Monoprice 43021 Bedienungsanleitung
34" WQHD Monitor
Desktop Monitor with
Height Adjustable Stand
P/N 43021
User's Manual
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these
safety warnings and guidelines. Please keep this manual in a safe place for future reference.
-This monitor is intended for indoor use only.
-Do not expose this monitor to water or moisture of any kind. Do not place drinks or
other containers with moisture on or near the device. If moisture does get in or on
the device, immediately unplug it from the power outlet and allow it to fully dry
before reapplying power.
-Do not touch the monitor, the power cord, or any other connected cables with wet
hands.
-Do not place the monitor on an unstable surface where it could fall and cause either
personal injury or damage to the monitor and/or other equipment.
-Do not subject the monitor to extreme force, shock, or fluctuations in temperature
or humidity.
-Do not block the ventilation holes in the monitor's casing. Do not place the monitor
in a confined space with inadequate ventilation. Periodically check the ventilation
holes to ensure they do not become clogged with dust, debris, or nearby items.
-Do not place the monitor near a heat source, such as a fireplace, heating vent,
radiator, etc.
-Do not place or install this monitor in an area where it can be exposed to excessive
amounts of dust, humidity, oil, smoke, or combustible vapors.
-Prior to operation, check the monitor and power cord for physical damage. Do not
use if physical damage has occurred.
-Unplug this monitor from the power source when not in use.
-Take care to prevent damage to the power cord. Do not allow it to become
crimped, pinched, walked on, or become tangled with other cords. Ensure that the
power cord does not present a tripping hazard.
-Never unplug the monitor by pulling on the power cord. Always grasp the
connector head or adapter body.
1
-Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
-This monitor has no user serviceable parts. Do not open the case or otherwise
attempt to modify this monitor.
-Do not leave a single image on the display for a long period of time. Doing so could
cause "burn-in" of the image. It is recommended to use a variable desktop
background and to use a screen saver to prevent "burn-in". Alternatively, ensure
that the monitor is powered st 2 hours out of every 12.
-
PACKAGE CONTENTS
1 x 34” Monitor
-1x Base
-1x Stand
-1x Thank You Card and User Manual
-1x Power Cable、1xAdapter
-1x HDMI Cable
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering,
purchasing, and delivery experience is second to none. If you have any problem with your
order, please give us an opportunity to make it right. You can contact a Monoprice
Customer Service representative through the Live Chat link on our website
www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-
2
USING THE KENSINGTON LOCK
The Kensington security connector is located on the back side of the
monitor. For more information on installation and usage please visit
the Kensington website at http://www. kensington.com.
Below is an example of setting up the Kensington lock on a table for
your reference.
*This picture is for reference only
3
4
Perform the following steps to prepare your monitor for use.
1. Either assemble the stand and attach it to the rear of the monitor or mount the
monitor to a wall or desk mount.
2. Plug one end of the included HDMI cable into one of the HDMl inputs on the
monitor,then plug the other end into the HDMl video output on your computer.
Alternatively,you can connect using a DisplayPort/ Type-C Cable(not included).
3.(Optional) Plug a pair of headphones or powered speakers into the audio
output on the monitor.
4. The power cord AC plug connection adapter,the adapter DC plug connection
monitor, power plug connected power supply.The LED power indicator on the
monitor will illuminate orange.
*This picture is for reference only
5
POWER ON
Turn On LCD Monitor and Computer
Turn ON the LCD Monitor, then turn ON the computer. This
particular order (LCD monitor before computer) is important.
6
ADJUSTING THE SCREEN IMAGE
SETTING THE TIMING MODE
Set your monitor resolution to its recommended resolution (see
section "specification") to get the best experience possible, with
brilliant color and crisp text. Here is how:
1. Go to your display resolution settings window (each operating
system will have a different process to get there).
2. Next, adjust the display resolution setting to match your
monitor’s native resolution. This will provide you with your best
usage experience.
If you have difficulty setting the resolution or you do not see
recommended resolution as an available option, you may need
a newer video card driver. Contact your computer or video card
manufacturer to obtain the latest driver.
• If necessary, make small adjustments using H. POSITION and
V. POSITION until the screen image is completely visible. (*for
analog only). (The black border around the edge of the screen
should barely touch the illuminated “active area” of the LCD
monitor.)
7
USING THE CONTROL PANEL
After setting the timing mode, use the buttons on the Front or
rear control panel to display and adjust OSD for screen image
adjustment.
* The postition refer to section 2.2
Front & OSD symbol explanation
The symbol explanation is stated below:
NOTE: Power light
Blue = ON
Orange = Power Saving
Toggles between the various input options that are available for
that particular monitor.
Main menu icon that allows users to access the main menu.
8
13
The OSD Menu and OSD Quick-Menu Symbol explanations and
their functional uses are stated below.
Activation symbol to turn the various modes on when operating
the menu system.
Activation symbol to exit, go back or deactivate the desired
function that is selected.
Scrolls through menu options and adjusts the monitor controls.
Symbol used to go back or revert back to the previously
selected menu
Main menu icon that allows users to access the main menu.
Hold down the icon for a few seconds to turn off the main menu
Left and right icons toggle your selected choice horizontally.
9
14
OSD MENU INTRODUCTION
OSD MENU TREE
For an explanation of the OSD tree and pertaining functions, please
refer to the 4-1 OSD explanation below. The OSD tree visually
represents the complete OSD menu that can be accessed by your
monitor. If you aren’t sure where an option/function is or cannot
locate a specific feature, please utilize the OSD tree below.
View Mode
Input Select
Main Menu
Exit
Andere Handbücher für 43021
1
Inhaltsverzeichnis
Andere Monoprice Monitor Handbücher
Monoprice
Monoprice 27" CrystalPro WQHD Bedienungsanleitung
Monoprice
Monoprice 30602 Bedienungsanleitung
Monoprice
Monoprice 43020 Bedienungsanleitung
Monoprice
Monoprice 31006 Bedienungsanleitung
Monoprice
Monoprice 12077 Bedienungsanleitung
Monoprice
Monoprice 38035 Bedienungsanleitung
Monoprice
Monoprice 10509 Bedienungsanleitung
Monoprice
Monoprice 37923 Bedienungsanleitung
Monoprice
Monoprice 34711 Bedienungsanleitung
Monoprice
Monoprice 27772 Bedienungsanleitung
Monoprice
Monoprice 31005 Bedienungsanleitung
Monoprice
Monoprice 10734 Bedienungsanleitung
Monoprice
Monoprice 38576 Bedienungsanleitung
Monoprice
Monoprice 24657 Bedienungsanleitung
Monoprice
Monoprice 18545 Bedienungsanleitung
Monoprice
Monoprice Dark Matter 40778 Bedienungsanleitung
Monoprice
Monoprice 37924 Bedienungsanleitung
Monoprice
Monoprice DARK MATTER 45548 Bedienungsanleitung
Monoprice
Monoprice DARK MATTER 44710 Bedienungsanleitung
Monoprice
Monoprice 30618 Bedienungsanleitung
