Mindeo MP720 Bedienungsanleitung

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MP720_QG_EN_V1.2.

MP720 Presentation Imager Quick Guide

Note

Parts of the imager

Installing the cable

1. Switch off the host;

2. Refer to the below pictures, connect the host with the imager based on different cables;

3. Ensure that all connections are secure.

4. Switch on the host system. If the installation is successful, the beeper will beep and LED

will light.

RS232 cable

USB cable

Return default parameters and version information

Default value initialization

Firmware version list

Note: If the host cannot receive data normally because the input speed of the imager is too

fast, please scan the barcode below:

Programming instruction and example

Two programming modes have been provided as bellows:

Single-scan setting

Scan the appropriate

Single-scan setting

Example: to set Flow control to be XON/XOFF.

Multiple-scan setting

Scan “Option bar code”

Scan “The 1st character of option”

Scan “The 2nd character of option”

Scan “END”

Example: to set Flow control to be XON/XOFF.



A standard packing includes an imager, a USB cable and a CD (or a user manual).



Accessories include a RS232 cable, a 5V adaptor.



Use a piece of dry and soft cloth when cleaning the imager is in need.

Scan window

Beeper

Trigger

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MP720_QG_EN_V1.2.

Reading techniques

1. Press and hold the trigger, the imager projects a green LED square which allows

positioning the barcode within its field of view, and turns on the red LED for illumination.

2. When reading a barcode, the green LED square will be smaller when the imager is closer

to the barcode and larger when it is farther from the barcode. Please hold the imager at an

appropriate distance from the barcode, and center the green LED square on the barcode.

3. On a successful barcode reading, the imager will beep once, and the green LED square

and red LED will be turned off. Then the imager transmits barcode message to the host.

Scanning mode

Note: The factory default settings are indicated with asterisks (*).

Good-read off

Continue

Good-read on*

Volume of beeper

Low

Middle

High*

Enable illumination in low light conditions

Disable*

Enable

Andere Mindeo Laborausrüstung Handbücher

Mindeo

Mindeo MP725 Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung