Mindray Panorama TELEPACK-608 SpO2 Bedienungsanleitung

Quick Reference Guide

Panorama®TELEPACK–608

Datascope

Panorama®SpO2MODULE

Datascope

Panorama_Telepk QRG_0003_rB.indd 1 3/18/10 3:13:37 PM

Note: The Panorama Telepack SpO2Quick Reference

Guide is not intended as a replacement to the

Operating Instructions. Prior to operating equipment,

the user must be familiar with the Operating

Instructions Manual contents. This document is a

guideline only to be used as an aid to comprehensive

Inservice Training.

Note: The Panorama Telepack SpO2module can be

used with the Panorama Telepack-608 device and/or

the Panorama Telepack-2.4 GHz device.

P/N: 0077-00-0003-01 Rev B

Panorama®is a registered trademark of Mindray DS USA, Inc.

Panorama_Telepk QRG_0003_rB.indd 2 3/18/10 3:13:37 PM

Overview................................................1

Removing Cleaning Plug from SpO2Module..............1

Enabling the SpO2module ...............................1

Installing the SpO2patient cable and sensor..............2

Displaying the SpO2waveform ...........................2

Printing Real Time SpO2Waveform.......................3

PatientAlarms...........................................3

Viewing and Printing Trends..............................5

Viewing and Printing Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Disabling the SpO2Module ..............................6

Cleaning the SpO2Module ...............................7

Frequently Asked Questions..............................7

Print Real-Time Waveforms ...............................1

PatientDemographics ...................................2

Transfer..................................................2

Standby.................................................5

Discharge................................................8

Retrieve Discharge .......................................9

Display.................................................10

PatientAlarms..........................................11

To Mute Alarms .........................................14

LatchedAlarms.........................................15

Viewing and Printing Trends.............................16

Viewing and Printing Events.............................17

Viewing and Printing Disclosure .........................18

Viewing and Printing ST Data. . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Network ................................................20

Paging..................................................26

Table of Contents

P/N: 0077-00-0003-01 Rev B

Panorama_Telepk QRG_0003_rB.indd 3 3/18/10 3:13:37 PM

Panorama_Telepk QRG_0003_rB.indd 4 3/18/10 3:13:37 PM

Overview

The Panorama Telepack with the SpO2Module

measures functional oxygen saturation of the arterial

hemoglobin (% SpO2) and pulse rate (BPM) for the

adult patient. The following information is available

at the Panorama Central Station, ViewStation, and/or

Interactive Workstation:

1. SpO2Waveform

2. SpO2numeric data

3. Numeric Pulse Rate

Removing Cleaning Plug from SpO2Module:

To remove cleaning plug, pull the tip of the top arm from

the recess in the inside of SpO2module and pull up.

Reminder: Place cleaning plug back into SpO2module

when module is not in use.

Enabling the SpO2module:

To activate the SpO2module on the Panorama Telepack,

a. Remove the flexible cover on bottom of the

Panorama Telepack

b. Remove cleaning plug from SpO2module

c. Place flexible cover on bottom of SpO2module

d. Turn Panorama Telepack OFF by rotating battery

door counterclockwise

P/N: 0077-00-0003-01 Rev B

Panorama®Telepack-608 SpO2Quick Reference Guide

Panorama_Telepk QRG_0003_rB.indd 5 3/18/10 3:13:37 PM

Panorama®Telepack-608 SpO2Quick Reference Guide

e. Align SpO2module with Panorama Telepack and

slide SpO2module onto telemetry pack until an

audible “click” is heard

f. Ensure ECG lead wires set is connected to

Panorama Telepack

g. Turn Panorama Telepack on by rotating battery

door clockwise

Installing the SpO2patient cable and sensor:

To connect the SpO2patient cable and sensor to the

SpO2Module,

a. Connect SpO2patient cable on the bottom of the

SpO2module

b. Press to secure the SpO2patient cable into the

channels on the back of the SpO2module

c. Attach disposable SpO2sensor to patient cable

(if applicable)

Displaying the SpO2waveform:

To display the Panorama Telepack SpO2waveform

on the main display of the Panorama Central Station,

ViewStation, or Interactive Workstation,

a. Select PATIENT SETUP menu button

b. Select patient tile by touching the digital data area

or the waveform area of the tile

c. Select DISPLAY tab

P/N: 0077-00-0003-01 Rev B

Panorama_Telepk QRG_0003_rB.indd 6 3/18/10 3:13:37 PM

d. Select waveform 2

e. Choose Pleth waveform from the waveform list box

f. Choose SELECT to confirm

Printing Real Time SpO2Waveform:

To select and print an All Strips Report at the

Panorama Central Station, ViewStation, and/or

Interactive Workstation containing the SpO2waveform,

a. Select PATIENT SETUP menu button

b. Select patient tile by touching the digital data area

or the waveform area of the tile

c. Select PRINT SETUP tab

d. Select Pleth waveforms for printing

  •A✓in the waveform box indicates the waveform

is configured to print

e. Select REC adjacent to the patient tile

Patient Alarms:

The Patient Alarms tabs at the Panorama Central Station

and Interactive Workstation* allow the user to configure

alarm limits and responses of the Panorama Central

Station when an alarm violation occurs.

To adjust the patient’s SpO2alarm limits at Panorama

Central Station or Interactive Workstation*,

a. Select PATIENT ALARMS menu button

P/N: 0077-00-0003-01 Rev B

* Optional

Panorama®Telepack-608 SpO2Quick Reference Guide

Panorama_Telepk QRG_0003_rB.indd 7 3/18/10 3:13:37 PM

b. Select patient tile by touching the digital data

area or the waveform area of the tile

c. Select ALARM LIMITS tab

d. Select the SpO2Parameter using the or ➞

buttons

e. Select the High or Low SpO2alarm limit button

on the slider

f. Use the up and down arrows or drop and drag

the scroll box in the slider control to change the

limit to the desired value

To adjust a patient’s SpO2alarm responses on the

Panorama Central Station from the Panorama Central

Station and/or Interactive Workstation*,

a. Select PATIENT ALARMS menu button

b. Select patient tile by touching the digital data

area or the waveform area of the tile

c. Select ALARM RESPONSES tab

d. Select and highlight the SpO2parameter

e. Select

  • Priority-Adjuststheimportanceofthealarm.

The lower the priority the higher the severity.

  • PrintOnAlarm-Determinesifanautomatic

Print on Alarm Report is produced upon the

alarm condition.

➞

P/N: 0077-00-0003-01 Rev B

* Optional

Panorama®Telepack-608 SpO2Quick Reference Guide

Panorama_Telepk QRG_0003_rB.indd 8 3/18/10 3:13:37 PM

Panorama®Telepack-608 SpO2Quick Reference Guide

  • SaveToEvent-Determinesifthealarmevent

is saved in the Events tab to be retrieved at a

later time.

  • PageOnAlarm*-Determinesifthealarmevent

sends a page request to the assigned pager(s).

Viewing and Printing Trends:

The List Trends Tab at the Panorama Central Station,

ViewStation, and Interactive Workstation allows viewing

and printing of all available vital sign information in list

and graphic formats.

To view and print List Trends at Panorama Central

Station, ViewStation, and/or Interactive Workstation,

a. Select VIEW adjacent to the patient tile

b. Select TRENDS tab to view the trend list

c. Select PRINT menu button

  • PRINT CURRENT to print one page of

trended information

  • PRINT _ HOUR to print a configured

interval of trended information

Viewing and Printing Events:

The Events Tab at the Panorama Central Station,

ViewStation, and Interactive Workstation stores configured

physiologic and technical events on a patient.

P/N: 0077-00-0003-01 Rev B

* Optional

Panorama_Telepk QRG_0003_rB.indd 9 3/18/10 3:13:37 PM

To view Events at the Panorama Central Station,

Viewstation, and/or Interactive Workstation,

a. Select VIEW adjacent to the patient tile

b. Select EVENTS tab to view the Event List

To view and print an SpO2event in the Event List at

the Panorama Central Station, Viewstation, and/or

Interactive Workstation,

a. Select VIEW adjacent to the patient tile

b. Select EVENTS tab to view the event list screen

c. Select and highlight the SpO2event

d. Select VIEW WAVEFORM sidebar button

e. Select PRINT to print the 20 second stored event

Note: The waveforms printed are determined by the

patient’s PRINT SETUP Tab.

Disabling the SpO2Module:

To remove SpO2module from Panorama Telepack,

a. Turn Panorama Telepack OFF by rotating the

battery door counterclockwise

b. Press the blue button on the right side of

the module until an audible “click” is heard

(Disengaging the module)

c. Remove the Panorama Telepack from the SpO2

module

P/N: 0077-00-0003-01 Rev B

Panorama®Telepack-608 SpO2Quick Reference Guide

Panorama_Telepk QRG_0003_rB.indd 10 3/18/10 3:13:37 PM

Inhaltsverzeichnis

Andere Mindray Medizinische Geräte Handbücher

Mindray

Mindray BeneHeart D3 Bedienungsanleitung

Mindray

Mindray Resona I9 Bedienungsanleitung

Mindray

Mindray MR6401 Bedienungsanleitung

Mindray

Mindray Panorama Bedienungsanleitung

Mindray

Mindray Resona 7 Bedienungsanleitung

Mindray

Mindray PM-9000 Bedienungsanleitung

Mindray

Mindray Accutorr 3 Bedienungsanleitung

Mindray

Mindray BeneHeart D3 Bedienungsanleitung

Mindray

Mindray BeneVision N1 Bedienungsanleitung

Mindray

Mindray DC-70T Bedienungsanleitung

Mindray

Mindray Passport V Bedienungsanleitung

Mindray

Mindray TE7 Bedienungsanleitung

Mindray

Mindray MR6501 Bedienungsanleitung

Mindray

Mindray DC-32 Bedienungsanleitung

Mindray

Mindray Accutorr 7 Bedienungsanleitung

Mindray

Mindray Trio Bedienungsanleitung

Mindray

Mindray BeneHeart D3 Bedienungsanleitung

Mindray

Mindray Passport 5-Lead Bedienungsanleitung

Mindray

Mindray M6Vet Bedienungsanleitung

Mindray

Mindray Accutorr 7 Bedienungsanleitung

Mindray

Mindray Accutorr 7 Bedienungsanleitung

Mindray

Mindray BeneHeart D1 Bedienungsanleitung

Mindray

Mindray BP10 NIBP Module Bedienungsanleitung

Mindray

Mindray M5 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung