Minolta DIMAGE SCAN ELITE 5400 Bedienungsanleitung

HARDWARE MANUALE

9222-2890-11 AV-A304/ME200304

2For proper and safe use

Read and understand all warnings and cautions before using this product.

WARNING

•Use only within the voltage range specified on the unit. Inappropriate current may cause

damage or injury through fire or electric shock.

•Use only the specified AC adapter (Ya Hsin Industrial 019-240840) within the voltage range

indicated on the adapter unit. An inappropriate adapter or current may cause damage or injury

through fire or electric shock.

•Do not disassemble this product. Electric shock may cause injury if a high-voltage circuit inside

the product is touched.Take the product to a Minolta Service Facility when repairs are required.

•Immediately unplug the unit and discontinue use if the product is dropped or subjected to an

impact in which the interior is exposed.The continued use of a damaged product may cause

injuries or fire.

•Store this product out of reach of children. Be careful when around children not to harm them

with the product or parts.

•Do not operate this product or handle the power cord with wet hands. Do not place a container

with liquid near the product. If liquid comes in contact with the product, immediately unplug the

unit.The continued use of a product exposed to a liquid may cause damage or injury through

fire or electric shock.

•Do not insert hands, inflammable objects, or metal objects such as paper clips or staples into

this product. It may cause damage or injury through fire or electric shock. Discontinue use if an

object enters the product.

•Do not use the product near inflammable gases or liquids such as gasoline, benzine, or paint

thinner. Do not use inflammable products such as alcohol, benzine, or paint thinner to clean the

product.The use of inflammable cleaners and solvents may cause an explosion or fire.

•When unplugging the unit, do not pull on the power cord. Hold the adapter unit when removing

it from an outlet.

•Do not damage, twist, modify, heat, or place heavy objects on the power cord. A damaged cord

may cause damage or injury through fire or electric shock.

•If the product emits a strange odor, heat, or smoke, discontinue use. Immediately unplug the

product.The continued use of a damaged product or part may cause injuries or fire.

•Take the product to a Minolta Service Facility when repairs are required.

CAUTION

•Damage or injury through fire or electric shock may result if the product is used or stored in the

following conditions:

In humid or dusty environments

In direct sunlight or hot environments

In smoky or oily areas

In unventilated areas

On unstable or unlevel surfaces

For proper and safe use

The sound pressure level is less than 70dB according to ISO 3744 or ISO 7779.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interfer-

ence received, including interference that may cause undesired

operation.

Tested by the Minolta Corporation 101 Williams Drive Ramsey,

New Jersey 07446 USA.

Do not remove the ferrite cores from the cables.

This mark certifies that this product meets the requirements of the EU (European

Union) concerning interference causing equipment regulations. CE stands for

Conformité Européenne.

As an Energy Star® Partner, Minolta has determined that this product meets the

Energy Star guidelines for energy efficiency.

Microsoft, Windows, Windows 98, Windows Me, Windows 2000 Professional, and Windows XP

are registered trademarks of the Microsoft Corporation. Macintosh, Apple, and Power Macintosh

are registered trademarks of Apple Computer, Inc. Adobe and Photoshop are registered trade-

marks of Adobe Systems Incorporated. CorelPhotoPaint is a trademark of the Corel Corporation.

Paint Shop Pro is the copyright of Met’s Corporation. Digital ICE3, Digital ICE, Digital ROC, and

Digital GEM are trademarks of registered trademarks and technologies of Applied Science Fiction,

Inc in U. S. A. Other corporate and product names are the trademarks and registered trademarks

of their respective companies.

•This product should only be operated in the upright position. Inappropriate placement may result

in fire.

•Insert the plug securely into the electrical outlet.

•Do not use if the cord is damaged.

•Do not connect the ground to a gas pipe, telephone ground, or water pipe. Improper grounding

can result in injury from electric shock.

•Do not cover the AC adapter. A fire may result.

•Do not obstruct access to the AC adapter; this can hinder the unplugging of the unit in

emergencies.

•Unplug the product when cleaning or when the unit is not in use for long periods.

•Periodically check that the power cord is not damaged and the plug is clean. Dust and dirt that

may collect between the prongs of the plugs may result in fire.

Every necessary precaution has been taken to ensure the accuracy of this instruction manual.

Minolta is not responsible for any loss or damage caused from the operation of this product.This

manual may not be copied in part or whole without prior written permission from Minolta.

Thank you for purchasing this Minolta product. Please take the time to read through this instruc-

tion manual so you can enjoy all the features of your new scanner.

Check the packing list before using this product. If any items are missing, immediately contact

your dealer.

DiMAGE Scan Elite 5400 scanner

Scanner Stand

Slide Mount Holder SH-M10

35mm Film Holder FH-M10

USB Cable UC-2

IEEE1394 Cable FC-2

AC Adapter

Reset Tool

DiMAGE Scan Utility CD-ROM

Adobe Photoshop Elements 2.0 CD-ROM

DiMAGE Instruction Manuals-CD-ROM:

DiMAGE Scan Elite 5400 hardware instruction manual (PDF)

DiMAGE Scan software instruction manual (PDF)

Quick Reference Guide

Minolta International Warranty Certificate

The AC adapter unit varies with region. AC-U25 is for use in North America, Taiwan, and Japan.

AC-U22 is for use in continental Europe, Oceania, and Asia (except China and Hong Kong). AC-

U23 is for use in the United Kingdom and Hong Kong. AC-U24 is for China.

Before you begin

4Before you begin

System requirements........................................................................................6
Names of parts ................................................................................................7
Scanner setup ..................................................................................................7
Attaching the scanner stand ..................................................................7
Before connecting the scanner to a computer ......................................8
Connecting the USB cable ....................................................................8
Connecting the IEEE 1394 (FireWire) cable ..........................................9
Connecting the AC adapter....................................................................9
Turning on the scanner ..........................................................................9
Loading the film holders ................................................................................10
Handling film ........................................................................................10
Where is the emulsion?........................................................................10
Loading 35mm film strips ....................................................................10
Loading mounted slides........................................................................11
Loading a film holder into the scanner ................................................12
Ejecting a film holder............................................................................12
Scanner notes ................................................................................................13
Compatibility with the DiMAGE Scan Utility ........................................13
Film format and type settings ..............................................................13
Scanner resolution................................................................................13
Scanner color profiles ..........................................................................13
The Quick Scan button and DiMAGE Scan Launcher..........................14
Pixel Polish system requirements ........................................................15
Manual focus dial..................................................................................16
Digital ICE system requirements..........................................................17
Adobe Photoshop Elements ................................................................17
Job file list ............................................................................................18
Disconnecting the scanner ..................................................................19
Troubleshooting ..............................................................................................20
Checking software installation - Windows............................................21
Closing the scanner door ....................................................................22
Technical support..................................................................................22
Warranty and product registration........................................................22
Technical specifications ..................................................................................23
This manual contains information specific to this model scanner.This includes hardware setup
and use as well as notes about software operation, compatibility, and system requirements. See
the supplied DiMAGE Scan Utility software manual for information on the installation and opera-
tion of the scanner software.
Table of contents
5

System requirements

6System requirements

600MB or more of available hard-disk space is required.

IEEE1394 (FireWire) or preinstalled USB (ver. 2.0 or 1.1) interface

* To use preinstalled Mac OS 8.6 with a built-in FireWire port, a Firewire 2.2 to 2.3.3 extension

must be installed.This software can be downloaded free of charge from the apple web site at

http://www.apple.com.

Check the Minolta web site for the latest compatibility information:

North America: http://www.minoltausa.com

Europe: http://www.minoltasupport.com

TWAIN driver compatible with

Photoshop 6.0.1, and 7.0.1,

Photoshop Elements 2.0,

Paint Shop Pro 7.0, CorelPhotoPaint 11.0.

Recommended IEEE boards

Adaptec FireConnect 4300,

PROCOMP SpeedDemon 400P, or

OHCI compatible non-DV dedicated

IEEE1394 ports guarantied by the computer

manufacturer.

Recommended USB boards

Adaptec USB2connect 3100, Adaptec

USB2connect 5100, Adaptec DuoConnect,

Belkin Hi-speed USB 2.0 5-Port PCI, Belkin

Hi-speed USB 2.0 2-Port PCI, or port sup-

plied with the computer.

800 X 600 monitor capable of displaying High

Color (16 bit) is required.

1024 x 768 monitor is recommended.

A minimum of 128MB of RAM.

USB: Windows 98, 98 Second Edition,

2000 Professional, Me, or XP.

IEEE 1394: Windows 2000 Professional,

Me, or XP

Pentium 166 Mhz or later processor.

Pentium III or later recommended.

Plug-in compatible with

Photoshop 6.0.1, and 7.0.1,

Photoshop Elements 2.0,

Apple FireWire or USB port

800 X 600 monitor capable of displaying at

least 32,000 colors is required.

1024 x 768 monitor is recommended.

A minimum of 128MB of RAM in addition to

the requirements for the Mac OS and appli-

cations.

USB: Mac OS 8.6 to 9.2.2

and Mac OS 10.1.3 to 10.1.5

and 10.2.1 to 10.2.3

FireWire: Mac OS 8.6* to 9.2.2 and

Mac OS 10.2.1 to 10.2.3

PowerPC G3 or later.

PowerPC G4 or later recommended.

The computer and the operating system must be guarantied by the manufacturer to support IEEE

1394 (FireWire), or USB interface.To use the scanner, your computer system must meet the fol-

lowing requirements:

Names of parts

IEEE 1394 port

USB port

DC terminal

Front door

Power switch

Indicator lamp

Eject button

Quick Scan button

Focus dial

Scanner setup

Attaching the scanner stand

A scanner stand has been supplied for added stability.

Simply place the scanner in the stand.The feet on the

bottom of the scanner unit should not rest on the

stand.

Do not use the focus dial until is has been activated in the DiMAGE Scan Utility’s preferences dia-

log box. See the DiMAGE Scan software manual for details.

Securely plug the A connector of the USB cable into the scanner’s USB

port and the B connector into the computer’s USB port.

The scanner should be connected directly to the computer. Attaching the

scanner to a USB hub may prevent proper operation.

8Scanner setup

Before connecting the scanner to a computer, the DiMAGE Scan Utility must first be

installed. Read the software instruction manual for the installation procedure.

The scanner should be placed on a level surface free from vibrations. It should be

located away from direct sunlight and in a clean, dry, well-ventilated area. Never connect the

scanner cable while data is being transferred between the computer and peripheral devices.

Before connecting the scanner to a computer

Connecting the USB cable

When the scanner is initially connected to a computer with a Windows 98, 98SE, or 2000

Professional operating system, the found-new-hardware wizard will appear briefly. No action is

required.With Windows 2000, the “Digital Signature Not Found…” message may appear. Click the

yes button to complete the scanner installation.

When the scanner is initially connected to a computer with a Windows XP operating system, the

found-new-hardware wizard will appear. Click the next button.The “not passed Windows Logo

testing” message appears. Click the continue-anyway button to complete the scanner installation.

1. Connect the output plug of the AC adapter to the

scanner’s DC terminal.

2. Plug the AC adapter into a standard household outlet.

Connecting the AC adapter

Turn on the scanner with the power switch. Start up the

computer.

When launching the DiMAGE Scan Utility, the indicator lamp

will blink when the scanner is initializing. Once the indicator

lamp glows steadily, the scanner can be used.

When using an IEEE1394 interface with Windows Me,

always shut down the computer before turning the scanner

off. Otherwise a system error may result.

Turning on the scanner

Power switch

Indicator lamp

Connecting the IEEE 1394 (FireWire) cable

Securely plug the cable into the scanner’s and computer’s IEEE 1394 port. Either

end of the cable can be connected to the IEEE 1394 port on the scanner or com-

puter.

The scanner should be connected directly to the computer. Attaching the scanner

to an IEEE hub may prevent proper operation.

When the scanner is initially connected to a computer with a

Windows 98, 98SE, or 2000 Professional operating system, the

found-new-hardware wizard will appear briefly. No action is

required.With Windows 2000, the “Digital Signature Not Found…”

message may appear. Click the yes button to complete the scan-

ner installation.

When the scanner is initially connected to a computer with a Windows XP operating system, the

found-new-hardware wizard will appear. Click the next button.The “not passed Windows Logo

testing” message appears. Click the continue-anyway button to complete the scanner installation.

10 Loading the film holders

Handling film

Where is the emulsion?

To achieve the best possible reproduction from the scanner, the film and film holder should be

free from dust and dirt. Always work with processed film in a clean, dust-free environment. Handle

film by the edges or mount to prevent fingerprints and dirt marring the image area. Special lint

free gloves are available from photographic equipment retailers for film handling as well as anti-

static cloths, brushes, and blowers for removing dust. Film cleaner can be used to remove oil,

grease, or dirt from film; carefully follow the manufacturer's instructions and precautions for the

film cleaning solvent.

When film is scanned, the emulsion side of the film should be down.When viewing the film image,

if the image is orientated correctly rather than a mirror image, the emulsion side is facing down. If

the image is abstract or symmetrical so its orientation is difficult to determine, the emulsion is

down if the frame numbers and edge markings can be read correctly. With mounted slides, the

emulsion is on the same side of the mount as the film manufacturer's or processor’s name is

printed.

Film strips of up to six frames can be

loaded into the FH-M10 film holder.To

open the holder, lift the latch and open

the cover (1).

With the emulsion down, place the film

in the holder and under the retaining

tabs. Align the film with the frame

apertures.The up arrow on the the

film holder indicates the orientation

of horizontal images.

Loading 35mm film strips

Loading the film holders

Carefully lower the cover until the latch clicks into

place.Take care not to move the film during this operation.

Andere Handbücher für DIMAGE SCAN ELITE 5400

Inhaltsverzeichnis

Andere Minolta Scanner Handbücher

Minolta

Minolta DIMAGE SCAN DUAL III Bedienungsanleitung

Minolta

Minolta Dimage Scan Scan Elite I Bedienungsanleitung

Minolta

Minolta PS7000 Bedienungsanleitung

Minolta

Minolta MS 6000 Bedienungsanleitung

Minolta

Minolta DIMAGE SCAN ELITE 5400 Bedienungsanleitung

Minolta

Minolta PS7000 Bedienungsanleitung

Minolta

Minolta Dimage Scan Elite F-2900 Bedienungsanleitung

Minolta

Minolta DiMAGE Scan Multi PRO AF-5000 Bedienungsanleitung

Minolta

Minolta Film Scanner II Bedienungsanleitung

Minolta

Minolta Dimage Scan Multi Bedienungsanleitung

Minolta

Minolta Dimage Scan Multi Montageanleitung

Minolta

Minolta DIMAGE SCAN DUAL II AF-2820U Bedienungsanleitung

Minolta

Minolta Dimage Scan Multi Bedienungsanleitung

Minolta

Minolta Dimage Scan Dual2 AF-2820U Bedienungsanleitung

Minolta

Minolta QuickScan 35 Bedienungsanleitung

Minolta

Minolta SC-100 Bedienungsanleitung

Minolta

Minolta Dimage Scan Elite II Bedienungsanleitung

Minolta

Minolta QUICKSCAN35 Bedienungsanleitung

Minolta

Minolta DIMAGE SCAN MULTI PRO Bedienungsanleitung

Minolta

Minolta Scanner Mode Bedienungsanleitung

Minolta

Minolta DIMAGE SCAN SPEED Bedienungsanleitung

Minolta

Minolta Dimage Scan Multi Bedienungsanleitung

Minolta

Minolta Dimage Scan Elite II Bedienungsanleitung

Minolta

Minolta DiMAGE Scan Multi PROAF-5000 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung