MinimumRC ASG-32 Bedienungsanleitung

Andere MinimumRC Spielzeug Handbücher

MinimumRC

MinimumRC A6M5-D Bedienungsanleitung

MinimumRC

MinimumRC DH-88 Comet Bedienungsanleitung

MinimumRC

MinimumRC T-28 Trojan Bedienungsanleitung

MinimumRC

MinimumRC Beech V-35 Handbuch

MinimumRC

MinimumRC Beech V-35 Bedienungsanleitung

MinimumRC

MinimumRC Cessna-152 Bedienungsanleitung

MinimumRC

MinimumRC F8F Rare Bear Handbuch

MinimumRC

MinimumRC F8F-RareBear Pro Bedienungsanleitung

MinimumRC

MinimumRC LISA Bedienungsanleitung

MinimumRC

MinimumRC Butterfly V1 Bedienungsanleitung

MinimumRC

MinimumRC F8F Rare Bear Handbuch

MinimumRC

MinimumRC F8F-RareBear Pro Bedienungsanleitung

MinimumRC

MinimumRC Cessna L-19 Bedienungsanleitung

MinimumRC

MinimumRC KI-61 Tony Bedienungsanleitung

MinimumRC

MinimumRC Spacewalker V2 Bedienungsanleitung

MinimumRC

MinimumRC Messerschmitt BF-109 Bedienungsanleitung

MinimumRC

MinimumRC Minimoa Bedienungsanleitung

MinimumRC

MinimumRC Shrimp V2 Bedienungsanleitung

MinimumRC

MinimumRC Fan-Jet 600 Bedienungsanleitung

MinimumRC

MinimumRC T-34 Mentor Bedienungsanleitung

MinimumRC

MinimumRC A6M5-Q Series Bedienungsanleitung

MinimumRC

MinimumRC Cessna L-19 Bedienungsanleitung

MinimumRC

MinimumRC Ju-87 Bedienungsanleitung

MinimumRC

MinimumRC J-3 Bedienungsanleitung

Beliebte Spielzeug Handbücher anderer Marken

marklin

marklin 37321 Bedienungsanleitung

Canon

Canon PAPER CRAFT Bedienungsanleitung

GREAT PLANES

GREAT PLANES Pitts M-12S Bedienungsanleitung

NOCH

NOCH 14261 Bedienungsanleitung

Hausler

Hausler 450 SE V2 Bedienungsanleitung

Dynaflite

Dynaflite Daydream Bedienungsanleitung

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Handbuch

Kenner

Kenner Batman 63651 Bedienungsanleitung

LEGO

LEGO 8527 Bedienungsanleitung

iKarus

iKarus ECO 8 Bedienungsanleitung

Multiplex

Multiplex EasyStar II Bedienungsanleitung

Walkera

Walkera 38 Bedienungsanleitung

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Bedienungsanleitung

MD

MD MXION SWD Bedienungsanleitung

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Bedienungsanleitung

marklin

marklin 39671 Bedienungsanleitung

Meccano

Meccano 15103 Bedienungsanleitung

LEGO

LEGO TECHNIC 8735 Bedienungsanleitung

ASG-32 Glider

Assembly Instructions

Important notification

1.The model is supplied with UFO and 502 glue. UFO is for bonding foam parts, and 502 for

bonding wood, carbon fiber and metal parts. 502 glue will cause serious corrosion to foam parts.

2.Please wait for the glue to dry and solidify in each installation step before the next ins tallation.

3.Please avoid using flame to heat the heat shrinkable tube on the model. Electric iron shall be

used for heating.

4.Please use razor blade to remove the parts from the plate. Do not tear the parts by force.

1. Fuselage internals

2. Bond the inner structure of the fuselage with 502 glue.

Please pay attention to the opening direction of the servo base.

3. Combined motor base, use 502 glue to fix the motor.

4. Use m1.2x6mm screw to fix the turnover motor base. Adjust the distance between the fixed

pieces on both sides of the motor base till the motor base can be turned over freely. If necessary,

sand the motor base to reduce its thickness to make the turning movement smooth.

5. Screw in another m1.2x6 screw from the right side to form the motor line limit to prevent the

motor line from interfering with the motor base movement or propeller running.

6.Connect the servos to a powered receiver. Bind the receiver with your transmitter to make the

servos return to their neutral point. Test whether the servos are working normally, and install the

servo arms according to the position shown in the picture. (use screws to fix the servos on the

servo base from the top.)

Note: Please make sure that the servos have been tested and installed in strict accordance with

the following picture. After assembling the model, it will be not able to adjus t.

7. Install the receiver. No glue is required here.

8.Connect the cable of servos and motor, and connect the receiver to power for test. Ensure that

the servos and motor work normally and the motor rotation direction is correct.

Secure the cable with ties.

Note: please make sure the motor rotation direction is correct. After the model is assembled, it

cannot be adjusted.

9. Combine the fuselage inner structure with the right panel of the fuselage.

Note: the bottom of inner structure (red circles) should be 2mm away from the edge.

10. Use the end of a carbon fiber rod to score through the half -cut line of the tail surface.

11. As shown in the figure, glue the fuselage side strips (and vertical tail) to the inside of the right

fuselage side panel in the order of A-B-C-D-E-F.

·The fuselage side strips are made of flexible material, which can be bent before bonding.

·In strict accordance with the A-B-C-D-E-F sequence installation, can ensure the accurate position

of the fuselage side strips.

·The fuselage side strips should be aligned with the fuselage side plate contour, which is helpful

to the model aesthetics.

12. The installation of fuselage side plate is completed, as shown in the figure.

Take 200 mm conduit and two duct seats for elevator drive.

13. As shown in the figure, paste a conduit seat inside the right side of the fuselage. The distance

between the seat and the conduit hole on the side plate is about 30mm.

14. As shown in the figure, paste a duct seat on the right side of the vertical tail. This guide

socket is used to fix the end of elevator drive pipe.

The blue curve in the figure shows the route of elevator conduit pipe and steel wire.

15. Glue the conduit to the conduit base inside the fuselage, and the two ends of the conduit pass

through the two conduit holes on the right side of the fuselage.

Left end of the guide pipe extends out of the fuselage by 5mm.

16. Glue the end of the duct to the duct seat on the vertical tail.

17. Install the duct on the left side of the fuselage as shown.

Take one 170mm conduit and one duct base.

Paste the duct base inside the left side of the fuselage, 30mm away from the duct hole.

18. Glue the conduit to the conduit base on the left side of the fuselage, both of the ends of the

conduit pass through the conduit hole.