MIMAKI TS500 Bedienungsanleitung

Make sure to wear the attached

goggles and glove when you work.

TS500/Tx500 Daily Care

With a view to using this machine in a better condition, please be sure to the following daily care after at the end of the

daily work. Please refer to “Daily care manual” for the detail.

Cleaning of around the heads

Perform [HEAD MAINT.], move the carriage to the

maintenance position and open the left maintenance cover.

(1) Press the key in LOCAL.

(2) Press the key.

(3) Press to select [HEAD MAINT.].

(4) Press the key.

(5) Open the left maintenance cover.

2. Soak the clean stick or the waste cloth in the maintenance cleaning liquid and wipe off an

accumulated ink on the side of the head and on the bottom surface of the slider.

3. Soak the COTTON CIEGAL®in the maintenance cleaning liquid and wipe off the mark of

the cap rubber attached on the nozzle surface from the rear side to the front side.

4. Close the left maintenance cover.

5. Press , complete the cleaning.

Left maintenance

cover

MAINT.

ฌЭ

Side surface of the head (shown in deep gray)

Nozzle part Bottom surface of the slider (shown in gray)

[Before cleaning] [After cleaning]

• Do not touch the nozzle surface, because the cleaning will be performed in the procedure

No.3.

[Before cleaning] [After cleaning]

COTTON CIEGAL®

Mark of the cap

• Immerse much enough so that maintenance liquid may drip from it.

• Do not wipe the nozzle surface with dry COTTON CIEGAL®.

• If COTTON CIEGAL®has fluffed, replace it.

• If ink solid adheres to COTTON CIEGAL®, change the surface to use for cleaning or

replace it.

Cleaning of the station

Perform [STATION MAINT.], move the carriage to the

maintenance position and open the left maintenance cover.

(1) Press the key in LOCAL.

(2) Press the key.

(3) Press to select [STATION MAINT.].

(4) Press the key.

(5) Open the left maintenance cover.

Cleaning of the cap

Wipe off the ink of the cap rubber and cap cover with clean stick or waste cloth dipped in cleaning solution for

maintenance.

Cleaning of the wiper

Wipe off the ink of the wiper and bracket with clean stick or waste cloth dipped in cleaning solution for

maintenance.

Cleaning of the wiper blade

Wipe off the ink of the wiper blade with clean stick or waste cloth dipped in cleaning solution for maintenance.

2. Close the right maintenance cover.

3. Press , complete the cleaning.

Right maintenance

cover

MAINT.

[Before cleaning] [After cleaning]

Cap rubber

• After cleaning, make sure

that the cap rubber and mesh

in the cap are not removed.

Cap cover

Bracket

Wiper

[Before cleaning] [After cleaning]

• After cleaning, make sure the edge of the wiper is horizontal.

[Before cleaning] [After cleaning]

Wiper blade

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MIMAKI Plotter Handbücher

MIMAKI

MIMAKI CG-60SL Bedienungsanleitung

MIMAKI

MIMAKI CG-75FXII Bedienungsanleitung

MIMAKI

MIMAKI CG-60SRIII Bedienungsanleitung

MIMAKI

MIMAKI CG-60EX Bedienungsanleitung

MIMAKI

MIMAKI CJV150 series Bedienungsanleitung

MIMAKI

MIMAKI CFL-605RT Montageanleitung

MIMAKI

MIMAKI APC-130 Bedienungsanleitung

MIMAKI

MIMAKI CG-60st Bedienungsanleitung

MIMAKI

MIMAKI CG-AR Bedienungsanleitung

MIMAKI

MIMAKI TextileJet Tx2-1600 Series Bedienungsanleitung

MIMAKI

MIMAKI JFX200-2513EX Wartungshandbuch

MIMAKI

MIMAKI JV3 Series Bedienungsanleitung

MIMAKI

MIMAKI CG-AR Series Wartungshandbuch

MIMAKI

MIMAKI TPC-1000 Bedienungsanleitung

MIMAKI

MIMAKI TEXTILE JET TX400 Bedienungsanleitung

MIMAKI

MIMAKI CG-60AR Montageanleitung

MIMAKI

MIMAKI CFL-605RT Bedienungsanleitung

MIMAKI

MIMAKI GP-604D Bedienungsanleitung

MIMAKI

MIMAKI JV3-75SPII Bedienungsanleitung

MIMAKI

MIMAKI DS-1600 Bedienungsanleitung

MIMAKI

MIMAKI CF-0912 Bedienungsanleitung

MIMAKI

MIMAKI JV4 Series Bedienungsanleitung

MIMAKI

MIMAKI CG-AR Series Technisches Handbuch

MIMAKI

MIMAKI TPC-1000 Montageanleitung

Beliebte Plotter Handbücher anderer Marken

MUTOH

MUTOH Kona 760 Bedienungsanleitung

HP 7475a Bedienungsanleitung

Vulcan-Hart

Vulcan-Hart FC-500VC Bedienungsanleitung

Roland

Roland TrueVIS VG-640 Betriebsanleitung

Furuno

Furuno RP-180 Bedienungsanleitung

Roland

Roland VersaCamm SP-540V Bedienungsanleitung

Ioline

Ioline Summit Bedienungsanleitung

Summa

Summa S CLASS Bedienungsanleitung

Gerber Technology

Gerber Technology GERBERplotter MP Series Bedienungsanleitung

Furuno

Furuno RP-17 Bedienungsanleitung

HP 7470A Bedienungsanleitung

SII

SII LP-1010 Bedienungsanleitung

Great Computer

Great Computer JII-61 Bedienungsanleitung

Roland

Roland VersaUv LEF - 12i Bedienungsanleitung

Lectra

Lectra Alys 120 Bedienungsanleitung

MUTOH

MUTOH Ultima SC-850D Bedienungsanleitung

Skycut

Skycut D Series Bedienungsanleitung

Commodore

Commodore 1520 Bedienungsanleitung