Mindeo MP83 Series Bedienungsanleitung

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MP83xx_QG_EN_V1.1.

MP83xx Image Platform Quick Guide

Notice

Parts of the scanner

① Exit window

② Camera push button

③ LED

④ Beeper push button

⑤ Beeper

⑥ Hanging holes

⑦ USB interface

⑧Auxiliary interface for

handheld scanner, etc

⑨ Host interface

Returning default parameters and listing version information

Default value initialization

Firmware version list

Scan mode (Alternative)

Timeout off (Default)

Good-read off

Installing the cable

1. Switch off the host system.

2. Refer to the below pictures, connect the host with the image platform based on different

cables.

3. Ensure that all connections are secure.

4. Switch on the host system. If the installation is successful, the beeper will beep and LED

will light.

PS2 cable

RS232 cable

USB cable

Programming instruction and example

Two programming modes have been provided as bellows:

Single-scan setting

Scan the appropriate barcode on

the right.

Example: to set Flow control to be XON/XOFF.

Multiple-scan setting

Scan “Option bar code”

Scan “The 1st character of option”

Scan “The 2nd character of option”

Scan “END”

Example: to set Flow control to be XON/XOFF.



A standard packing includes an image platform, a 5V adaptor, a USB cable and a

CD (or a user manual).



Accessories include a stand, a RS232 cable and a PS2 cable.



Use a piece of dry and soft cloth when cleaning the image platform is in need.

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MP83xx_QG_EN_V1.1.

Reading techniques

1. Move the barcode to close to the image platform.

2. In general, the reading range of the image platform is limited to 2-8cm regardless of the

size of the minimal element of the barcode.

3. On a successful reading, the beeper will beep and the LED will light. If no barcode closes

to the image platform in a moment, the image platform will go to sleep.

Field of view

Figure 1 Field of view

Figure 2 Field of view –Front view

Assembling the stand

Figure 3

Figure 4

Figure 5

Figure 6

1. As shown in Figure 3, plug in two connection-arms to the two associated notches on the

bottom of the image platform.

2. As shown in Figure 4, well connect the image platform with the stand by tightening the

single screw.

3. As shown in Figure 5, adjust the image platform forward/backward for a desired position.

4. As shown in Figure 6, if you want to fix the stand on a table or other platform, you can

remove two plastic stopper on the stand (see ①), then fix the stand with a table with

appropriate screws.

Andere Mindeo Barcode-Lesegerät Handbücher

Mindeo

Mindeo MD61 Series Bedienungsanleitung

Mindeo

Mindeo MS3390 Bedienungsanleitung

Mindeo

Mindeo MP80 Series Bedienungsanleitung

Mindeo

Mindeo MP8200 Bedienungsanleitung

Mindeo

Mindeo MD52 Series Bedienungsanleitung

Mindeo

Mindeo MD6100S Bedienungsanleitung

Mindeo

Mindeo MS3590 Bedienungsanleitung

Mindeo

Mindeo MD60 Series Bedienungsanleitung

Mindeo

Mindeo CS3290 Bedienungsanleitung

Mindeo

Mindeo MD6600 Bedienungsanleitung

Mindeo

Mindeo MP82 Series Bedienungsanleitung

Mindeo

Mindeo FM100 Bedienungsanleitung

Mindeo

Mindeo MD22 Series Bedienungsanleitung

Mindeo

Mindeo ES168 Bedienungsanleitung

Mindeo

Mindeo CS2190 Bedienungsanleitung

Mindeo

Mindeo CS3290 Bedienungsanleitung

Mindeo

Mindeo CS2290 Bedienungsanleitung

Mindeo

Mindeo MD6000 Bedienungsanleitung

Mindeo

Mindeo MS3390 Bedienungsanleitung

Mindeo

Mindeo CS3290-2D Bedienungsanleitung

Mindeo

Mindeo MP168 Bedienungsanleitung

Mindeo

Mindeo ES4200 Bedienungsanleitung

Mindeo

Mindeo MD6000 Bedienungsanleitung

Mindeo

Mindeo MP758 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung

AZENTA

AZENTA 281947 Bedienungsanleitung