Mindray Panorama Bedienungsanleitung

Panorama®

Datascope

Software Version 8.2X and below

Quick Reference Guide

Note: The Quick Reference Guide is not intended as

a replacement to the Operating Instructions. Prior to

operating equipment, the user must be familiar with

the Operating Instructions Manual contents.

This document is a guideline only to be used as an

aid to comprehensive Inservice Training.

P/N: 0002-08-7538 Rev C

Panorama®is a registered trademark of Mindray DS USA, Inc.

Table of Contents

Print Real-Time Waveforms ...............................1

PatientDemographics ...................................1

Standby .................................................2

Discharge................................................4

Display..................................................5

PatientAlarms...........................................6

To Mute Alarms ..........................................7

To Acknowledge Latched Alarms .........................7

View List Trends..........................................8

View Events..............................................8

View Disclosure ..........................................9

View ST Data............................................10

P/N: 0002-08-7538 Rev C

Print Real-Time Waveforms:

To print a recording of current waveform data at Panorama

Central Station,

a. Select the REC key adjacent to the desired patient’s

waveform.

b. To adjust which waveforms are printed for the

selected patient tile, select the PATIENT SETUP menu

button PRINT SETUP tab.

Patient Demographics:

To enter demographics at Panorama Central Station,

a. Select PATIENT SETUP menu button.

The Demographics Tab will be displayed.

b. Select patient tile by tapping patient data tile

or waveform area.

c. Select the text box in the Demographics tab to

produce on-screen controls for entering data.

d. Enter desired text.

e. If using a bedside monitor, the information entered

at the Panorama will be automatically sent to the

bedside monitor’s demographics area.

Demographic information that has been entered at

the bedside monitor will be automatically sent to the

Panorama Central Station’s demographic area for that

patient tile.

P/N: 0002-08-7538 Rev C

Panorama®Quick Reference Guide

Standby:

The Standby mode will disable all of a patient’s alarms at

the Panorama Central Station, and will suspend

processing of patient data, allowing the user to

disconnect a patient from a monitor without losing

the patient’s historical data and set-up priorities. Patients

should be closely observed if the monitoring system is

placed in Standby mode.

To enter the STANDBY mode at the Panorama Central

Station,

a. Select PATIENT SETUP menu button.

b. Select patient tile by tapping patient data tile or

waveform area.

c. Select the STANDBY tab.

  •Select“PanoramaStandbyOnly”buttonto

place only the Panorama Central Station into

the Standby mode.

  •Select“PanoramaandBedsideStandby”toplace

the Panorama Central Station and the bedside

monitor into the Standby Mode.

d. You may select a patient location by pressing over

thelocationintheStandbyListBox,andthepressing

the SELECT button.

P/N: 0002-08-7538 Rev C

Panorama®Quick Reference Guide

To enter the STANDBY mode at the bedside monitor,

a. Press the STANDBY key on the front panel of the

bedside monitor.

b. This will place the bedside monitor and the

Panorama Central Station into Standby mode.

To remove patient from PANORAMA STANDBY ONLY mode,

a. Select PATIENT SETUP menu button.

b. Select patient tile by tapping patient data tile or

waveform area.

c. Select the STANDBY tab.

 d. Selectthe“ResumeMonitoring”buttontoresume

monitoring at the Panorama Central Station.

To remove patient from PANORAMA AND BEDSIDE STANDBY

mode,

a. To remove a patient from Standby mode press

the STANDBY button on the front panel of the

bedside monitor. This will resume monitoring at the

Panorama Central Station and the bedside monitor.

To remove patient from STANDBY at the bedside monitor,

a. To remove a patient from Standby mode press

the STANDBY button on the front panel of the

bedside monitor. This will resume monitoring at the

Panorama Central Station and the bedside monitor.

P/N: 0002-08-7538 Rev C

Panorama®Quick Reference Guide

Discharge:

The discharge function allows the discharge of patient

information, and to reset the Panorama Central Station for

the next patient.

To discharge at Panorama Central Station,

a. Press PATIENT SETUP.

b. Select patient tile by tapping over patient data

or waveform area.

c. Select the DISCHARGE tab.

d. Press DISCHARGE PATIENT.

 e. Apromptwillappearthatasks“Areyousure?”

f. Selecting YES will erase all data stored at the

Panorama.

g. Selecting NO will continue monitoring of that patient.

h. Discharging patient at Panorama does not erase

information stored at bedside monitor.

To discharge at bedside monitor,

a. Press the DISCHARGE key on the front panel of the

bedside monitor.

b. Selecting the DISCHARGE FROM BOTH option will

erase all information stored at the Panorama and at

the bedside monitor for that patient.

*If a patient is discharged from the Central Station but not

from the patient monitor, the Central Station tile will not

P/N: 0002-08-7538 Rev C

Panorama®Quick Reference Guide

Andere Handbücher für Panorama

Inhaltsverzeichnis

Andere Mindray Medizinische Geräte Handbücher

Mindray

Mindray BeneView T1 Bedienungsanleitung

Mindray

Mindray A7 Bedienungsanleitung

Mindray

Mindray DPM 6 Bedienungsanleitung

Mindray

Mindray Datascope AS 3000 Bedienungsanleitung

Mindray

Mindray DPM 1 Bedienungsanleitung

Mindray

Mindray Panorama TELEPACK-608 SpO2 Bedienungsanleitung

Mindray

Mindray DC-N3S Bedienungsanleitung

Mindray

Mindray Hepatus 7 Bedienungsanleitung

Mindray

Mindray DP-8500 Bedienungsanleitung

Mindray

Mindray DPM 1 Bedienungsanleitung

Mindray

Mindray DPM 4 Bedienungsanleitung

Mindray

Mindray Rosebud Accutorr V Bedienungsanleitung

Mindray

Mindray ePM 10M Bedienungsanleitung

Mindray

Mindray A Series Bedienungsanleitung

Mindray

Mindray BeneVision N1 Bedienungsanleitung

Mindray

Mindray PM-7000 Bedienungsanleitung

Mindray

Mindray M5 Bedienungsanleitung

Mindray

Mindray VS9 Bedienungsanleitung

Mindray

Mindray DC-T6 Bedienungsanleitung

Mindray

Mindray SV Series Bedienungsanleitung

Mindray

Mindray DC-33 Bedienungsanleitung

Mindray

Mindray iMEC12 Bedienungsanleitung

Mindray

Mindray uMEC10 Bedienungsanleitung

Mindray

Mindray A3 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung