Motorola ITMC9S12XDP512 Bedienungsanleitung

_V1.0

User’s Guide

Motorola ITMC9S12XDP512 Evaluation Board

iSYSTEM, May 2004 1/8

Ordering code ITMC9S12XDP512

ITMC9S12XDP512 Evaluation Board

iSYSTEM, May 2004 2/8

Features

The ITMC9S12XDP512 is an evaluation and development board for Motorola MC9S12XDP512

microcontroller. iSYSTEM iC3000 emulator with the MC9S12X iCARD can be used for BDM

debugging.

Features

•Motorola MC9S12XDP512 CPU (QFP144)

•BDM debug connector

•8 MHz clock oscillator (16 MHz max.)

•3 expansion connectors

•Regulated 5 V power supply

•ON/OFF switch

•2 push-buttons

•2 + 1 LED indicators

Specifications

•Board size: 93.1 x 70.9 mm

•Power input 6 - 12 V DC, 9 V DC typical

iSYSTEM, May 2004 3/8

Getting started

Setting up the board

Please, verify the EVB before applying the power supply:

•All jumpers (J1-J8) are set

•CPU is inserted firmly in the socket

•Oscillator is inserted

Use with ic3000 BDM debugger

•Insert the MC9S12X iCARD to iC3000 Active Emulator

•Connect standard 6-pin BDM cable to debug connector P4. Pay attention to pin 1.

•First turn the emulator on and then power the target. When switching off the system, first

switch off the target and then the emulator.

•Start winIDEA, open a project and carry out the debug reset. The system should be ready for

debugging. Refer to other documents for more details on the debugging.

There are two push buttons on the board designated as RESET and IRQ. RESET is connected to

CPU reset via jumper J3. Make sure that ‘Reset from target’ option is checked in winIDEA when using

RESET button and the development system is connected to the board. IRQ push button is connected

to CPU external interrupt pin PE1 via jumper J4. Both jumpers must be set to allow ‘Reset from target’

and external interrupt.

iSYSTEM, May 2004 4/8

ITMC9S12XDP512 Operation

Power Supply

The external power supply must provide the voltage between 6 and 12 V DC (typical 9 V DC).

Maximum current consumption shouldn’t exceed 100 mA when 9 V DC is used. The polarity is not

important. Low voltage DC plug must conform to the DIN 45323 standards:

•The hole diameter is 1.95 – 2.5 mm (standard: 2.1 mm)

•The external diameter is 6.2 - 5.5 mm (standard: 5.5 mm)

Note: The emulator must be powered on first, then the target board and vice versa when switching off

the system. First, switch off the target and then the emulator.

Jumpers

All CPU peripheral signals used on the board can be disconnected from the CPU via jumpers. By

removing the jumper, the belonging signal is freed for the user. Note that all CPU signals are available

on the expansion connectors and can be used by the user.

Jumper DESCRIPTION

J1 Enable LD2

J2 Enable LD3

J3 Enable RESET

J4 Enable IRQ

J5 MODA selection (default 2-3)

J6 MODB selection (default 2-3)

J7 Use internal VRH

J8 Use internal VRL

iSYSTEM, May 2004 5/8

Connectors

BDM debug connector P4

BKGD 1 2 GND

N.C. 34

RESET

N.C. 56

VDD

Expansion connectors P3, P5 and P6

PE4 1 2 GND AN16 1 2 AN17 PH3 1 2 PH2

PE6 34PE5 AN18 34AN19 PH1 34PH0

PH4 56PE7 AN20 56AN21 PD1 56PD0

PH6 78PH5 AN22 78AN23 PD3 78PD2

PC7 910

PH7 PM7 910

PM6 PE3 910

PE2

PC5 11 12 PC6 PS0 11 12 PS1 PE1 11 12 PE0

PB7 13 14 PC4 PS2 13 14 PS3 PA0 13 14 PA1

PB5 15 16 PB6 PS4 15 16 PS5 PA2 15 16 PA3

PB3 17 18 PB4 PS6 17 18 PS7 PA4 17 18 PA5

PB1 19 20 PB2 PJ7 19 20 PJ6 PA6 19 20 PA7

PC3 21 22 PB0 PJ5 21 22 PJ4 PD4 21 22 PD5

PC1 23 24 PC2 PM5 23 24 PM4 PD6 23 24 PD7

PJ0 25 26 PC0 PM3 25 26 PM2 AN0 25 26 AN8

PK4 27 28 PJ1 PM1 27 28 PM0 AN1 27 28 AN9

PT7 29 30 PK5 PK7 29 30 PP7 AN2 29 30 AN10

PT5 31 32 PT6 PP6 31 32 PP5 AN3 31 32 AN11

PT3 33 34 PT4 PP4 33 34 PP3 AN4 33 34 AN12

PT1 35 36 PT2 PP2 35 36 PP1 AN5 35 36 AN13

PK0 37 38 PT0 PP0 37 38 PJ2 AN6 37 38 AN14

PK2 39 40 PK1 PK6 39 40 PK3 AN7 39 40 AN15

P3 P5 P6

iSYSTEM, May 2004 6/8

Schematic

iSYSTEM, May 2004 7/8

Notes:

iSYSTEM, May 2004 8/8

Notes:

Inhaltsverzeichnis

Andere Motorola Hauptplatine Handbücher

Motorola

Motorola MVME167 Series Bedienungsanleitung

Motorola

Motorola GP68 Bedienungsanleitung

Motorola

Motorola M68HC11EVBU Bedienungsanleitung

Motorola

Motorola MVME166IG/D2 Bedienungsanleitung

Motorola

Motorola DSP56F803 Gebrauchsanweisung

Motorola

Motorola MVME2301 Kurzanleitung

Motorola

Motorola M68HC11EVBU Bedienungsanleitung

Motorola

Motorola MTX series Bedienungsanleitung

Motorola

Motorola MVME2700 Series Kurzanleitung

Motorola

Motorola MVME2100 Kurzanleitung

Motorola

Motorola MB68k-100 Bedienungsanleitung

Motorola

Motorola M5271EVB Bedienungsanleitung

Motorola

Motorola MVME167P Kurzanleitung

Motorola

Motorola HLD9675C Kurzanleitung

Motorola

Motorola M68360QUADS-040 Bedienungsanleitung

Motorola

Motorola MVME5500 Bedienungsanleitung

Motorola

Motorola USB08 Bedienungsanleitung

Motorola

Motorola VP22A/IH1 Kurzanleitung

Motorola

Motorola MVME3100 Handbuch

Motorola

Motorola EVB555 Bedienungsanleitung

Motorola

Motorola MPC505EVB Bedienungsanleitung

Motorola

Motorola CPV5000 Installations- und Betriebsanleitung

Motorola

Motorola MVME6100 Bedienungsanleitung

Motorola

Motorola MCP750 Kurzanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung