Milwaukee MW14 Bedienungsanleitung

WARRANTY:

This instrument is warranted from all defects in materials and manufacturing for

a period of two years from the date of purchase.

If during this period, the repair or replacement of parts is required, where the

damage is not due to negligence or erroneous operation by the user, please return

the parts to either dealer or our ofce and the repair will be effected free of charge.

Note: We reserve the right to modify the design, construction and appearance

of our products without advance notice.

SPECIFICATIONS:

MW 14

RANGE 0.00 to 5.00 ppm

RESOLUTION 0.01 ppm

ACCURACY ±0.04 ppm ±2% of reading @ 25 °C

TYPICAL EMC DEV. ± 0.01 ppm

LIGHT SOURCE Light Emitting Diode @ 525 nm

LIGHT DETECTOR Silicon Photocell

METHOD Adaptation of the EPA Phenantroline method

315B, for natural and treated waters. The re-

action between iron and reagent causes an

orange tint in the sample.

ENVIRONMENT 0 to 50°C (32 to 122 °F)

max. 95% RH non-condensing

BATTERY TYPE 1 x 1.5V AAA

AUTO-SHUT OFF After 3 minutes of non-use and 2

minutes after reading.

DIMENSIONS 81.5 x 61 x 37,5 mm (3.2 x 2.4 x 1.5 “)

WEIGHT 64 g (2,25 oz.)

OPTIONAL ACCESSORIES:

Reagent Sets

2720416 Iron powder reagent, 25 pcs.

Other Accessories

3000100 Glass cuvettes with caps (2 pcs)

3000200 Tissue fow wiping cuvettes (2 pcs)

3000300 1.5V AAA batteries (4 pcs)

USER MANUAL

IRON: HIGH RANGE

MODEL: MW14

PRELIMINARY EXAMINATION:

Please examine this product carefully. Make sure that

the instrument is not damaged. If any damage oc-

cured during shipment, please notify your Dealer.

Each MW 12 meter is supplied complete with:

• Two Sample Cuvettes and Caps

• Six powder reagents for Iron High Range

• 1 x 1,5V AAA Battery

• Instruction Manual

FUNCTIONAL DESCRIPTION:

1. Dust cover

2. Cuvette with cap

3. Cuvette holder

4. Liquid Crystal Display

5. Button

BATTERY REPLACEMENT:

To save the battery, the instrument shuts down after 3 minutes of non-

use and 2 minutes after reading. One fresh battery lasts for a mini-

mum of 5000 measurements, depending on the light level. When the

battery capacity is under 10 % “bAt” appears on the LCD at start-up.

If the battery is empty and accurate measurements can’t be taken any

more, the instrument shows “bAd” then “bAt” each for 1 second and

turns off. To restart the instrument, the battery must be replaced with

a fresh one.

To replace the instrument’s battery, follow the steps:

Turn the instrument off by holding the button until the meter shuts off.

OPERATION:

Turn the meter on by pressing the

button. After all the segments are

displayed, “C.1”, “Add” appears with

“Press” blinking, the meter is ready.

Fill the cuvette with 10 mL of unre-

acted sample and replace the cap.

Place the cuvette into the meter and

close the meter’s cap.

Press the button. When the display

shows “Add”, ”C.2” with “Press”

blinking the meter is zeroed.

Remove the cuvette, open it and add

the content of one packet of 2720416

reagent. Replace the cap and shake

gently for 2 minutes until the powder

is completely dissolved. Replace the

cuvette into the meter.

Wait for 3 minutes and then press the

button or press and hold the button

until the timer is displayed on the LCD.

The instrument directly displays the

concentration of iron in ppm. The me-

ter automatically turns off after 2 min-

utes.

•

Turn the instrument upside down

and remove the battery cover with

a screwdriver.

Remove the battery from its lo-

cation and replace it with a fresh

one.

Insert the battery cover and re-

place the screw with a screw-

driver.

•

Andere Milwaukee Messgerät Handbücher

Milwaukee

Milwaukee CALIBRATION 2238-20 Betriebsanleitung

Milwaukee

Milwaukee 3421 Bedienungsanleitung

Milwaukee

Milwaukee 2309-60 Bedienungsanleitung

Milwaukee

Milwaukee MC310 Bedienungsanleitung

Milwaukee

Milwaukee MW 14 Bedienungsanleitung

Milwaukee

Milwaukee Smart Monitoring System SMS110 Bedienungsanleitung

Milwaukee

Milwaukee SM700 Bedienungsanleitung

Milwaukee

Milwaukee 2205-20 Bedienungsanleitung

Milwaukee

Milwaukee LRD100 Bedienungsanleitung

Milwaukee

Milwaukee MI405 Bedienungsanleitung

Milwaukee

Milwaukee LDM 80 Bedienungsanleitung

Milwaukee

Milwaukee LDM 30 Bedienungsanleitung

Milwaukee

Milwaukee Heavy Duty 2270-20 Bedienungsanleitung

Milwaukee

Milwaukee MI404 Bedienungsanleitung

Milwaukee

Milwaukee MW803 Bedienungsanleitung

Milwaukee

Milwaukee EC40 Bedienungsanleitung

Milwaukee

Milwaukee MW101 Bedienungsanleitung

Milwaukee

Milwaukee HEAVY DUTY M12 PL Bedienungsanleitung

Milwaukee

Milwaukee REDLITHIUM Bedienungsanleitung

Milwaukee

Milwaukee MW102 Bedienungsanleitung

Milwaukee

Milwaukee MC310 Bedienungsanleitung

Milwaukee

Milwaukee M12 3PL Bedienungsanleitung

Milwaukee

Milwaukee M12 CLLP Bedienungsanleitung

Milwaukee

Milwaukee MI805 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung