Mindray BeneView T1 Bedienungsanleitung

Quick Reference Guide

PATIENT MONITOR

Note: The T1 Quick Reference Guide is not intended

as a replacement to the Operating Instructions. Prior

to operating equipment, the user must be familiar

with the Operating Instructions Manual contents. This

document is a guideline only to be used as an aid to

comprehensive Inservice Training.

Patient Setup.....................................................1

Admit Patient and Enter Demographics(Manual Entry) ...........1

Enter Demographics (Hospital Information System Interface) ....1

Adjust Patient Size ..............................................2

Discharge a Patient ............................................. 2

Standby ..........................................................3

Enter Standby ..................................................3

Resume Monitoring.............................................3

Print..............................................................4

Realtime Waveforms ............................................4

Adjust Printed Waveforms....................................... 4

ECG ..............................................................4

Adjust ECG Lead ................................................4

Enable Pacemaker Detection And Set Pacemaker Rate ...........5

Initiate ECG Relearn............................................. 6

Initiate ST Analysis ..............................................6

NIBP..............................................................6

Factors that Affect Blood Pressure Measurement Accuracy ............6

Initiate a Non-Invasive Blood Pressure Measurement (NIBP) ......8

Set a Non-Invasive Blood Pressure Measurement Interval ........9

Invasive Blood Pressures .........................................9

Adjust Invasive Blood Pressure Label ............................9

Zero Invasive Blood Pressure ...................................10

Alarms ..........................................................10

Adjust Alarm Limits ............................................10

Adjust Alarm Responses .......................................11

Adjust Arrhythmia Alarms......................................12

Disable Non-Lethal Arrhythmias................................12

Table of Contents

Reset Alarms ....................................................13

Pause All Alarms ................................................13

Screen Display ..................................................13

History ..........................................................14

Tabular Trends .................................................14

Arrhythmia and Alarm Events ..................................15

Full Disclosure .................................................15

Volumes.........................................................16

Alarm Volume .................................................16

Key Volume....................................................16

Beat Tone......................................................16

Alternate Operating Modes .....................................17

Night Mode ...................................................17

Privacy Mode ..................................................17

Date And Time ..................................................18

Parameter Colors................................................18

Load Default(Preset) Settings ...................................19

Lock/Unlock Touchscreen Display ...............................19

Cleaning/Disinfecting ............................................. 20

Cleaning the Main Unit/module/Handle/Docking Station ...............20

Disinfecting the Main Unit/module/Handle/Docking Station............22

Cleaning and Disinfecting the Accessories..............................22

Sterilization ....................................................... 22

Table of Contents (cont'd)

T1 Quick Reference Guide

PATIENT SETUP

Admit Patient and Enter Demographics (Manual Entry)

The Patient Setup menu allows the clinician to admit a patient and enter

patient demographics. Admitting also restores default (preconfigured) settings

and clears previous patient’s information.

To enter demographics on the T1 monitor:

a. Scroll and select Patient Setup >> from Main Menu (quick key)

b. Select Admit Patient

c. Select Ok to enter Patient Demographics

d. Select white edit box to open field and enter patient information

e. Enter patient’s information using onscreen keyboard

f. Select to accept the information

g. Select Ok to return to main display

DPM Central Station Interface: Entering demographic information on

the DPM Central Station automatically enters it at the T1 bedside monitor.

Entering demographic information on the T1 bedside monitor automatically

enters it on the DPM Central Station. Admit button selection is required for

patient information to be displayed or stored on the DPM Central Station.

Panorama Central Station Interface: Entering demographic information

on the Panorama Central Station or WorkStation automatically enters it

on the T1 bedside monitor. Entering demographic information on the T1

bedside monitor automatically enters it on the Panorama Central Station and

WorkStation. Admit button selection is not required for patient information

to be displayed or stored on the Panorama Central Station.

Enter Demographics (Hospital Information System Interface)*

The Patient Setup menu allows the clinician to enter patient demographics

from the Hospital Information System.

To enter demographics from the Hospital Information System on the T1

bedside monitor:

a. Scroll and select Patient Setup >> from Main Menu (quick key)

b. Select Patient Demographics

T1 Quick Reference Guide

c. Select Obtain Patient Info.>>

d. Select Department and enter hospital department

e. Select patient demographic field (Last Name and/or First Name and/or

MRN)

f. Enter patient’s information using onscreen keyboard

g. Select Query

h. Select patient and select Import

i. Select Ok to return to main display

*Optional Installation Required

Adjust Patient Size

The Patient Setup menu allows the clinician to adjust patient size. To adjust

patient size on the T1 monitor:

a. Scroll and select Patient Setup >> from Main Menu (quick key)

b. Select Patient Demographics

c. Select Patient Cat.

d. Select current size and adjust to Adu (adult), Ped (pediatric), or Neo

(Neonate)

e. Select Ok to return to main display

Note: Adjusting patient size restores the monitor to the default

(preconfigured) settings but does not clear patient information or data.

