Mindray Veta 3 Bedienungsanleitung

2. Install the Main Unit

4. Install the CO2 Absorbent Canister

3. Install the Breathing Circuit (Veta 5 Only)

1. Install the Trolley

Main unit

supporting

board

Veta 3/Veta 5 Installation Guide

Insert the column into the trolley base; then, put the trolley down and tighten the screws.

Lock four casters of the trolley. Then, place the main unit securely on the trolley by aligning

three positioning columns under the main unit with three locating pins on the trolley, and

tighten screws.

a. Align the guiding post slots of the breathing system with the guiding post of the main unit

circuit connector, and fix the breathing circuit with screws.

b. Fix the fastener under the supporting board and insert the inner hexagon spanner into it.

c. Insert the microswitch cable plug into the slot.

Rotate the CO2 absorbent canister counterclockwise to fix it.

5. Install the Bellows (Veta 5 Only)

Tools：

●M8X25 screws：4

●Inner hexagon spanner

Column

Tools：

●M8X25 screws：4

●Inner hexagon spanner

Positioning column

Microswitch

cable plug

Screws

Check the

connector for

absorbent

particles.

6. Install the Basket

Hang the basket on the handrail of the machine directly or install it on the column.

Screws

Inner hexagon spanner

a. Attach the bottom ring of the bellows to the bellows base and ensure that the bellows is

tightly connected to the base.

b. Align the bellows housing bayonet with the slots, and rotate it clockwise firmly.

Tools：

●M8X25 screws：3

●Inner hexagon spanner

Tools：

●M4X12 screws：4

●Phillips screwdriver

Screws

9. Install the Anesthesia Gas Filter Canister

8. Install the Tray or Weigher (Optional) 10. Connect the AGSS System or Passive Scavenging Pipe (Optional)

a. Place the anesthesia gas filter canister (self-prepared) on the weigher or the tray by

aligning the groove.

b. Use the silicone tube to connect the gas filter canister with the AGSS inlet pipeline

connector.

AGSS inlet pipeline connector

Silicone tube

Anesthesia gas filter

canister

AGSS support rail

Stop pin

AGSS gas supply

hose ools：

●M4X12 screws：2

●Phillips screwdriver

7. Install the Oxygen Generator Tray and Connector (Optional)

a. Fix the oxygen generator tray assembly to the column and trolley by using screws and the

fixing plate respectively.

b. Rotate the oxygen generator connector clockwise into the gas supply inlet and connect the

oxygen generator with a tube.

Tray assembly

a. Insert the tray or weigher (Veta 5 Only) into the screw arbor and tighten the screws.

b. Connect the weigher cable with the communication interface (SP).

c. Use three silicon plugs to attach the cable to the column and fix the cable on the back of

the machine.

Knob

a. Rotate the two stop pins into the AGSS support rail and fix the AGSS support rail into the

side of column with screws.

b. Insert the AGSS assembly into the AGSS support rail and rotate the knob tightly. Use the

AGSS gas supply hose to connect the waste gas outlet with the AGSS assembly inlet.

c. Connect the waste gas outlet with the passive scavenging pipe when using the passive

scavenging method.

Passive scavenging pipe

Veta 3/Veta 5 Installation Guide

Screws

Tools：

●M4X12 screws：6

●Phillips screwdriver

Tools：

●M4X12 screws：4

●Phillips screwdriver

0 4 6 - 0 2 2 5 1 5 - 0 0 ( 1 . 0 )

Dieses Handbuch passt für folgende Modelle

Andere Mindray Medizinische Geräte Handbücher

Mindray

Mindray BeneFusion mNP Bedienungsanleitung

Mindray

Mindray ePM 10M Bedienungsanleitung

Mindray

Mindray datascope duo Bedienungsanleitung

Mindray

Mindray SV Series Bedienungsanleitung

Mindray

Mindray dpm 3 Bedienungsanleitung

Mindray

Mindray DC-8 Bedienungsanleitung

Mindray

Mindray Passport 8 Bedienungsanleitung

Mindray

Mindray BeneView T6 Bedienungsanleitung

Mindray

Mindray BeneVision TD60 Bedienungsanleitung

Mindray

Mindray DPM 5 Bedienungsanleitung

Mindray

Mindray DC-32 Bedienungsanleitung

Mindray

Mindray A7 Bedienungsanleitung

Mindray

Mindray TE7 Bedienungsanleitung

Mindray

Mindray Pulse Bedienungsanleitung

Mindray

Mindray A5 Bedienungsanleitung

Mindray

Mindray Passport 12 Bedienungsanleitung

Mindray

Mindray M8 Elite Bedienungsanleitung

Mindray

Mindray DP-50T Bedienungsanleitung

Mindray

Mindray DC-70 Pro Bedienungsanleitung

Mindray

Mindray DC-70T Bedienungsanleitung

Mindray

Mindray PM-9000 Bedienungsanleitung

Mindray

Mindray Resona 7 Bedienungsanleitung

Mindray

Mindray Accutorr 7 Bedienungsanleitung

Mindray

Mindray Panorama TELEPACK-608 SpO2 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung