Mindray BP10 NIBP Module Bedienungsanleitung

BP10 NIBP Module

Quick Reference Guide

BP10

Note: The BP10 NIBP Module Quick Reference Guide is not

intended as a replacement to the Operating Instructions.

Prior to operating equipment, the user must be familiar

with the Operating Instructions Manual contents. This

document is a guideline only to be used as an aid to

comprehensive Inservice Training.

P/N: H-046-011009-00 Rev 2.0

Table of Contents

PHYSICAL VIEW ................................................1

MAIN SCREEN ..................................................3

MAIN MENU....................................................5

SELECT AND CONFIGURE AN OPTION. . . . . . . . . . . . . . . . . . . . . . . . . . . .6

PATIENT SETUP.................................................6

Adjust Patient Category ................................................6

Discharge ........................................................7

STANDBY ......................................................7

Enter Standby .........................................................7

Exit Standby ...........................................................7

NIBP MEASUREMENT ...........................................8

Measurement Mode ...................................................8

Start and Stop Measurements ..........................................8

PAIRING A BP10 WITH TD60/TM80...............................8

SWITCH ON/OFF THE AUDIO ....................................9

CLEAN/DISINFECT THE BP10 ....................................9

Clean the BP10 ........................................................9

Disinfect the BP10 ....................................................13

CLEAN/DISINFECT REUSABLE NIBP CUFF ...................... 13

Clean the Reusable NIBP Cuff..........................................13

Disinfect the Reusable NIBP Cuff ......................................14

STERILIZATION ............................................... 14

P/N: H-046-011009-00 Rev 2.0

P/N: H-046-011009-00 Rev 2.0 1

BP10 NIBP Module Quick Reference Guide

PHYSICAL VIEW

BP10

NIBP

1. Display

2. Confirmation key

When the desired option is highlighted, press this key to select or

activate the corresponding function.

3. Main Menu key

Press this key to turn to the main menu.

4. NIBP start/stop key

• When NIBP is being measured in process, press this key to stop the

NIBP measurement.

• When NIBP is not being measured idle, press this key to start an NIBP

measurement.

P/N: H-046-011009-00 Rev 2.0 2

BP10 NIBP Module Quick Reference Guide

5. Down key

Press this key to move down along the column of menu options or

configuration choices.

6. Return key

• Press this key to return to the previous menu and save the settings.

• Press this key to switch between two main screens.

7. Up key

Press this key to move up along the column of menu options or

configuration choices.

8. Power On/Off key

• When BP10 is powered off, press this key to turn BP10 on.

• When BP10 is powered on, press and hold this key to display the

power off confirmation menu.

• If the screen display is on, press this key to turn the display off.

9. MPAN (Mindray Patient Area Network) key

• When BP10 is disconnected from the MPAN, press this key to begin the

bluetooth pairing process.

• When BP10 is connected with the MPAN, press this key to unpair any

connected bluetooth devices.

10. NIBP cuff connector

Connect the NIBP hose.

P/N: H-046-011009-00 Rev 2.0 3

BP10 NIBP Module Quick Reference Guide

MAIN SCREEN

mmHg 120

72 (84)

SYS

DIA

MAPPR

BPM

@ 10:00 PM 00:00:05

2015/08/08

NIBP-001

Sequence:P1

10:03 PM

DIA

mmHg

SYS/DIA PRMAP

@ 10:00 PM 00:00:05

120/80 (94) 60

09:35 PM

116/78 (94) 61

PR BPM

09:40 PM

118/82 (92) 60

09:45 PM

120/80 (94) 59

09:50 PM

126/86 (96) 61

09:55 PM

120/80 (94) 60

2015/08/08

NIBP-001

10:03 PM

P/N: H-046-011009-00 Rev 2.0 4

BP10 NIBP Module Quick Reference Guide

1. Patient category

The current patient category setting is shown in white.

2. Device name

3. Date and time

This area displays the date and time.

4. Audio off symbol

The audio off symbol displays when the technical audio is turned off.

5. MPAN (Mindray Patient Area Network) symbol

The MPAN symbol displays when the MPAN is turned on.

6. Battery symbol

This symbol indicates the battery charge status.

7. Operation mode

8. NIBP measurement area

This area shows the current values or measurement list.

• When the NIBP is measuring, this area shows the real-time

measurement values.

• When more than 30 seconds elapses after an NIBP measurement ends,

this area automatically displays the measurement list.

9. Message area

The message area shares the same position as patient category and

operation mode.

P/N: H-046-011009-00 Rev 2.0 5

BP10 NIBP Module Quick Reference Guide

MAIN MENU

PatientPatient Info

10-13-2013

Cad... Rajagopalan 41059080

10:03 PM

Clear Prompt

History

NIBP STAT

Mode Manual

Venipuncture

Stop All

Patient

01-13-2015

NIBP-001

10:03 PM

Clear Prompt

History

NIBP STAT

Mode Manual

Venipuncture

Stop All

Patient Info

1. Heading: displays the current menu title.

2. Highlighted bar: indicates the current cursor position.

3. Scroll bar: shows the current position in a menu.

4. Main body: contains menu options and other controls to configure and

operate the device.

• accesses a submenu to reveal more options or information.

• indicates that a password is required.

P/N: H-046-011009-00 Rev 2.0 6

BP10 NIBP Module Quick Reference Guide

SELECT AND CONFIGURE AN OPTION

1. Use the and keys to move the highlighted bar to an

appropriate position.

2. Press the key to select the option where the highlighted bar

locates.

If an option can be configured, the choice place will have up and down

arrows, as indicated in the following figure.

Up arrow

Down arrow

1. Use the and keys to scroll the choices.

2. Press the key to select the appropriate choice when it displays.

3. Press the key to save the setting.

4. Press the key to exit the menu.

PATIENT SETUP

Adjust Patient Category

The Patient Info menu allows the clinician to adjust the patient category.

Note: Ensure the patient category selection is appropriate for the patient

before taking a measurement.

To adjust the patient category:

1. Press the key to enter the main menu

2. Select Patient Info

3. Select Patient Category to select the patient category

4. Select to confirm that the patient category

5. Press the key to exit the menu

Note: Adjusting patient category restores the BP10 to the default (preset)

settings but does not clear patient information.

Andere Handbücher für BP10 NIBP Module

Inhaltsverzeichnis

Andere Mindray Medizinische Geräte Handbücher

Mindray

Mindray PM-7000 Bedienungsanleitung

Mindray

Mindray datascope duo Bedienungsanleitung

Mindray

Mindray Panorama TELEPACK-608 SpO2 Bedienungsanleitung

Mindray

Mindray VS9 Bedienungsanleitung

Mindray

Mindray cPM 12 Bedienungsanleitung

Mindray

Mindray Accutorr 7 Bedienungsanleitung

Mindray

Mindray DC-70 Bedienungsanleitung

Mindray

Mindray VS9 Bedienungsanleitung

Mindray

Mindray BeneFusion mNP Bedienungsanleitung

Mindray

Mindray BeneVision N1 Bedienungsanleitung

Mindray

Mindray Trio Bedienungsanleitung

Mindray

Mindray DC-8 Bedienungsanleitung

Mindray

Mindray PM-50 Bedienungsanleitung

Mindray

Mindray A5 Bedienungsanleitung

Mindray

Mindray Datascope AS 3000 Bedienungsanleitung

Mindray

Mindray BP10 NIBP Module Bedienungsanleitung

Mindray

Mindray Passport 5-Lead Bedienungsanleitung

Mindray

Mindray DC-3 Bedienungsanleitung

Mindray

Mindray A Series Bedienungsanleitung

Mindray

Mindray iMEC12 Bedienungsanleitung

Mindray

Mindray Pulse Bedienungsanleitung

Mindray

Mindray Accutorr 3 Bedienungsanleitung

Mindray

Mindray DPM 5 Bedienungsanleitung

Mindray

Mindray Spectrum Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung