MinimumRC A6M5-D Bedienungsanleitung

Andere MinimumRC Spielzeug Handbücher

MinimumRC

MinimumRC J-3 Bedienungsanleitung

MinimumRC

MinimumRC R-51 Mustang Bedienungsanleitung

MinimumRC

MinimumRC F4U Corsair Bedienungsanleitung

MinimumRC

MinimumRC P-51 Mustang Bedienungsanleitung

MinimumRC

MinimumRC T-28 Trojan Bedienungsanleitung

MinimumRC

MinimumRC Beech V-35 Bedienungsanleitung

MinimumRC

MinimumRC P40 Q Series Bedienungsanleitung

MinimumRC

MinimumRC Shrimp V2 Bedienungsanleitung

MinimumRC

MinimumRC DH-88 Comet Bedienungsanleitung

MinimumRC

MinimumRC LISA Bedienungsanleitung

MinimumRC

MinimumRC Spitfire Bedienungsanleitung

MinimumRC

MinimumRC P-51 Mustang Bedienungsanleitung

MinimumRC

MinimumRC F8F-RareBear Pro Bedienungsanleitung

MinimumRC

MinimumRC T-28 Trojan Bedienungsanleitung

MinimumRC

MinimumRC Cessna-152 Bedienungsanleitung

MinimumRC

MinimumRC Butterfly V1 Bedienungsanleitung

MinimumRC

MinimumRC Flycat Bedienungsanleitung

MinimumRC

MinimumRC Messerschmitt BF-109 Bedienungsanleitung

MinimumRC

MinimumRC Ju-87 Bedienungsanleitung

MinimumRC

MinimumRC F8F Rare Bear Handbuch

MinimumRC

MinimumRC T-34 Mentor Bedienungsanleitung

MinimumRC

MinimumRC Cessna L-19 Bedienungsanleitung

MinimumRC

MinimumRC T-34 Mentor Bedienungsanleitung

MinimumRC

MinimumRC NANCHANG CJ-6 Bedienungsanleitung

Beliebte Spielzeug Handbücher anderer Marken

marklin

marklin 37321 Bedienungsanleitung

Canon

Canon PAPER CRAFT Bedienungsanleitung

GREAT PLANES

GREAT PLANES Pitts M-12S Bedienungsanleitung

NOCH

NOCH 14261 Bedienungsanleitung

Hausler

Hausler 450 SE V2 Bedienungsanleitung

Dynaflite

Dynaflite Daydream Bedienungsanleitung

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Handbuch

Kenner

Kenner Batman 63651 Bedienungsanleitung

LEGO

LEGO 8527 Bedienungsanleitung

iKarus

iKarus ECO 8 Bedienungsanleitung

Multiplex

Multiplex EasyStar II Bedienungsanleitung

Walkera

Walkera 38 Bedienungsanleitung

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Bedienungsanleitung

MD

MD MXION SWD Bedienungsanleitung

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Bedienungsanleitung

marklin

marklin 39671 Bedienungsanleitung

Meccano

Meccano 15103 Bedienungsanleitung

LEGO

LEGO TECHNIC 8735 Bedienungsanleitung

A6M5-D

Assembly Instructions

Important notification

1.The model is supplied with UFO and 502 glue. UFO is for bonding foam parts, and 502 for

bonding wood, carbon fiber and metal parts. 502 glue will cause serious corrosion to foam parts.

2.Please wait for the glue to dry and solidify in each installation step before the next installation.

3.Please avoid using flame to heat the heat shrinkable tube on the model. Electric iron shall be

used for heating.

4.Please use razor blade to remove the parts from the plate. Do not tear the parts by force.

1. Fuselage internals.

2. Bond the inner structure of the fuselage with 502 glue.

3. Connect the servos to a powered receiver. Bind the receiver with your transmitter to make the

servos arms return to their neutral point. Test whether the servos are working normally, and

install the servo arms according to the position shown in the picture.

Note: Please make sure that the servos have been tested and installed in strict accordance w ith

the following picture. After assembling the model, it will be not able to adjust.

4. (bottom view) the three servos are installed and fixed under the plywood board.

5. Connect the receiver to the motor, install the propeller and test whether the rotation direction

of the motor is correct. If the motor is reversed, reverse the motor line.

Test whether the corresponding relationship between the three steering gears and th e transmitter

channel is correct (as shown in the figure).

After the test, fix the receiver with Velcro and tie the cable.

6. Install magnet base & magnet.

7. Align the scribed line on the inner side of the fuselage and fix the wooden s tructure with glue.

8. Remove the propeller.

Press the top plate and bottom plate of the fuselage and bend them into the corresponding

shape of the fuselage contour. Fix the top plate and bottom plate of the fuselage with glue.

Note: the position shown in the figure is the battery cover plate that can be opened and closed.

No glue shall be applied to the area marked by the red line.

9. Cut out the illustrated orange area on the sticker to avoid interference with the motor gears.

10.

11. Combine the fuselage.

12. Fix the battery cover magnet with glue and cover it with stickers.

13. The battery cover can be opened, and can be adsorbed in the closed position by magnet.

14. Paste the fuselage sticker and install the propeller.

15. Use the end of a carbon fiber rod to score through the half -cut line of the wing surface.

16.Use the end of a carbon fiber rod to score through the aileron half-cut line of the wing surface.

17. Use the end of a carbon fiber rod to score through the half -cut line of the tail surface.

18. Use the end of a carbon fiber rod to score through the half -cut line of the rudder surface.

19. Install the tail.

20. Attach the wings to the fuselage.

21.

22. Insert the copper axle core into the center of the wood wheel core.