MiLAN MIL-S500 Bedienungsanleitung

MIL-S500 User’s Guide

5-Port 10/100 Switch

All trademarks are the properties of their respective owners. No portion of this document

may be reproduced, altered, adapted or translated without the prior written approval.

DOCUMENT WARRANTY

The information in this document is subject to change without notice. We make no

warranty of any kind regarding this material, including, but not limited to, the implied

warranties or merchantability and fitness for a particular purpose. Furthermore, we shall

not be liable for errors contained herein or for incidental or consequential damage in

connection with the furnishing, performance, or use of this material.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class A and B

computing device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in commercial or residential

environments.

This equipment generates and radiates radio frequency energy and, if not installed and used

in accordance with instructions, may cause harmful interference to radio communications.

In which case, the user will be requires to correct the interference at the user’s own

expense.

Five-year Limited Warranty

MiLAN Technology warrants to the original consumer or purchaser that each of its

products and all components thereof, will be free from defects in material and/or

workmanship for a period of five years from the original factory shipment date. Any

warranty hereunder is extended to the original consumer or purchaser and is not assignable.

MiLAN Technology makes no express or implied warranties including, but not limited to,

any implied warranty of merchantability or fitness for a particular purpose, except as

expressly set forth in this warranty. In no event shall MiLAN Technology be liable for

incidental or consequential damages, costs, or expenses arising out of or in connection with

the performance of the product delivered hereunder. MiLAN Technology will in no case

cover damages arising out of the product being used in a negligent fashion or manner.

Trademarks

registered trademarks of MiLAN . In the United States and/or other countries. All other

Trademarks are the property of their respective holders.

To Contact MiLAN Technology

For prompt response when calling for service information, have the following information

ready:

Product serial number and revision. Date of purchase and Vendor or place of purchase.

You can reach MiLAN Technology

technical support at: E-mail:

[email protected]

Telephone: +1.408.744.2751

Fax: +1.408.744.2771

http://www.milan.com

[email protected]T

MiLAN Technology

1329 Moffett Park Dr

Sunnyvale, CA 94089-1138

United States of America

Telephone: +1.408.744.2775

Fax: +1.408.744.2793

P/N 90000200 Rev C



MIL-S500 Switch

User’s Guide

Introduction

The MIL-S500 Switch provides wire-speed, Fast Ethernet switching function

that allows high-performance, low cost connections to full-duplex, half-duplex,

10Mbps and 100Mbps Ethernet network. The MIL-S500 switch provides five

auto-sensing 10/100Mbps RJ-45 ports that automatically detects the speed of

the device that is plugged into it. This switching function allows 10Mbps,

100Mbps, full-duplex and half-duplex devices to communicate on the same

network without having to replace any infrastructure.

Key Features

Compliant with IEEE 802.3 & 802.3u standards

Auto-negotiation for 10/100Mbps transmission

Store-and-Forward switching architecture

 Auto-detect of full/half-duplex mode in all ports

 Back-pressure for Half-duplex , Pause frame for Full-duplex

 Plug-and-Play configuration auto addresses learning

 Embedded 1K-entry MAC address table and 1Mega Byte frame buffer

 LED-indicators for power, speed 100Mbps, link/activity

 Space-saving compact size

 Broadcast Storm protection

 MDI/MDIX Auto-recognition (No cross over cable required)

 Magnets provide easy installation in modular office

Package Contents

Your package contents should include the following:

 MIL-S500 Switch

 Four rubber feet with adhesive pads

 Two Magnets

 User’s Guide

Figure 2. Package Content

If any of these pieces are found missing or damaged, please contact your

local dealer or reseller for replacement.

Hardware Description

The Front Panel

The front panel consists of LED Indicators.

Figure 3. Front view of MIL-S500 Switch

LEDs

Per Device Power

100Mbps ( Link on 100Mbps )

Per Port LINK/ACT ( Link/Activity )

The Rear Panel

The rear panel of the MIL-S500 Switch has a DC power connector and 5

auto-sensing ports.

Figure 4. Rear panel view of the MIL-S500 switch

Auto-sensing ports for speed and Duplex

Five Auto-sensing RJ-45 ports for 10Base-Tor 100Base-TX connections.

DC Power Connector

Plug this connector female end into this device, and the male into a power

outlet. Supported input voltages 9 VDC at 700 mA.

Auto-sensing for MDI/MDIX

No need for crossover

LED-Indicators 5

Figure 5.Front panel view of LED indications

The Table lists the LEDs available and their respective function.

LED Status Color Description

Power On Green The hub is supplied with suitable power.

On Green The port is connecting with 100Mbps.

100Mbps Off

The connection between the hub and the device is

10Mbps, if the LINK/ACT light is on.

On Green

The port is successfully connecting with the

device.

Blinking The port is receiving or transmitting data.

LINK/ACT

Off The port does not link successfully with the device.

Installation

Apply self-adherent rubber feet to the bottom of the Switch near each ofthe four corners.

See Figure 6. 6

If applying Switch to metal surface, install magnets as shown in Figure 6. Switch may

then be installed on a metal surface.

Plug in power adapter.

Trouble Shooting

The Switch can be easily monitored through panel indicators that assist in the

identification of problems. This section describes common problems you may

encounter and where you can find possible solutions.

Power

If the power indicator does not turn on when the power cord is plugged in, you

may have a problem with the power outlet, or power cord. However, if it

powers off after running for a while, check for loose power connections, power

losses or surges at the power outlet. Or, you may try to unplug the power cord

on the Switch, wait for five seconds and then reconnect. If you still cannot

resolve the problem, call our technical support hotline.

Cabling

Verify that the cabling type is correct. Be sure all cable connectors are securely seated

in the required ports. Use all standard unshielded twisted-pair (UTP), Category 3, 4, or

5 cables or Category 5 only when connecting with Fast Ethernet. Make sure the

maximum distance between the Switch to the workstation, or Switch is 100 meters.

Product Specification

General Specification

Standard Compliance IEEE 802.3 10Base-T Ethernet

IEEE 802.3u & 802.3x 100Base-TX Fast Ethernet

Number of Ports 5X 10/100Mbps Auto-sensing RJ-45 ports

Data Transfer Rate

Ethernet: 10Mbps(half duplex)

20Mbps(full duplex)

Fast Ethernet: 100Mbps(half duplex)

200Mbps(full duplex)

Network Cables Unshielded twisted-pair cable

Topology Star

LED Indicators

Per Device Power

Per Port 100Mbps, LINK/ACT

Performance Specification

Transmission Method Store and forward

MAC address table 1K-entry MAC address table

Maximum Forwarding

Rate(64byte packets) 14,880 pps /10 BASE-T

148,800 pps /100BASE-TX

Maximum Filtering

Rate(64byte packets) 14,880 pps /10BASE-T

148,800 pps/100BASE-TX

Flow control Pause frame (Full-duplex)

Back-pressure (Half-duplex)

Duplex mode Supports both half-duplex and full-duplex mode

Physical & Environmental Specification

Power Supply External power adapter,

DC 9V, 700mA

Dimensions 111mm×70mm×20mm (L×W×H)

Temperature

Operating temperature:

0 to 45 (32 to 113)

storage temperature:

40 to 70 (-22 to 140)

Humidity 10% to 90% (non-conditioning)

EMI FCC Class B, CE mark

Safety UL, cUL

Inhaltsverzeichnis

Andere MiLAN Schalten Handbücher

MiLAN

MiLAN MIL-S16002TG Series Bedienungsanleitung

MiLAN

MiLAN MIL-S3570 Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M-STK Bedienungsanleitung

MiLAN

MiLAN MIL-SM801P Bedienungsanleitung

MiLAN

MiLAN MIL-S2612 Bedienungsanleitung

MiLAN

MiLAN MIL-SM4804G Bedienungsanleitung

MiLAN

MiLAN MIL-S8000T Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401MAF Bedienungsanleitung

MiLAN

MiLAN MIL-S501MT-15 Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

MiLAN

MiLAN MIL-H1120 Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401MAF Bedienungsanleitung

MiLAN

MiLAN MIL-S8000G Bedienungsanleitung

MiLAN

MiLAN mil-s2400s Bedienungsanleitung

MiLAN

MiLAN MIL-SME801P Bedienungsanleitung

MiLAN

MiLAN TR-TP-HB-1600 Bedienungsanleitung

MiLAN

MiLAN MicroHub LE MIL-4000H Bedienungsanleitung

MiLAN

MiLAN MIL-S3580 Bedienungsanleitung

MiLAN

MiLAN MIL-SM24004TG Bedienungsanleitung

MiLAN

MiLAN MIL-SM4004TG Bedienungsanleitung

MiLAN

MiLAN MIL-S16000T Bedienungsanleitung

MiLAN

MiLAN MIL-S24002TGXX Bedienungsanleitung

MiLAN

MiLAN MIL-SM802GAF Bedienungsanleitung

MiLAN

MiLAN MIL-S801XX Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung