4.Must use dependent socket and reliable ground wire. Ground wire
must not connect with the null line of the gas pipe, warm gas pipe,
water pipe and must be single power
5.Never splash water on the unit directly.
6.Keep away from explosive, hazardous goods such as ether, gas,
alcohol, bonding agents, gunpowder etc.
7. Keep away from spray of inflammables such as paints, coating
materials etc.
8.After the unit is switched off, it should not be restarted within 5
minutes.
9.Do not leave the power cord under any heavy objects including the
unit itself.
10.Do not drill holes or install other objects on the casing.
11.This cooler is not suitable for storage pharmaceutical products.
4. Portage and storage
1.Keep the unit vertical when carrying the unit, the angle to the
horizontal line should not be
over 50 °，otherwise it will damage the compressor and affect
normal operation of the unit.
2.The unit should be place on a solid and firm ground, take away the
bottom pack to lower
the shock and noise.
3.Leave at least 20 cm of distance between the back of the unit and the
wall for ventilation and leave a space with an open angle of 160 ° for
the door.
4.Keep the unit away from heat sources and avoiding direct sunlight.
5.Never place the unit on a location where water can reach or with high
moisture. Splashed water and dirt should be wiped off in time by
using a soft cloth.
