Mini Gadgets BBSTissueBox Bedienungsanleitung

1 Version 2.3

Bush Baby Stealth Tissue Box

Manual

SKU: BBSTissueBox

2 Version 2.3

THANK YOU FOR PURCHASING THE

BBSTISSUEBOX

Please read this manual before operating the

camera and keep it handy.

Your purchase should include:

1 x BBSTissue

1 x Remote Control

1 x Removable Battery

1 x MicroUSB Cable

1 x MiniUSB 8 Pin Cable

1 x User Manual

1 x 16GB MicroSD Card

1 x MicroSD Card Reader

1 x AC Charger

3 Version 2.3

GET FAMILIAR WITH YOUR BBSTISSUEBOX

4 Version 2.3

5 Version 2.3

BEFORE YOU START

To preserve battery power, your device will

come with the battery connector disconnected.

Before attempting to use the device be sure to

connect the battery’s connector to the circuit

board power lead.

Note: If you are not located in the US, or if you

intend to use this product anywhere other than

the US, you will need to purchase a converter in

order to use the AC wall plug in and avoid

damaging the product. Because different

countries use different voltages in their

electrical wiring, you will need a converter that

adapts to the current in your particular country.

IMPORTANT WARRANY INFORMATION: If the

warranty sticker on your device has been

removed or tampered with, your lifetime

6 Version 2.3

warranty will be voided. You may be charged

fees or denied a return should this happen.

OPERATING THE CAMERA

NOTICE: Allow the device to charge 4 –6 hours

before using.

CHARGING THE BATTERY

1. Open the tissue box

2. Plug the USB cable into the power bank

inside the tissue box.

3. Plug the other end of the USB cable into

the AC wall adapter.

4. Wait 6 to 8 hours for the battery to be

fully charged.

5. After charging, connect the power bank

to the camera board with the included

mini-usb 8 pin cable.

7 Version 2.3

HOW TO TURN ON THE CAMERA

1. Point the remote control at the camera

and press the “Power button” (see page

5).

2. The camera is now in Standby Mode.

HOW TO TURN OFF THE CAMERA

1. Press the “Power Button” on the

remote control once more.

2. The camera is now off.

HOW TO RECORD CONTINUOUS VIDEO (720P)

1. When the camera is in Standby Mode,

press the “B” button once quickly (see

page 4). The unit will vibrate twice.

2. Once the unit quits vibrating, the

camera is now recording video.

3. To stop the recording, press the B

button again, and wait three seconds.

8 Version 2.3

The device has saved the recording, and

it has returned to standby mode.

HOW TO RECORD CONTINUOUS VIDEO (1080P)

1. While the camera is in standby mode,

hold the “C” button for 3 seconds then

let go.

2. The unit will vibrate three times. The

camera is now recording 1080P video.

3. To save video and return to standby

mode, quickly press the C button, and

wait three seconds.

HOW TO TAKE PICTURES

1. When the camera is in Standby Mode,

press the “C” button (see page 4). The

unit will vibrate once, and then take a

picture. It then returns to standby

mode.

HOW TO RECORD MOTION DETECTION

9 Version 2.3

1. In Standby mode, press the “D” button

one time (see page 4). The unit will

vibrate three times.

2. The unit is now in motion detection

mode and will begin recording video

once motion is detected. There will be

no indication when the unit detects

motion –it will start recording

automatically.

3. To return to standby mode and stop

motion detection, press the “D” button

again, and the unit will vibrate.

MICROSD CARD SLOT

To access the MicroSD Card Slot, you must look

inside the device.

1. Gently push the MicroSD Card into the

slot. The gold contacts on the card will

be inserted first, and they should face

the front of the device. You will feel

10 Version 2.3

some spring resistance before the card

clicks in to place.

2. Never force the card into the Card Slot

under any circumstance. Otherwise, the

unit or the MicroSD card itself will be

damaged.

3. To remove the SD card, gently push the

card in so that it clicks.

4. The internal spring tension will eject the

card.

MicroSD cards 65GB and above will require

special formatting to work. The device will

not function with these cards if they are not

properly formatted beforehand.

Visit www.mgidownloads.com/Software

and download the “guiformat.zip” file.

Extract the files and follow the instructions

in the “64GB SD Card Formatting.pdf”

document.

Inhaltsverzeichnis

Andere Mini Gadgets Haushaltsgeräte Handbücher

Mini Gadgets

Mini Gadgets BB2TissueBox Bedienungsanleitung

Beliebte Haushaltsgeräte Handbücher anderer Marken

Mesko

Mesko MS 9613 Bedienungsanleitung

Allied Moulded Products

Allied Moulded Products SLIDERBOX SBFB-1N Bedienungsanleitung

Coopers of Stortford

Coopers of Stortford F996 Bedienungsanleitung

Pella

Pella 802Q0101 Bedienungsanleitung

Ellia

Ellia aspire ARM-1210 Bedienungsanleitung

IKEA

IKEA VÄXER Bedienungsanleitung

Project Source

Project Source 08-3843 Bedienungsanleitung

impey

impey Aqua-Grade Linear Bedienungsanleitung

JML

JML DriBUDDI Bedienungsanleitung

ECODROP

ECODROP RV0813 Bedienungsanleitung

AquaPur

AquaPur Terry Bedienungsanleitung

pols potten

pols potten Taro in pot 540-300 Series Bedienungsanleitung

AeroBed

AeroBed Premier IntelliWarmth Bedienungsanleitung

Allen + Roth

Allen + Roth WSWS-WB1 Bedienungsanleitung

AEG

AEG MWTK60 Bedienungsanleitung

Sunbeam

Sunbeam heated bedding Bedienungsanleitung

Nokia

Nokia Nokia Sleep Bedienungsanleitung

Velleman

Velleman XMCL12 Bedienungsanleitung