DPM Central Station: Patient size can be changed on the DPM Central Station.

Panorama Central Station: Patient size cannot be changed on the Panorama

Central Station.

Discharge a Patient

The Discharge function clears all patient information and restores default

(preconfigured) settings.

To Discharge a patient on the T1 monitor:

a. Scroll and select Patient Setup >> from Main Menu (quick key)

b. Select Discharge Patient

c. Select Ok to confirm

Note: After the patient is discharged, default (preconfigured) settings are

T1 Quick Reference Guide

restored, and the monitor is placed into Standby.

DPM Central Station Interface: Discharging a patient on the T1 bedside

monitor will automatically discharge the patient on DPM Central Station.

Discharging the patient on the DPM Central Station will discharge the patient

on the T1 bedside monitor.

Panorama Central Station Interface: Discharging a patient on the T1 bedside

monitor will automatically discharge the patient on the Panorama Central

Station, WorkStation, and ViewStation. Discharging the patient on the Panorama

Central Station will automatically discharge the patient on the WorkStation,

ViewStation, and T1 bedside monitor (optional, controlled by the Panorama).

STANDBY

Enter Standby

The Standby function allows the clinician to suspend monitoring on a patient.

While in standby, the patient is not monitored; however, all data and settings

are preserved.

To place a patient into Standby on the T1 monitor:

a. Select Standby from the Main Menu (quick key)

b. Select Yes to confirm

Resume Monitoring

To remove a patient from Standby and resume monitoring on the T1 monitor

move the Lock/Unlock key to the right to resume monitoring.

DPM Central Station Interface: Selecting Standby on the T1 bedside monitor

automatically places the DPM Central Station in standby.

Panorama Central Station Interface: Selecting Standby on the T1 bedside

monitor automatically places the Panorama Central Station, WorkStation,

and ViewStation in standby. Selecting Bedside and Panorama Standby on

the Panorama Central Station or WorkStation automatically places the T1

bedside monitor and ViewStation in standby. On the T1 monitor, move the

Lock/Unlock key to the right to remove patient from Standby and resume

monitoring as a patient cannot be removed from Standby on the Panorama

Central Station.

T1 Quick Reference Guide

Realtime Waveforms (Laser printer connection required)

To print a real time report for a patient on the T1 monitor:

a. Scroll and select Print Setup >> from Main Menu (quick key)

b. Select Realtime Reports >>

c. Select Normal Report tab

d. Select Print

e. Select Main Menu (quick key) or to return to the main display

Adjust Printed Waveforms

To adjust the waveforms printed for a patient on the T1 monitor:

a. Scroll and select Print Setup >> from Main Menu (quick key)

b. Select Realtime Reports >>

c. Select Normal Report tab

d. Select Select Wave >>

e. A in the waveform box indicates waveform is selected

f. Select to return to Normal Report and select Print

g. Select Main Menu (quick key) or to return to the main display

DPM Central Station Interface: Selecting Print in the Realtime Report menu

on the T1 bedside monitor will print a 10-second, Realtime Report on the DPM

Central Station. The waveforms printed are determined by the T1 bedside

monitor.

Panorama Central Station Interface: Selecting Print in the Realtime Report

menu on the T1 bedside monitor will print a 10-second, All Strips Report on

the Panorama Central Station. The waveforms printed are determined by the

Print Setup tab on the Panorama Central Station. Waveform print selection on

the Panorama Central Station, WorkStation, and ViewStation are independent.

ECG

Adjust ECG Lead

The T1 allows the clinician to adjust the leads being viewed on the main

display. To adjust the ECG Lead on the T1 monitor:

T1 Quick Reference Guide

a. Select ECG waveform or ECG numeric tile to enter the ECG Setup menu

a. Select ECG Setup >> from Parameters >> in Main Menu (quick key)

to enter the ECG Setup menu

b. Select Others >>

c. Select Lead Set to select a lead set from the drop down list

d. Select ECG to adjust lead (3 lead) or select ECG1 to adjust the first lead

and ECG2 to adjust the second lead (5 lead)

e. Scroll and select lead from the drop down menu

f. Select Main Menu (quick key) or to return to the main display

DPM Central Station Interface: Adjusting ECG leads on the T1 bedside

monitor and DPM Central Station are independent.

Panorama Central Station Interface: Adjusting ECG leads on the T1 bedside

monitor, Panorama Central Station, WorkStation, and ViewStation are

independent.

Enable Pacemaker Detection and Set Pacemaker Rate

The T1 allows the clinician to enable pacemaker detection. The symbol is

displayed when the pacemaker detection is enabled.

To enable the pacemaker detection on the T1 monitor:

a. Select ECG waveform or ECG numeric tile to enter the ECG Setup menu

a. Select ECG Setup >> from Parameters >> in Main Menu (quick key)

to enter the ECG Setup menu

b. Scroll and select Others >>

c. Select Paced to Yes

d. Scroll and select Pacemaker Rate

e. Adjust Pacemaker Rate using the up and down arrows

f. Select Main Menu (quick key) or to return to the main display

DPM Central Station Interface: Pacemaker enhancement on the T1 bedside

monitor and DPM Central Station are independent.

T1 Quick Reference Guide

Panorama Central Station Interface: Pacemaker enhancement on the T1

bedside monitor, Panorama Central Station, WorkStation, and ViewStation are

independent.

Initiate ECG Relearn (Arrhythmia Option Required)

To initiate ECG relearning manually on the T1 monitor:

a. Select ECG waveform or ECG numeric tile to enter the ECG Setup menu

a. Select ECG Setup >> from Parameters >> in Main Menu (quick key)

to enter the ECG Setup menu

b. Scroll and select Relearn

c. Select Main Menu (quick key) or to return to the main display

Initiate ST Analysis (ST Option Required)

To initiate ST analysis on the T1 monitor:

a. Select ECG waveform or ECG numeric tile to enter the ECG Setup menu

a. Select ECG Setup >> from Parameters >> in Main Menu (quick key)

to enter the ECG Setup menu

b. Scroll and select ST Analysis >>

c. Select ON for ST analysis

d. Select Main Menu (quick key) or to return to the main display

NIBP

Factors that Affect Blood Pressure Measurement Accuracy:

The accuracy of non-invasive blood pressure (BP) measurement has been

shown to be affected by numerous factors. Some of the more important

aspects (based on published literature) to consider while measuring BP are:

  • Thecuffshouldfitsnugly,butwithenoughroomfortwofingerstobe

placed between the cuff and the patient’s arm (on adults), and loosely

on neonates with little or no air present within the cuff.

  • UsetheGuidanceTableprovidedtoselectthepropersizecuff.

Too small a cuff has been shown to result in the overestimation

Andere Handbücher für BeneView T1

Inhaltsverzeichnis

Andere Mindray Medizinische Geräte Handbücher

Mindray

Mindray Accutorr 7 Bedienungsanleitung

Mindray

Mindray Pulse Bedienungsanleitung

Mindray

Mindray Hepatus 7 Bedienungsanleitung

Mindray

Mindray Datascope AS 3000 Bedienungsanleitung

Mindray

Mindray MR6501 Bedienungsanleitung

Mindray

Mindray DPM 4 Bedienungsanleitung

Mindray

Mindray PM-60 Bedienungsanleitung

Mindray

Mindray DP-8500 Bedienungsanleitung

Mindray

Mindray Passport 12 Bedienungsanleitung

Mindray

Mindray M7T Bedienungsanleitung

Mindray

Mindray A8 Bedienungsanleitung

Mindray

Mindray Passport 8 Bedienungsanleitung

Mindray

Mindray SV Series Bedienungsanleitung

Mindray

Mindray DC-N3S Bedienungsanleitung

Mindray

Mindray dpm 3 Bedienungsanleitung

Mindray

Mindray DC-8 EXP Bedienungsanleitung

Mindray

Mindray DC-8 Bedienungsanleitung

Mindray

Mindray WATO EX-65 Bedienungsanleitung

Mindray

Mindray Panorama TELEPACK-608 SpO2 Bedienungsanleitung

Mindray

Mindray BeneHeart C Series Bedienungsanleitung

Mindray

Mindray DP-50T Bedienungsanleitung

Mindray

Mindray BP10 NIBP Module Bedienungsanleitung

Mindray

Mindray DC-33 Bedienungsanleitung

Mindray

Mindray A7 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung