Motorola Avigilon ACC VMA-RPA-RGD-8P2 Bedienungsanleitung

User Guide

Avigilon ACC™ ES Rugged 8-Port Appliance

VMA-RPA-RGD-8P2 and VMA-RPA-RGD-8P4

CENTER, ACC, and AVIGILON APPEARANCE SEARCH are trademarks of Avigilon Corporation. MAC,

MacOS, FINDER and MACINTOSH are registered trademarks of Apple Inc. FIREFOX is a registered

trademark of Mozilla Foundation. Android is a trademark of Google LLC. Other names or logos mentioned

herein may be the trademarks of their respective owners. The absence of the symbols ™ and ® in proximity

to each trademark in this document or at all is not a disclaimer of ownership of the related trademark.

Avigilon Corporation protects its innovations with patents issued in the United States of America and other

jurisdictions worldwide (see avigilon.com/patents). Unless stated explicitly and in writing, no license is

granted with respect to any copyright, industrial design, trademark, patent or other intellectual property

rights of Avigilon Corporation or its licensors.

This document has been compiled and published using product descriptions and specifications available at

the time of publication. The contents of this document and the specifications of the products discussed

herein are subject to change without notice. Avigilon Corporation reserves the right to make any such

changes without notice. Neither Avigilon Corporation nor any of its affiliated companies: (1) guarantees the

completeness or accuracy of the information contained in this document; or (2) is responsible for your use

of, or reliance on, the information. Avigilon Corporation shall not be responsible for any losses or damages

(including consequential damages) caused by reliance on the information presented herein.

Avigilon Corporation

avigilon.com

PDF-8PortRuggedAnalytics-A

Revision: 2 - EN

20200612

Table of Contents

Introduction 5

Package Contents 6

Tools Required 6

Overview 7

Front View 7

Rear View 8

System Requirements 9

Camera Frame Rate 9

Web Browser 9

Supported Network Configurations 10

Mounting an ACCES Rugged 8-Port Appliance 11

Connecting an ACCES Rugged 8-Port Appliance to a Power Supply 14

Starting the ACCES Rugged 8-Port Appliance for the First Time 15

Configuring the Appliance 18

Launching the ACCESAdmin Web UI 18

Viewing PoE Port Status 20

Managing ACC Services and Storage 21

Providing Service Logs for Support 21

Rebooting the Device and Managing Device Settings 22

Monitoring and Disconnecting the Storage SSD 23

Connecting the Device to Users and Cameras 25

Assigning a PoE Power Budget 26

Providing Device Logs for Support 27

Installing and Starting the ACC Client 28

Connecting to ACC Software and ACS 29

Activating and Configuring ACC Software 29

Connecting to Avigilon Cloud Services 29

Connecting to External Devices 30

LEDIndicators 31

Budgeting PoE Power 32

Managing Certificates 33

Replacing the Web Certificate 33

Upload a Trusted CA Certificate 35

Upgrading the Firmware 36

Using the Software Reset Button 38

Restoring Factory Default Settings 40

Replacing the Storage SSD 42

Troubleshooting 45

Cannot Discover the Device 45

Network Configuration 45

Checking System Health 45

For More Information 46

Introduction

The Avigilon ACCES Rugged 8-Port Appliance is an all-in-one solution for network video recording

incorporating server side video analytics, ruggedly built for installation and use in harsh environments and

remote locations. The appliance features:

lA PoE switch to connect and power IP cameras.

lBuilt-in server to run the Avigilon Control Center Server Software.

lVideo analytics engine to enable classified object detection on connected non-analytic cameras.

This guide describes how to install the appliance in various locations, with unique power requirements and

how to configure the system after the appliance has been powered on.

Introduction 5

Package Contents

Ensure the ACCES Rugged 8-Port Appliance package contains the following:

ACCES Rugged 8-Port Appliance

Front panel key

Power supply cable (to connect to user-supplied 9-32VDC 100W (min) power supply)

Digital input/output cable

DINbracket

Mounting plate for the DIN bracket

4 (four) flat-head screws to attach the DIN bracket to the mounting plate in a plastic

bag labeled DIN rail #1

4 (four) round-head screws to attach the the ACCES Rugged 8-Port Appliance to the

mounting plate in a plastic bag labeled DIN rail #2

Important: For compliance to UL 60950-1, if the ACCES Rugged 8-Port Appliance is powered by

an external power adapter, it must be a UL Listed power adapter suitable for use at Tma is 40C

whose output meets ES1 (or SELV) and is rated 9-32Vdc, 100W minimum. Please contact Avigilon

for further information.

Tools Required

A Phillips #2 screwdriver is all that is required to attach the ACCES Rugged 8-Port Appliance and the

DINbracket to the mounting plate.

Package Contents 6

Overview

Front View

1. Power LED Indicator

2. Disk Activity LEDIndicator

See LEDIndicators on page31

3. Lock (locked position)

The front panel is normally locked to protect and prevent access to internal components, as shown

above.

4. Lock (unlocked position)

Use the key to unlock the front panel and open it to access the internal components, as shown

below.

5. CMOSBattery Holder

The power from the battery in the holder maintains the appliance's internal time and date settings,

and BIOSsettings in the CMOS memory. If the time and date settings on the appliance become

unreliable, the battery must be replaced by a trained technician only.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type recommended by the manufacturer. Discard used batteries according to the

manufacturer's instructions

Overview 7

6. SSDTray

Slide the tray in and out to access the storage SSD. See Replacing the Storage SSD on page42.

7. Reset button

Use this button to physically restart the appliance.

8. USB3.0 port

Rear View

1. Power connector

2. Corporate network uplink port

Accepts a 1GbE Ethernet connection to the general network to allow users access to the web

interface and connected camera video.

3. Camera network uplink port

Accepts a 1GbE Ethernet connection to link to other PoE switches and cameras.

4. USB2.0 ports

5. PoE switch component

Connect cameras to the 10/100 speed PoE switch component to power the cameras and record

video. The switch is capable of providing a total of 60 watts of power shared across all the PoEports.

6. I/O connector

Provides connections to external input/output devices. The two cable ends are labeled for digital

input and digital output. For more information, see Connecting to External Devices on page30.

Rear View 8

System Requirements

Camera Frame Rate

The ACCES Rugged 8-Port Appliance can provide analytics for non-analytics cameras. For optimal analytics

performance, the source camera should stream a minimum of 10 images per second (ips).

Web Browser

Administrative settings for the appliance are managed through a web interface, accessed from any

Windows, Mac or mobile device using any of the following web browsers:

lMozilla Firefox browser version 3.6 or later

lGoogle Chrome browser 8.0 or later

lMicrosoft Edge browser 25 or later

lSafari 5.0 or later

lChrome on Android 2.2 or later

lSafari on Apple iOS 5 or later.

lWindows Internet Explorer browser version 7.0 or later

Note: Your web browser must be configured to accept cookies or the web interface will not

function correctly.

System Requirements 9

Supported Network Configurations

Note: The Camera Uplink Port does not support dynamically switching DHCP servers.

Network

Connections Camera Web

Interface

Access

Supported IP Configurations

Corporate LAN

Uplink

Camera LAN

Uplink

Notes

Corporate

LAN Uplink

only

No Static or DHCP

assigned

Unconnected

(leave as DHCP)

Camera LAN Uplink and

connected cameras will use

Zeroconf IP addresses.

Camera LAN

Uplink only

Yes Unconnected

(leave as DHCP)

Static, DHCP-

assigned, DHCP-

Zeroconf

Corporate

and Camera

LAN Uplink

via Camera

LAN Uplink

only

Static, DHCP-

assigned, DHCP-

Zeroconf

Static, DHCP-

assigned, DHCP-

Zeroconf

Corporate and Camera LAN

Uplinks must be on different

subnets.

Supported Network Configurations 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Motorola Netzwerk-Hardware Handbücher

Motorola

Motorola M68MM01 Bedienungsanleitung

Motorola

Motorola 68436 - Vanguard 100I - Remote Access Server Installationsanleitung

Motorola

Motorola CPEi 750 Series Bedienungsanleitung

Motorola

Motorola SV-4250-P-1 - AirDefense Enterprise Appliance... Bedienungsanleitung

Motorola

Motorola AP-7131 Series Bedienungsanleitung

Motorola

Motorola DSR-4410MD Handbuch

Motorola

Motorola PTP 400 Series Bedienungsanleitung

Motorola

Motorola MotoWI4 PTP 600 Series Bedienungsanleitung

Motorola

Motorola MVME2300 Series Bedienungsanleitung

Motorola

Motorola DSP96002ADM Bedienungsanleitung

Motorola

Motorola DIMETRA MTS 2 Bedienungsanleitung

Motorola

Motorola Avigilon HD-NVR4-STD-16TB Bedienungsanleitung

Motorola

Motorola 2.1 Bedienungsanleitung

Motorola

Motorola M68ICS08RK Bedienungsanleitung

Motorola

Motorola MOTOwi4 Canopy 30 Bedienungsanleitung

Motorola

Motorola PTP 58500 Bedienungsanleitung

Motorola

Motorola Avigilon HD-NVR3-VAL-3TB Bedienungsanleitung

Motorola

Motorola W24 Handbuch

Motorola

Motorola Canopy Powerline MU Bedienungsanleitung

Motorola

Motorola VAP2404 Bedienungsanleitung

Motorola

Motorola NE 1000 Bedienungsanleitung

Motorola

Motorola CPEo 400 Series Bedienungsanleitung

Motorola

Motorola Starline SG 2000 Bedienungsanleitung

Motorola

Motorola Vonage VT2142 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung