Mindray WATO EX-65 Bedienungsanleitung

WATO EX-65

Anesthesia Machine Quick Guide

Shenzhen Mindray Bio-Medical Electronics Co., Ltd.

rights reserved. Contents of this guide are subject to change without prior notice.

This guide contains the basics necessary to operate the product safely and quickly.

For details, refer to the Operator's Manual.

Notes:

Observance of this guide is a prerequisite for proper product performance and

correct operation and ensures patient and operator safety.

This guide is based on the maximum conﬁguration and therefore some contents

may not apply to your product. If you have any question, please contact us.



0123

The product bears CE mark indicating its conformity with the

provisions of the Council Directive 93/42/EEC concerning medical

devices.

Product Introduction

1.Brake

Pipeline pressure gauge

3.Total ﬂowmeter

4.Flow control

5.Electronic ﬂowmeter

6.Ventilator control panel

7.Control knob

8. Display

9.Vaporizer

10.Gas supply connector

11.System switch

12.Cylinder pressure gauge

13.O2 ﬂush button

14.

Auxiliary electrical outlet

15.Drawer lock

16.Worktable (with drawer)

Product Introduction

1.O2 sensor connector

Inspiration connector

3.Expiration connector

4.Inspiratory check valve

5.Expiratory check valve

6.Bellows housing

7.Sample gas return port

8.Manual bag port

9.Bag/mechanical

ventilation switch

10.APL (Airway Pressure

Limit) valve

11.O2 sensor connector

12.Rotary handle

13.Sodalime canister

Product Introduction

1.Cylinder connector

2.Equipotential stud

3.Fan

4.Mains inlet

5.Network connector

CIS 12 V power supply

connector

7.Speaker

8.Auxiliary O2 supply

9.ACGO (Auxiliary Common

Gas Outlet) switch

10.Module slot

11.AGSS outlet

12.AGSS Transfer and

Receiving System

Control Panel

The control panel is located beneath the ventilator display, as shown below:

1. Battery LED

2. AC power LED

3. Operating state LED

4. Alarm silence key

To set alarm silence state, push this key to enter 120 s alarm silenced

status. The alarm silence symbol and 120 s countdown time appear in

the upper right corner of the screen.

To clear alarm silence, push this key again.

5. Standby key

Push to enter or exit standby mode.

6. Normal screen key

Push to clear all menus popping up on the screen and return to the normal

screen.

7. MV&TVe alarm key

In case of manual ventilation mode: Push the key to switch off MV and TVe

overrange alarms and apnea alarm. Push the key again to switch on MV

and TVe overrange alarms and apnea alarm.

In case of mechanical ventilation mode: Push the key to switch off MV

and TVe overrange alarms. Push the key again to switch on MV and TVe

overrange alarms.

8. Control knob

Push the control knob to select a menu option or conﬁrm your setting. Turn

the control knob clockwise or counterclockwise to scroll through the menu

options or change your settings.

123 4 5 6 7 8

12 345 6 78 9

Display Screen

This anesthesia machine adopts a high-resolution color TFT LCD to display

various parameters, spirometry loops and waveforms (airway pressure, flow,

volume, EtCO2, etc).

The following is a standard display screen. For descriptions of other screens,

refer to Operator's Manual.

1. Ventilation mode prompt area

Displays the current ventilation mode. If manual ventilation is selected for the

bag/mechanical ventilation switch, is displayed in this area. Otherwise,

the currently selected mechanical ventilation mode is displayed.

2. Lung icon

The icon is displayed when SIMV-VC or SIMV-PC mode is selected and

inspiration triggering action is done currently.

3. MV&TVe alarm off icon

4. Physiological alarm area

5. Apnea alarm off icon

6. Alarm silence icon area

7. System time

8. Technical alarm area

9. Power supply state icon area

Displays power source or battery icon. The icon is displayed when

the anesthesia machine is powered by AC power source. The battery icon

is displayed when the anesthesia machine is battery powered to indicate

battery capacity.

10.[Vent Mode] shortcut key

Used to select mechanical ventilation mode.

11.[Alarm Setup] shortcut key

Used to change the alarm settings for the anesthetic ventilator, gas module

or BIS module.

12.[Screens] shortcut key

Used to set user screen.

13.[User Setup] shortcut key

Used to change the settings for TV compensation, O2 monitoring source,

gas module, BIS module, screen, sound etc.

14.[Maintenance] shortcut key

Used to perform leak test, calibrate O2 sensor and ﬂow sensor, view trend

graph, trend table and alarm logbook, and set language, system time,

pressure unit, IP address etc.

15. Timer Setup shortcut key

16. Parameter Setup shortcut keys area

Used to set the parameters related to mechanical ventilation mode. Shortcut

keys arrangement is subject to speciﬁc mechanical ventilation mode.

17. System prompt message area

18. Parameter & graph area

Displays the parameters, waveforms, spirometry loops, or electronic

ﬂowmeter graphs which the anesthetic ventilator, gas module, or BIS module

monitors. Different types of screens are displayed based on the actual

system conﬁguration or screen layout settings.

Display Screen

Andere Handbücher für WATO EX-65

Inhaltsverzeichnis

Andere Mindray Medizinische Geräte Handbücher

Mindray

Mindray DC-33 Bedienungsanleitung

Mindray

Mindray Accutorr 3 Bedienungsanleitung

Mindray

Mindray dpm 3 Bedienungsanleitung

Mindray

Mindray DC-8 EXP Bedienungsanleitung

Mindray

Mindray Passport 2LT Bedienungsanleitung

Mindray

Mindray Passport 8 Bedienungsanleitung

Mindray

Mindray DICOM Bedienungsanleitung

Mindray

Mindray TM70 Bedienungsanleitung

Mindray

Mindray Resona 7 Bedienungsanleitung

Mindray

Mindray Accutorr 7 Bedienungsanleitung

Mindray

Mindray PM-60 Bedienungsanleitung

Mindray

Mindray Panorama Bedienungsanleitung

Mindray

Mindray A5 Bedienungsanleitung

Mindray

Mindray DC-40 Bedienungsanleitung

Mindray

Mindray DPM 5 Bedienungsanleitung

Mindray

Mindray BeneVision TD60 Bedienungsanleitung

Mindray

Mindray DPM 1 Bedienungsanleitung

Mindray

Mindray PM-50 Bedienungsanleitung

Mindray

Mindray SV Series Bedienungsanleitung

Mindray

Mindray 046-017666-00 Bedienungsanleitung

Mindray

Mindray BeneHeart D3 Bedienungsanleitung

Mindray

Mindray Spectrum Bedienungsanleitung

Mindray

Mindray DPM 4 Bedienungsanleitung

Mindray

Mindray PM-9000 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung