and this area must be kept clear from any

obstructing or overlapping material, such a the film

being scanned. Covering this calibration area may

adversely affect the quality of your scanned images

and also cause the scanner to malfunction.

9.Position the material

to be scanned

Place the transparent material to be scanned, face

down on the scanner glass surface, inside the

template.

Make sure the film being

scanned does not in any way

block, obstruct, or overlap the

clear opening strip of the

template.

Close-up view

English

Deutsch

Français

Italiano

Nederlands

Español

10. Scan an Image

1. Power up your scanner and then the computer.

2. Press the scanner’s “Go” button, or double-click

the ScanWizard 5 icon on the desktop to

launchScanWizard5.

3. WhenScanWizard 5launches,itautomatically

performs a fast preview of the material on your

scan bed and displays it in the preview area.

4. In the preview window, you can resize the

floating dotted line around the image by

dragging on the edge or corner of the scan

frame to determine the final size of the actual

scan. 5. To make adjustments to the image, use the tool

buttons. To scan the image, click the Scan to

button. The image is then scanned and saved to

afile. Asidefrom saving,you mayalsodeliver

the saved image to an image-editing software, an

e-mail editor, or a web browser.

To switch to the Advanced Control

Panel window

To save the scanned image

to a file, or deliver it to an

image-editing program,

an e-mail editor, or a web

browser.

To specify image settings

To exit ScanWizard 5

After launching ScanWizard 5, you may want to

change the scan material. To do this, click the

Originalbutton,selectFilm,thenPositive

FilmorNegative Film.

If you are running ScanWizard 5 in Advanced

Control Panelmode, click onthe Scan Material

icon, then select Positive Film or Negative Film.

Dieses Handbuch passt für folgende Modelle

Andere Microtek Scanner Handbücher

Microtek

Microtek Bio-1000F Bedienungsanleitung

Microtek

Microtek ScanMaker 1000XL Plus Bedienungsanleitung

Microtek

Microtek ScanMaker s380 Betriebsanleitung

Microtek

Microtek ArtixScan DI 2020 Montageanleitung

Microtek

Microtek ScanMaker X12USL Bedienungsanleitung

Microtek

Microtek LS-3800 Bedienungsanleitung

Microtek

Microtek ArtixScan DI 2015c Bedienungsanleitung

Microtek

Microtek ArtixScan 3200XL Bedienungsanleitung

Microtek

Microtek ScanMaker V6USL Bedienungsanleitung

Microtek

Microtek ObjectScan 1600 Bedienungsanleitung

Microtek

Microtek Vantas 3000 Bedienungsanleitung

Microtek

Microtek ScanMaker i4800 Bedienungsanleitung

Microtek

Microtek ScanMaker 4600 Bedienungsanleitung

Microtek

Microtek XT5820 HS Bedienungsanleitung

Microtek

Microtek ScanMaker 3630 Bedienungsanleitung

Microtek

Microtek ScanMaker 6000 Handbuch

Microtek

Microtek ScanMaker 3700 Bedienungsanleitung

Microtek

Microtek ScanMaker 5700 Bedienungsanleitung

Microtek

Microtek ScanMaker 1000XL Bedienungsanleitung

Microtek

Microtek ScanMaker 3600 Bedienungsanleitung

Microtek

Microtek ScanMaker i700 Bedienungsanleitung

Microtek

Microtek ArtixScan DI 2020 Bedienungsanleitung

Microtek

Microtek ObjectScan 1600 Bedienungsanleitung

Microtek

Microtek LightLid 35 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung