Monte Carlo Fan Company 5vsr44XXd-l series Bedienungsanleitung

Ceiling Fan Installation Instructions

68%"!''"-81-9)59

!"%#""#!$#"

Total fan weight

&!@"

$

59:)33=1:068

=1:06;::0-31/0:21:

Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes ANSI/NFPA 70-1999),

including fire-rated construction.

Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.

After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding con-

ductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from

being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device,

such as a tag, to the service panel.

Be cautious! read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams.

When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7

feet from the floor to the trailing edge of the blade.

To reduce the risk of fire, electric shock, or personal injury, mount to outlet box or supporting system acceptable for fan support and

use only the screws provided with the outlet box. (Mounting must support at least 35 lbs.)

Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating

blades.

Attach the mounting bracket using only the hardware supplied with the outlet box.

To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control.

The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heat-

ing equipment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA),

and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being

switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such

as a tag, to the service panel.

Air flow direction: warm weather-switch to left - forward / cool weather -switch to right - reverse

10.

11.

12.

13.

14.

WARNING: TO REDUCE THE RISK OF FIRE, E ECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FO OWING: READ AND SAVE THESE INSTRUCTIONS

"#( #"

#" ! $!

Phillips Screwdriver Wire Cutters Pliers Step adder

Before you begin installing the fan, Switch

power off at Service panel and lock service dis-

connecting means to prevent power from being

switched on accidentally. When the service dis-

connecting means cannot be locked, securely

fasten a prominent warning device, such as a

tag, to the service panel.

Before installing this fan make sure the outlet box is

properly installed to the house structure. To reduce

the risk of fire, electric shock, or personal injury,

mount to outlet box or supporting system acceptable

for fan support. (Mounting must support at least 35

lbs.)



Installation

Use metal outlet box suitable for fan support

and use only the screws provided with the out-

let box (must support 35 lbs). Before attaching

fan to outlet box, ensure the outlet box is

securely fastened by at least two points to a

structural ceiling member ( a loose box will

cause the fan to wobble). $9-653?:0-

9+8-=9786<1,-,=1:0:0-6;:3-:*6>



Uninstall the flywheel by removing

the set screws. Save the screws for

use later.

Remove the rubber ring and discard

it.



Place the flywheel back and fix it by

the screws removed from step 4.

Tighten the 5 screws securely.



For Canadian installation in both flush and down-

rod mode the safety cable must be installed into

the house structure beams using the 3” lag screws

provided. Make sure that when the safety cable is

fully extended the leadwires are longer than the

cable and no stress is placed on the leadwires.

Hang assembled fan from the mounting bracket

installed to ceiling in previous step. Make sure the

fan is hanging straight. Rotate fan until the tab on

the Mounting bracket engages the slot on the

Downrod Ball. This must be done to prevent the fan

body from rotating when the blades are in motion.

 

Make wire connections to power source using wire nuts

provided. Make sure that no filiments are outside of

the wirenut. After making the wire connections, the

wires should be spread apart with the grounded con-

ductor and the equipment-grounding conductor on one

side of the outlet box and ungrounded conductor on

the other side of the outlet box.

Canadian mounting only

Safety Cable

ag Screw



ag Screw

Washer

ock Washer

Safety Cable

Place blade holders onto blades aligning holes

in blade holder with holes in blade. Make sure

that the side of the blade you select is facing

downward. Install 3 screws and fiber wash-

ers to back side of blade as shown. Tighten

screws securely. Repeat this process 4 more

times until all blades are assembled.



Set dip switches on the Remote Transmitter and Remote

Receiver to the same settings. This must be done so the

units will communcate properly. If you have other fans you

can set to control from one transmitter by setting both

receivers the same as the transmitter. If you have more

than one fan with remote. You can set the dip switches to

different positiosns to have seperate control.

Remote Transmitter Dip swtiches

Remote Receiver Dip switches



Install remote receiver into the

mounting bracket.



Ready for wiring.



white

black

Make wiring connections as indicated above.

White from fan to white from remote marked

N. Blue from fan to blue from remote marked

light. Black from fan to Black from remote

marked . White from house to white from

remote marked AC N . Black from house to

Black from remote marked AC . Connect all

green ground wires to Ground wire from

House.

blue

Green

white

black

House

Fan



fuses

ift canopy and install knurled nuts as

shown. Tighten the knurled nuts securely.

The canopy should adjust for any irregu-

larity in the ceiling or Outlet box.



oosen the 2 set screws in yoke for

downrod to slip into yoke. Insert

downrod into yoke on top of the Fan

Body. Align the hole in the Downrod

with the hole in the Yoke. Insert the

Pin through the Yoke and Downrod

until the point appears on the other

side. Install the Keeper Pin

Tighten the 2 Set screws on the Yoke

once the downrod is in place.



Yoke

Cross Pin

Keeper

Thread canopy and yoke cover on down-

rod, Thread leadwires and safety cable

through the downrod. Follow inserts as

shown above.

Canopy Yoke cover

6=586,

)33

Install the light kit plate to the motor

by twisting clockwise and install the

screw removed from step 22 to the

light kit plate. Tighten the 3 screws

securely.



oosen 2 screws and remove 1 screw

from the light kit plate, save the

screw removed for later use.



Install the fitter to the light kit plate

by twisting clockwise, add 1 screw

removed from step 24 and tighten

the screws securely.



Remove the finial cap, hex nut, and

rubber pad from the fitter.



Place the glass onto the fitter as

shown.



Connect white wire from fan to white

wire from light fixture. Then plug

blue wire from fan to black wire from

light fixture by pushing together the

connectors.



Install 2 x60 watt Candelabra base

bulbs. Bulbs included. &!

<-83)4715/:0-.)5=133

8-9;3:15:0-.)531/0:990;::15/

,6=5;5:13:0-7867-8=)::)/-

6.*;3*9)8-159:)33-, !-9-::0-

31/0:9*?:;8515/6..:0-=)33

9=1:+0*8-)2-868*?8-46:-

!-73)+-*;3*9=1:0:0-+688-+:

=)::)/-*;3*9:;85:0-76=-865



Install the no light cover by using the

3 hex nut screws provided.

Use the hex nut driver to tighten the

3 hex nut screws.



oosen the 2 screws and remove 1

screw from the motor. Save the

removed screw for later use.



Remove 2 cardboards pre-installed

into the fan body. Install blades to

motor using the motor screws pro-

vided. Tighten screws and washers

by using the hex-nut driver provided.

 68159:)33):165=1:0

31/0:21:/6:69:-7



68159:)33):165

=1:06;:31/0:21:/6

:69:-7

Remove 3 screws from the motor.

Save the removed screws for later

use with light kit.



Place face plate over battery compartment and

buttons. Place remote over 2 pins on front

cover. Attach cover of remote by placing over 4

pins and snapping into place.

 HAND HE D INSTA

Install wall control unit to outlet box

using machine screws provided.

 WA MOUNT INSTA

Attach front cover to wall control

with screws provided. Snap battery

cover in place.



Install the rubber pad and hex

nut onto the threaded rod secur-

ing the glass.



Install the decorative finial nut to the

threaded rod by screwing on

securely.



Remove cover by snaping off from top or bot-

tom. Remove battery cover. Install 12V battery

into wall remote. Duracell MN21 / Eveready A23

/ GP 23A all 12V.Attach cover of remote by plac-

ing over buttons and snap the battery cover in

place.



!-46:-65:863#8)5941::-8-):;8-9

" Depress “l dot” for low speed, “2 dots” for medium or “3 dots” for

high. To turn fan off press square”.

#!To turn light on, press light dimmer once quickly. To turn off

press once quickly while light is on. To dim light hold down button “light dimmer”.

The light will cycle from bright to dim to bright until button is released. ight will

maintain last setting if turned off.

!&!!%!" Depress rev button allow a few seconds for remote to

change rotation direction with fan running.

HIGH SPEED

MEDIUM SPEED

OW SPEED

FAN OFF SETTING

(Turns fan off only)

FAN REVERSE

(Press once to

change direction of

the fan)Fanmust be

running to reverse.

IGHT ON/OFF SET-

TING AND DIMMER

(Press and hold to

dim light infinitively)

ED IGHT

1.Check main and branch circuit fuses or circuit breakers.

2.Check line wire connections to fan and switch wire connections in switch housing.

$#)2-9;8-4)1576=-819:;85-,6..

3.Make sure forward/reverse switch is firmly in up or down position. Fan will not operate when switch is

in the middle.

4.Make sure that shipping stabilizer tabs have been removed from motor.

1.Check to make sure all screws in motor housing are snug (not over tightened).

2.Check to make sure the screws which attach the fan blade holder to the motor are tight.

3.Check to make sure wire nut connectors in switch housing are not rattling against each other or

against the interior wall of the switch housing.

$#)2-9;8-4)1576=-819:;85-,6..*-.68--5:-815/9=1:+006;915/

4.If using an optional Ceiling Fan ight Kit, check to be sure the screws securing the glassware are finger

tight. Check to be sure light bulb is tight in socket and not touching glass shade(s). If vibration persists

from glass, remove glass and install a 1/4" wide rubber band on glass neck to act as an insulator.

Replace glass and tighten screws against rubber band.

5.Some fan motors are sensitive to signals from Solid State variable speed controls.

#$")"631,":):-<)81)*3-97--,+65:863

6.Allow "break-in" period of 24 hours. Most noises associated with a new fan will disappear after this

period.

1.Make sure that the ridge of the canopy engages the notch in the downrod ball. (See illustration in

Step #6 of Downrod Mount installation).

2.Check that all blades are screwed firmly into blade holders.

3.Check that all blade holders are tightened securely to motor.

4.Make sure that canopy and mounting bracket are tightened securely to ceiling junction box and junc-

tion box is mounted firmly to ceiling joist.

5.Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a

point on the ceiling above the tip of one of the blades. Measure this distance from blade tip to ceilng.

Keeping measure within 1/8", rotate the fan until the next blade is positioned for measurement. Repeat

for each blade. If all blade levels are not equal, you can adjust blade levels by the following procedure.

To adjust a blade tip down, insert a washer (not supplied) between the blade and blade holder at the

screw closest to the motor. To adjust a blade tip up, insert washer (not supplied) between the blade and

blade holder at the two screws farthest from the motor. Reverse the position of the washer if blades

mount from top of blade.

6.If blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute the

weight and possibly result in smoother operation.

1.Check blue wire from fan to make sure it is connected to hot wire from house.

2.Check for loose or disconnected wires in fan switch housing.

3.Check for loose or disconnected wires in light kit.

4.Check for faulty light bulbs.

&!<-83)4715/:0-.)5=1338-9;3:15:0-.)531/0:990;::15/,6=5;5:13:0-

7867-8=)::)/-6.*;3*9 )8-159:)33-, !-9-::0-31/0:9*?:;8515/6..:0-=)339=1:+0

*8-)2-868*?8-46:-!-73)+-*;3*9=1:0:0-+688-+:=)::)/-*;3*9:;85:0-76=-865

$#)2-9;8-4)1576=-819:;85-,6..*-.68--5:-815/9=1:+006;915/

&!-.68-)::-47:15/:68-73)+-:0-.;9-4)2-9;8-:0-4)1576=-819:;85-,6..:6

:0-.)5!-73)+-653?=1:0))47.;9-;9-191591,-:0-+)567?65:0-*3;-=18-:68-46:-

8-+-1<-87;90)5,:=19::0-+)7:667-5:0-.;9-+)9-

2. If fan sounds noisy:

1. If fan does not start:

3. If fan wobbles:

4. If light does not

work:

TROUB E SHOOTING

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In

some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble

Shooting Chart. If a problem cannot be remedied, or you are experiencing difficulty in installation, please call our

Customer Service Center at the number printed on your parts list insert sheet.

&)8515/-.68-9-8<1+15/68+3-)515/;51:"=1:+076=-86..):"-8<1+-7)5-3)5,36+29-8<1+-,19+655-+:15/

4-)59:678-<-5:76=-8.864*-15/9=1:+0-,65)++1,-5:)33?&0-5:0-9-8<1+-,19+655-+:15/4-)59+)556:

*-36+2-,9-+;8-3?.)9:-5)786415-5:=)8515/,-<1+-9;+0)9):)/:6:0-9-8<1+-7)5-3

Trouble Suggested Remedy

Customer Service Center:

301 West Washington St.

Riverside, NJ 08075

1-800-519-4092

www.montecarlofans.com

!( 

T('&'(%

;@A?B0A6<;@=<B?9T6;@A.99.A6<;1TB;

C2;A69.A2B?12=9.3<;1

#<61@A<A.91B

C2;A69.A2B?

47# $$ *7.*;*39.1&9*:7

!  !"!

389&11&9.43&;*(4:

8&381*1:2.3&.7*

C.;A12=?<0M12?J9V6;@A.99.A6<;1BC2;A69.A2B?0<B=2G

920<B?.;A.B;6C2.B1B=.;;2.B1V2;A?M21VM920A?606AM2A

C2??<B6992G9216@=<@6A6312@20A6<;;2:2;A=<B?MC6A2?>B2

920<B?.;A;2@<6A/?.;05M.00612;A2992:2;A&6C<B@;2

=.?C2;2G=.@JC2??<B6992?9216@=<@6A6312@20A6<;;2:2;A

=9.02G@B?92=.;;2.B1V2;A?M21VM920A?606AMB;2=.;0.?A2

<BB;2MA6>B2AA212:6@22;4.?12/62;C6@6/92

C.;A1V6;@A.992?02C2;A69.A2B?CM?6362G>B29./<PA212

@<?A62120<B?.;A2@A/62;0<;;20AM2J9.05.?=2;A21B

/KA6:2;A#<B?MC6A2?92@?6@>B2@1V6;02;1621VM920A?<0B

A6<;<B1V.00612;A:<;A2G92C2;A69.A2B?B;6>B2:2;AJ

B;2/<PA212@<?A62120<B?.;A<BJB;@F@AN:212@B=

=<?A=<BC.;A@B==<?A2?92=<61@1BC2;A69.A2B?V2;@2:/92

12:<;A.421<6A=<BC<6?@B==<?A2?.B:<6;@84



(A696@2G9./<PA212@<?A62120<B?.;A2;:MA.9=<BC.;A

@B==<?A2?92=<61@1BC2;A69.A2B?84C.;A12

?2962?92C2;A69.A2B?J9./<PA212@<?A62120<B?.;A

.@@B?2GC<B@>B202992062@A=.?3.6A2:2;A.AA.05M2.B

:<6;@2;12BE=<6;A@JB;2=6N021205.?=2;A21B=9.

3<;1B;2/<PA212@<?A62120<B?.;A:.9.AA.05M2

=?<C<>B2?.12@@20<B@@2@1BC2;A69.A2B?"9.1.8*?

:3.6:*2*391*8;.8+4:73.8&;*(1*'4E9.*7)*847

9.*)*(4:7&39



V6;@A.99.A6<;2A920K/9.42M920A?6>B21<6C2;AOA?22EM0BAM@=.?B;2<B=9B@62B?@=2?@<;;2@>B.9636M2@0<;3<?:M:2;AJA<B@92@0<12@2A;<?:2@

!&!#.==960./92@F0<:=?6@9.0<;@A?B0A6<;.;A66;02;162

!VBA696@2?02AA2B;6AM>B2129.:.;6N?2=?MCB2=.?923./?60.;A&6C<B@.C2G12@>B2@A6<;@C2B6992G0<;A.0A2?923./?60.;A

(;23<6@9V2;@2:/9212@369@?.00<?1M@02BE061<6C2;AOA?2@M=.?M@92/?.;052:2;A12:6@22;A2??22A@<;0<;1B0A2B?MA.;A1VB;0RAM129.

/<PA212?.00<?12:2;A2A920<;1B0A2B?;<;?296MJ9.A2??2129V.BA?20RAM1202AA212?;6N?2

C.;A120<::2;02?9V6;@A.99.A6<;1BC2;A69.A2B?0<B=2?920<B?.;A.BA./92.BM920A?6>B20<??2@=<;1.;A2AC2??<B6992?92@16@=<@6A63@120<B=B?2

12@2?C602.36;1V2:=O052?9.?2:6@2.00612;A29921B0<B?.;A<?@>B292@16@=<@6A63@120<B=B?2120<B?.;A;2=2BC2;A=.@OA?2C2??<B699M@.==<@2?

