Mixcder E7 Bedienungsanleitung

User’s Manual

Wireless Headphone

MODEL:E7

2. Package Contents

3. Product Overview

1. Introduction

Thank you for purchasing the Mixcder E7 Active Noise

Canceling Wireless Headphone. Mixcder E7 active noise

canceling technology monitors the noise around you and

cancels it out for travel, work and anywhere in between,

helping you focus on what you want to hear. E7 has

fashionable appearance and eco-friendly package design.

Built-in rechargeable battery provides more music playing

and standby time. It’s engineered to sound better, be more

comfortable and easy to carry.

E7 can be used both wired and wireless via Wireless V4.0

to communicate with your Wireless-enabled device till 10

meters range. Its powerful and rich bass speaker brings

you amazing and unprecedented audio enjoyment.

Note: Please read the user’s manual carefully before using,

and keep it properly for future reference.

- Wireless headphone*1

- Micro USB charging cable*1

- 3.5mm audio cable*1

- User’s manual*1

- Compact carrying case*1

- Warranty card*1

EN-1

8/9

4. Charging the Battery

Use the supplied micro USB charging cable to recharge the

battery. It takes about 2 hours for the first charge and after

charging for as long as 1-1.5 hours. The headphone LED

turns to solid red during charging. When the battery is fully

charged the LED turns off.

You can also use the Wireless function during charging but

will extend the charging time. If you use the audio cable or

turn the headphone off for charging that will not affect the

charging time.

When the battery is low, the LED flashes red light. At the

same time the headphone also provides a low battery

warning tone.

Note: It is strongly recommended fully charging for the first

use. Playtime varies according to volume level and audio

content .

1.Microphone

2.3.5mm line-in jack

3.Power button

4.Previous track/V-

5.Next track/V+

6.LED Indicator/Charging LED

7.Micro USB interface for charging

8.Noise canceling LED indicator

9.Noise canceling on/off

10.Micro USB Charging Cable

11.3.5mm Audio Cable

EN-2

10 11

5.Pairing with Wireless Devices

5-1 Pairing the headphones with a computer

Before pairing the headphone with your computer, please

make sure your computer or laptop has the built-in Wireless

feature. If not, you must purchase a Wireless dongle,

preferably version 2.1 or above.

1.Make sure the headphone is off.

2.Start the Wireless program in the computer.

3.The “Search new device” screen will be displayed.

4.Do not place both devices more than one meter away

from each other.

5.Press and hold the power button on the headphone until

it powers on but don't let go just yet. Continue holding down

on the power button until you see the LED indicator flashes

blue and red alternately, which means your headphone is in

"pairing mode" waiting to be paired with your device. You

will hear a prompt.

6.As soon as the computer system detects the new device

and select “Mixcder E7". Once successfully paired, the LED

turns to solid blue. You will hear a prompt.

5-2 Pairing the headphone with a phone

1.Make sure the headphone is off.

2.Do not place both devices more than one meter away

from each other.

EN-3

Micro USB charging cable to the USB Interface for charging

EN-4

3.Press and hold the power button on the headphone until

it powers on but don't let go just yet. Continue holding

down on the power button until you see the LED indicator

flashes blue and red alternately, which means your

headphone is in "pairing mode"waiting to be paired with

your device. You will hear a prompt.

4.Start Wireless function on your phone and search for new

devices.

5.Select the “Mixcder E7” to pair. Once successfully paired,

the LED turns to solid blue. You will hear a prompt.

5-3 Connecting to paired devices

Mixcder E7 will pair with the last paired device automati-

cally when turning on. Because of different systems, some

computers or laptops may need to be manually paired

every time.

6. Active Noise Canceling

Mixcder E7 contains a noise canceling circuit, Noise mainly in

an airplane, buses or trains is effectively reduced.

1).The noise canceling effect may not be pronounced in a very

quiet environment, or some noise may be heard.

2).The noise canceling effect may vary depending on how you

wear the headphones.

3).The noise canceling function works for noise in the low

frequency band primarily. Although noise is reduced, it is not

canceled completely.

4).When you use the headphones in a train or a car, noise

may occur depending on street conditions.

EN-5

8. Using a Wired Headphone

7. Making and Answering a Call

7-1 Making a call

The E7 provides a 3.5mm audio jack located on the side of ear

cup and an included audio cable for wired use.

This allows you to use the audio function with other devices

without having wireless function. When the headphone's

battery is low, you can still enjoy the music without worrying

battery dead.

Note: The microphone can't work when using as wired

headphone.

1.Make sure the headphone is pairing to the mobile phone.

Dial through the mobile phone and press the call button on the

phone.

2.To end a call, press the power button once again or also end

the call directly by the phone.

7-2 Answering a call

Make sure the Headphone is pairing with your phone. Please

refer to chapter 5. Pairing with Wireless devices.

1.When a call is incoming. The LED flashes red, then keeps in

solid blue.

2.Press the power button on your headphone or the answer

button on your phone to answer the call. If there is the music

playback, it will pause.

3.To end a call, press the power button once again or also end

the call directly by the phone.

4.As soon as the call is ended, the music will continue to play

automatically.

EN-6

9. Take Care Your Headphone

-Store the Headphone with power off and in a dry

environment.

-If you don’t use the headphone for a long period, charging the

battery every 2 months for 1-2 hours.

-Use a dry cloth for cleaning if needed.

-Avoid dropping the headphone from high places or on hard

surfaces.

-Avoid exposing the headphone to extreme temperature.

(Recommended Storage temperature is -40˚C-80˚C.)

-The headphone is NOT waterproof. Avoid exposing the

headphone to rain or getting liquids into any button port or

other openings.

-Please don’t twist or bend the headphone. This may cause

permanent deformation.

-The built-in battery can’t be disposed in the fire to avoid

explosion.

Avoid exposing to

liquids and rain

Avoid exposing to

extremely temperature

Avoid dropping

from high places

Using as a wired headphone

with a 3.5mm audio cable

EN-7

10. Protecting your Hearing

The Headphone is held close to your ears, so loud sounds

pose a potential hearing risk. It is highly recommended that

setting low volume level before putting on the headphone

and avoiding exposing yourself continuously to high

volumes. If you need to use the headphone for a long

period, rest ten minutes for a half hour using.

11. Control Instructions

Function Operation

Play media Press the power button

End a call Press the power button

Power on When the headphone is off, press and hold the power

button 3 seconds, and the LED flashes blue and

sounds a prompt.

Answer a call Press the power button to answer the call.

Power off When the headphone is on, press and hold the power button

3 seconds, and the LED flashes red and sounds a prompt..

When the headphone is on, press and hold the power button

3 seconds, and the LED flashes red and sounds a prompt..

Pause/restart

media playback Press the power button

Increase

volume Press the Volume Up V+ button

Decrease

volume Press the Volume Down V- button

Skip to next

track Press and hold the V+ button for 1-2s

Skip to previous

track Press and hold the V- button for 1-2s

Noise Canceling

On Press the Noise-Canceling Button to ON, Blue LED

light on.

Noise Canceling

Off Press the Noise-Canceling Button to OFF, Blue LED

light off

Play media Press the power button

End a call When a call is ended, press the power button

Answer a call When a call rings, press the power button

Pause/restart

media playback Press the power button

Increase

volume Press the Volume Up V+ button

Increase

volume

Decrease

volume Press the Volume Down V- button

Skip to next

track Press and hold the V+ button for 1-2s

Skip to previous

track Press and hold the V- button for 1-2s

Noise Canceling

On Push the Noise-Canceling Button to ON, Blue LED light

on.

Noise Canceling

Off Push the Noise-Canceling Button to OFF, Blue LED

light off

Pairing Press and hold the power button about 5 seconds, then the

LED flashes in red and blue, the voice will prompt.

EN-8

12. Troubleshooting

Q: The headphone cannot be turned on.

A: The battery may be flat. Please recharge the battery and

try again. Refer to chapter 4. Charging the Battery.

Q: Why doesn’t the headphone pair with the mobile phone?

A: Please check the followings.

-Check that the headphone is charged and is in pairing

mode.

-Make sure that the mobile phone's Wireless function is on.

-Make sure the two devices are in the effective pairing

range. (10 meters).

-Make sure that there is no obstacle between the

headphone and the mobile phone, such as electronic

equipment and a wall.

-Furthermore, you can try restarting the headphone and

pairing it with the mobile phone again.

-Make sure the paired device’s wireless function is turned

off.

Q: There is some noise.

-A: Wireless is a radio technology, so it is sensitive to

obstacles between the headphone and the pairing device.

Please make sure that there is no obstacle between the two

devices and is within 10 meters.

Q: I can't hear sound.

A: Please check the followings.

Note:

There will be a alert tone when the volume reaches the

maximum level.

EN-9

13. Warranty

The E7 is covered by a 1-year manufacturer warranty. For

more information,

visit: www.mixcder.com/Support/Warranty.html

-Try increase the volume.

-Make sure that the Wireless function is on and whether the

two devices are connecting and within 10 meters.

Q: My mobile phone or computer cannot find the headphone.

A: Please check that the headphone is in pairing mode.

Refer to chapter 5. Pairing with Wireless devices.

Sometimes when the headphone is connected too many

Wireless devices, it cannot search and pair effectively. Or

your mobile phone and computer are already connected to

many other devices. Try removing some connections

before searching the headphone.

Andere Handbücher für E7

Inhaltsverzeichnis

Sprachen:

Beliebte Andere Handbücher anderer Marken

GO Industries

GO Industries 38017 Bedienungsanleitung

Cissell

Cissell 30LBCMAN2 Bedienungsanleitung

RIDGID

RIDGID K-60SP Bedienungsanleitung

Gage Bilt

Gage Bilt GB751SH-5 Bedienungsanleitung

OVE

OVE SIERRA 60 Bedienungsanleitung

ReelCraft

ReelCraft 7800 OLB21 Bedienungsanleitung

Body Armor 4x4

Body Armor 4x4 ECO-SERIES Bedienungsanleitung

ROBLIN

ROBLIN DROP Benutzerhandbuch

EMG

EMG EMG-ACB BARREL Service-Handbuch

MiniSolar

MiniSolar MT-150 Bedienungsanleitung

Parkside

Parkside PSZ 250 B2 Bedienungsanleitung

ABB

ABB REM 610 Produkthandbuch

Parkside

Parkside 55992 Betriebsanleitung

Skyjacker

Skyjacker F250 Bedienungsanleitung

IBM

IBM IBM SYSTEM Z Installationsanleitung

Grech Motors

Grech Motors G28 Bedienungsanleitung

NOVAK

NOVAK BATTERY CARE SHEET Leitfaden

Telemotive

Telemotive blue PiraT Mini Benutzerhandbuch