.C20@<6;B;16@=<@6A631V.C2?A6@@2:2;A/62;C6@6/92A29>BVB;2MA6>B2AA2@B?92A./92.BM920A?6>B2

#?B12;026?2A<BA2@92@6;@A?B0A6<;@2A0<;@269@12@M0B?6AM.C.;A1V6;@A.992?C<A?2;<BC2.BC2;A69.A2B?HAB162?92@@05M:.@6;09B@1.;@9V2:/.9

9.42

.6?2.AA2;A6<;12;2=.@2;1<::.42?920K/9.42M920A?6>B2<B.BA?2@2?C6020.05M9<?@129.=?.A6>B212A?<B@.B:B?<B.B=9.3<;1

&V.@@B?2?>B29V2;1?<6A05<6@6=<B?9V6;@A.99.A6<;=2?:2A.BE=.92@1BC2;A69.A2B?12A<B?;2?@.;@</@A?B0A6<;2/<?1.??6N?212@=.92@1<6AOA?2

.B:6;6:B:J=621@:NA?2@1B@<9

''!'"!! "!'%$(&(%&"Y'&%"% !'!$(!'$( "!'V(!)!''(%+&'#% &#<B?9.

?M1B0A6<;12@?6@>B2@1V6;02;1621205<0@M920A?6>B2@<B12/92@@B?2@0<?=<?2992@6;@A.992?@B?B;2/<PA212?.00<?12:2;A<BB;@F@AN:212@B=

=<?A.002=A./92=<B?B;C2;A69.A2B?(A696@2GB;6>B2:2;A92@C6@3<B?;6@.C2092/<PA62?12@<?A62120<B?.;A2:<;A.421<6A@B==<?A2?.B:<6;@

9/@84

!2=.@=962?92@=<?A2=.92@.B0<B?@129V6;@A.99.A6<;@B?92:<A2B?129VM>B696/?.42<B1B;2AA<F.42!2=.@6;@M?2?120<?=@MA?.;42?2;A?292@

=.92@2;:<BC2:2;A

<?@129.36E.A6<;12@@B==<?A@12@B@=2;@6<;;VBA696@2?>B29.>B6;0.6992?623<B?;62.C209./<PA212?.00<?12:2;A

#<B?9.?M1B0A6<;12@?6@>B2@1V6;02;162<B1205<0@M920A?6>B2@;2=.@BA696@2?02C2;A69.A2B?.C20B;16@=<@6A63M920A?<;6>B2120<;A?R92129.

C6A2@@2<BJB;20<::.;1212C.?6.A6<;129.C6A2@@2

21M/6A2;.6?120<:/B@A6<;?2>B6@=<B?923<;0A6<;;2:2;A2;A<BA2@M0B?6AM1VM>B6=2:2;A@.96:2;AM@=.?1B0<:/B@A6/92=2BAOA?2.3320AM

=.?9.:6@22;:.?0521202AA2B;6AM&B6C?292@16?20A6C2@2A.==96>B2?92@;<?:2@12@M0B?6AM6;16>BM2@=.?923./?60.;A1VB;A29M>B6=2:2;A

0<::202992@0<::B;6>BM2@=.?9V@@<06.A6<;!.A6<;.92129.#?<A20A6<;0<;A?292@;02;162@!#2A=.?92@;4M;62B?@129V@@<06.A6<;

:M?60.6;21B5.B33.42129.%M3?64M?.A6<;2A129V6?96:.A6@M&%2A=.?92@.BA<?6AM@?2@=<;@./92@12@0<12@9<0.BE

C.;A1V23320AB2?92@2?C602129VB;6AM<B129.;2AA<F2?0<B=2?920<B?.;A.BA./92.BM920A?6>B20<??2@=<;1.;A2AC2??<B6992?92@C2??<B6992?92@

16@=<@6A63@120<B=B?212@2?C602.36;9.?2:6@2.00612;A29921B0<B?.;A<?@>B292@16@=<@6A63@120<B=B?2120<B?.;A;2=2BC2;A=.@OA?2C2??<B69

9M@.==<@2?.C20@<6;B;16@=<@6A631V.C2?A6@@2:2;A/62;C6@6/92A29>BVB;2MA6>B2AA2@B?92A./92.BM920A?6>B2

6?20A6<;1B39BE1V.6?A2:=M?.AB?205.B126;A2??B=A2B?J4.B05239BE12@02;1.;AA2:=M?.AB?23?<6126;A2??B=A2B?J1?<6A239BE.@02;1.;A

 !!

''!'"!&()%&"!&&!%H(%&%&$(&V!!

VH'%"('"!"(&&(%

   @"!@

"! "

'<B?;2C6@0?B063<?:2<B=2369@#6;02@@0./2.B

M:<;A2?9V5M96022;?2A6?.;A92@C6@

<;@2?C2?92@C6@=<B?B;[email protected]B9AM?62B?

%2A6?2?9.?<;129922;=9.@A6>B22A9.72A2?



%2:2AA?29V5M96022;=9.022;9.36E.;A

.C2092@C6@?2A6?M2@9<?@129VMA.=2

62;@2??2?92@C6@



&B@=2;12G92C2;A69.A2B?:<;AM12=B6@92@B==<?A12

@B@=2;@6<;6;@A.99M.B=9.3<;1J9VMA.=2=?M0M12;A2

@@B?2GC<B@>B292C2;A69.A2B?2@A/62;1?<6A.6A2@=6C

<A2?92C2;A69.A2B?7B@>BVJ02>B29.9.;4B2AA21B@B==<?A

12@B@=2;@6<;@V2;4.421.;@9.32;A2129.?<AB92129.

A642C2?A60.922062:=O05292/KA61BC2;A69.A2B?12

=6C<A2?9<?@>B292@9.:2@@<;A2;:<BC2:2;A



%M492G92@0<::BA.A2B?@#@B?9VM:2AA2B?12AM9M0<:

:.;122A@B?92?M02=A2B?12AM9M0<::.;12@B?92@:O:2@

0<::.;12@2062@A</964.A<6?2@6C<B@C<B92G>B292@12BE

B;6AM@0<::B;6>B2;A0<??20A2:2;AV.BA?2@C2;A69.A2B?@

=2BC2;AOA?2?M49M@@B?B;M:2AA2B?2;?M49.;A92@12BE

?M02=A2B?@@B?92@:O:2@0<::.;12@>B29VM:2AA2B?&6

C<B@.C2G=9B@62B?@C2;A69.A2B?@0<:=<?A.;A92B?=?<=?2

M:2AA2B?C<B@=<BC2G?M492?92@0<::BA.A2B?@#@B?163

3M?2;A2@=<@6A6<;@=<B?=<BC<6?92@0<::.;12?@M=.?M:2;A



#<B?92:<;A.4212@A6;M.B.;.1.>B202@<6A@29<;9.

:MA5<1212@B@=2;@6<;2;0.@A?M2<B@29<;9.:MA5<1212

9.A642C2?A60.92920K/9212@M0B?6AM1<6AOA?26;@A.99M

1.;@92@=<BA?2@129.05.?=2;A21B/KA6:2;AJ9V.61212@

C6@J/<6@JAOA20.??M2120:3<B?;62@J02A2332A

@@B?2GC<B@>B29<?@>B2920K/9212@M0B?6AM2@A2;A6N?2

:2;A1M=96M92@369@120<;;2E6<;@<;A=9B@9<;4@>B292

0K/922A>BV69@;2@<;A@<B:6@J.B0B;233<?A12A2;@6<;

<;A.4212@A6;M.B.;.1.B;6>B2:2;A

0K/9212@M0B?6AM

)6@J/<6@JAOA20.??M2

0K/9212@M0B?6AM

?<;12992

)6@J/<6@JAOA20.??M2

?<;1299212/9<0.42

#9.02G92@=<?A2=.92@@B?92@=.92@2;.964;.;A92@A?<B@

1205.>B2=<?A2=.92.C2092@A?<B@1205.>B2=.92

@@B?2GC<B@>B2920RAM129.=.92>B2C<B@@M920A6<;

;2G2@AA<B?;MC2?@92/.@;@A.992GC6@2A92@?<;

12992@2;36/?2@J9V.??6N?2129.=.920<::26;16>BM

&2??2G92@C6@J3<;1%M=MA2G02=?<02@@B@3<6@

7B@>BVJ02>B2C<B@.F2G.@@2:/9MA<BA2@92@=.92@



;@A.992G92?M02=A2B?J16@A.;02@B?

92@B==<?A



#?M=.?2G=<B?920K/9.42



.6?2920K/9.420<::26;16>BM=?M0M12::2;A

2369/9.;01BC2;A69.A2B?1<6AOA?2?.00<?1M.B369

/9.;0129.AM9M0<::.;12:.?>BM!%.00<?12?

92369;<6?1BC2;A69.A2B?.B369;<6?129.AM9M0<:

:.;12:.?>BM2A92369/9.;0129.:.6@<;.B369

/9.;0129.AM9M0<::.;12:.?>BM!

%.00<?12?92369;<6?129.:.6@<;.B369;<6?129.

AM9M0<::.;12:.?>BM2A?.00<?12?A<B@92@

369@12:6@2JA2??2C2?A@.B36912:6@2JA2??212

9.:.6@<;

 )2;A69.A2B? .6@<;

/9.;0

;<6?

C2?A@

/9.;0

;<6?

3B@6/92

/92B

M492G92@0<::BA.A2B?@#@B?9VM:2AA2B?12AM9M0<:

:.;122A@B?92?M02=A2B?12AM9M0<::.;12@B?92@

:O:2@0<::.;12@2062@A</964.A<6?2@6C<B@C<B92G

>B292@12BEB;6AM@0<::B;6>B2;A0<??20A2:2;A

V.BA?2@C2;A69.A2B?@=2BC2;AOA?2?M49M@@B?B;M:2A

A2B?2;?M49.;A92@12BE?M02=A2B?@@B?92@:O:2@

0<::.;12@>B29VM:2AA2B?&6C<B@.C2G=9B@62B?@

C2;A69.A2B?@0<:=<?A.;A92B?=?<=?2M:2AA2B?C<B@

=<BC2G?M492?92@0<::BA.A2B?@#@B?1633M?2;A2@

=<@6A6<;@=<B?=<BC<6?92@0<::.;12?@M=.?M:2;A

 <::BA.A2B?@#

129VM:2AA2B?12

AM9M0<::.;12

20<::BA.A2B?#12

AM9M0<::.;122@A@6ABM

2;5.BA1BC2;A69.A2B?

;@B6A26;@A.992G92@M0?<B@:<92AM@

0<::2699B@A?M&2??2G92@M0?<B@:<92AM@

J3<;1.4.?;6AB?212C?.6A=<BC<6?@2

0<;3<?:2?JA<BA26??M4B9.?6AM1B=9.3<;1

<B129./<PA212@<?A62120<B?.;A



2@@2??2?92@12BEC6@12/9<0.422AM0?<B@

7B@>BVJ02>BV69@;2@<62;A=9B@=.9=./92@J9V6;

AM?62B?129.05.=2;@M?2G9.A642C2?A60.92

1.;@9.0B9.@@2@B?9.=.?A62@B=M?62B?21B/KA6

1BC2;A69.A2B?964;2G92A?<B=?.A6>BM@B?9.

A642C2?A60.92.C2092A?<B=?.A6>BM1.;@9.

0B9.@@2;@M?2G9.4<B=6992JA?.C2?@9.0B9.@@2

2A9.A642C2?A60.927B@>BVJ02>B29.=<6;A2

?M.==.?.6@@2129V.BA?20RAM;@A.992G9.

4<B=699212C2??<B699.42

&2??2G92@C6@@6ABM2@@B?9.

0B9.@@2B;23<6@>B29.A642C2?A60.92

2@A2;=9.02



974:57&9.6:B

(:1&88*8:7

,4:5.11*)*

;*774:.11&,*

692A2G9.0<BC2?AB?212C2??6N?22A12

7<B4@B?921<D;?<192@369@123692A92

0K/9212@S?2AM=.?921<D;?<1&B6C2G

92@6;@2?A6<;@0<::2:<;A?M0612@@B@

#*77.*7*

4:1**

!.,*

(4:;*79:7*):/4:,



Inhaltsverzeichnis

Sprachen:

Andere Monte Carlo Fan Company Lüfter Handbücher

Monte Carlo Fan Company

Monte Carlo Fan Company Colony 5COM52 Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 3AKR56 Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company Mach One Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company Prairie 14PRR52 D Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company Bravo 5BO52 D Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 3ROZR44 Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 5MX Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company Ceiling fan Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 5NKR52XXD Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 3AVOR56 D-V1 Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 5HS52 Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 5OR52XXD-L Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 5PPR54XX Technisches Dokument

Monte Carlo Fan Company

Monte Carlo Fan Company 5MZR54 D Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 4AAR13XXD Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 4TSR56 D Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 3VER56XXD Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 5ROR Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 5VYR56XXD Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 4BFR54 Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company 5VMR84 D Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company Clarity 3CLMR56 D Series Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company AC-552 Gebrauchsanweisung

Monte Carlo Fan Company

Monte Carlo Fan Company ERA 3ERHR44 D Series Gebrauchsanweisung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung