Mount-It! MI-2291 Bedienungsanleitung

LCD/LED/Plasma

Wall Mount Manual

Product Overview:

Key Features:

The articulating arm mount features a at prole of 3.4" from the wall to the back of your

display and a full extension of 19.1" from the wall as well as +/-15 degrees of tilt. The mount is

constructed with 23.3LBS of 100% High Grade Steel providing a sturdy and reliable mount.

The mount's solid wall plate allows for quick and easy installation and will support a wide

variety of stud applications up to 24" apart. The mount will t the majority of LCD, LED and

Plasma Displays up to 65”. Most LCD and Plasma displays 65” and smaller conforms to the

VESA Standards. However, this mount will support most odd sized hole patterns that do not

conform to the VESA Standards.

Covers Hole Patterns 26.9" Horizontal by 15.75" Vertical and Up to VESA 600x400mm

Extends to 19.1" and Collapses To Less Than 3.4" From The Wall

15° Up & Down Tilt

Built-in Bubble Level

Double Stud Installation

Installation Hardware Included

Part

Description

8x50mm Lag Bolts

S10x50mm Concrete Anchors

8mm Washer

8x15mm Plastic Spacer

M8 Plastic Spacers

6x13 Plastic Spacer

M5/M6/M8mm Lock Washer

M5/M6/M8 Washer

M4 12mm Screw

M4 25mm Screw

M5 12mm Screw

M5 25mm Screw

M6 12mm Screw

M6 25mm Screw

M8 12mm Screw

M8 25mm Screw

M6 Allen Wrench

Mount

Left Arm, Right Arm

Quantity

4/4/4

A B CD E FGH

IJK L M N OPQRS

Up To 26.9" Horizontal by 15.75"

Vertical or VESA 600x400mm

*Hole Pattern Coverage/Supported VESA Patterns:

Unit Weight:

Unit Materials:

Tilt Range:

Total Rotation:

Arm Extension/Collapsed:

Wall Plate Dimensions:

TV Plate Dimensions:

TV Arm Bracket Height:

Net: 23.3LBS Gross: 25.7LBS

Arms, Wall Plate and TV Plate:

100% High Grade Steel

±15°

130°

Fully Extended: 19.1"

Fully Collapsed: 3.4"

25.6x8.7"

28.7x8.3"

16.4"

29.9"X9.1"X3.7"

Shipping Dimensions:

Cable Management Opening: Two Square holes 3.9"X6.9"

Installaon instrucon:

Secon 1: Wood Stud Installaon:

2x4 Stud Wall

(16-24" Spacing)

Outlet located

next to stud

Note: Please read all installation instructions carefully before installation.

For standard wood stud installation please start at Section 1: Wood Stud Installation.

For Concrete/Mortar installations please refer to Section 2: Concrete/Masonry Installation.

1. Locating a Stud: First you will need to locate the stud in the wall you wish to mount your TV

to. If you know how to locate your stud please continue to Step 2. If you do not know how to

locate your stud please continue.

Finding a Wooden Stud in Your Home: One quick way to nd a wall stud is to nd a power

outlet on the wall. Wall outlets are normally located next to a stud. The easiest way to conrm

the location of a stud is with an electronic stud nder, which you can purchase at any

hardware store.

Once you nd an initial stud, other wall studs are

typically located in the wall every 16”. Please note in

some homes they are constructed with studs every

24". Additionally, many walls have “non-standard”

studs located next to doors, windows and replaces.

To get the best support for your mount, it is important

that you put the mounting screws for your wall plate

into the center of the wall stud. If it is difcult to

determine the exact center of the stud with your stud

nder, you can get the exact location of the stud

using a thin nail and hammer. With the hammer, pound the thin nail into the wall in the area of

the stud. If the nail is to the side of the stud it will go through the drywall and easily into the

empty space in the wall. If the nail is on the stud, once it goes through the drywall, it will not go

into the wall easily as it is hitting the wood of the stud. Keep repeating this process in the area

of the stud until you can tell exactly where the stud starts and ends. The middle of these two

points is the center of the stud.

2. Mark and Pre-Drill Installation Points: Once

you have located your studs, Mark the hole

locations where you intend to drill, assure that

they are level with one another. Use a 5mm drill bit

to pre-drill four holes to a depth of 2”. If you do not

have a metric drill bit a 3/16” drill bit will work as

well.

3. Attaching The Mount to Your Wall:

Once the four holes are pre-drilled, afx the

wall plate to the wall with all four lag bolts and

washers into the wall. The included plastic

anchors DO NOT need to be used for wood

stud installation.

Note on locating hardware to mount arms

to your display: If your display does not

come with the mounting screws in the back of

the display, check the original desk stand as in

some cases the same screws to hold the desk

stand are used also to mount your display. If

neither of these options work, the hardware

pack incl u de d w i th y o ur m o u nt c o nt a in s

several of the most common sized screws for

mounting your arm brackets to your display.

4. Installing Arm Brackets Onto The Back

of Yo ur D is pl ay : O nc e y o u l oc at e t h e

app ro pri a te sc r ews, a ttac h the t wo arm

brackets to the back of the display. To attach

the arms use the proper bolt and lock washer

for each of the four mounting holes. In the

event your display has recessed holes or a

curved back, your hardware pack includes

plastic spacers to ll the gaps. These plastic

s p a c e r s a r e n o t n e c e s s a r y f o r m o s t

installations.

5. Attaching Your Display to The Wall Plate: After

installing the wall plate and testing to ensure that it is

attached securely and attaching the arms to the back of

the display, it is time to attach your display to the wall. This

step may require two people, attach the hook to the top lip

of the wall plate. Once the hooks are securely set onto the

wall plate you can now let the bottom of the display rotate

back and it will simply hang on the mount.

6. Securing Your Display: The all mount utilizes a set

screw attached to the bottom of each one of the arm

brackets. To secure the arm bracket to the TV plate, locate

the set screw on the bottom of the arm then tighten in a

clockwise motion until tight. This screw ensures that your

display will not lift off of the mount.

Part A

Part C

Tilt Knob

Safety Screw

D/E/FH

I/J/K/L/M/N/O/P

Revision date: 07/09/2016

7. Adjusting Your Tilt: To adjust the tilt position on your display you will need to loosen the

knob on the side of each one of the arm brackets, set the desired tilt and then tighten the arms

back up. You can loosen the screws slightly so that it will still hold while you adjust your tilt,

once you have set the desired angle of tilt you can then fully tighten the knobs.

Section 2: Concrete and Masonry Installation:

1. Mark Instal l a ti o n P oi n t s: O n c e y ou ha v e

selected the location you want the mount to be,

mark the exact location where the anchors and lag

bolts will be installed. Next, pre-drill the holes using

a masonry 10mm drill bit to a depth of 2” then insert

the supplied anchors. If you do not have a metric

drill bit a 3/8" drill bit will work.

Drilling Into Concrete: When drilling into concrete

or masonry, you have to use a special masonry drill

bit which you can purchase at your local hardware

store, using a standard drill bit will not penetrate the

concrete and it will just dull your drill bit. It is not

recommended to drill and mount into concrete block

or mortar joints. If mounting into concrete or

masonry we recommend using all of the supplied

plastic anchors and lag bolts for maximum support.

The supplied plastic anchors are rated for use up to

165LBS, but if you prefer you can go to your local

hardware store and purchase metal concrete

anchors.

2. Attaching The Mount to Your Wall:

Once the holes are pre-drilled and all plastic

anchors are inserted, affix the wall plate with the

four supplied lag bolts into the wall.

At this point you can proceed back to Step 4 in the wood stud

installation section to complete your Concrete/Masonry installation.

ATTENTION:

This mount must be installed using the supplied hardware with all lag bolts screwed into your

stud. If you are mounting into concrete or mortar, all four anchors and screws must be used for

maximum support.

Andere Mount-It! Rack & Stand Handbücher

Mount-It!

Mount-It! MI-2751 Bedienungsanleitung

Mount-It!

Mount-It! MI-391 Bedienungsanleitung

Mount-It!

Mount-It! MI-2041L Bedienungsanleitung

Mount-It!

Mount-It! MI-310 Bedienungsanleitung

Mount-It!

Mount-It! MI-7957 Bedienungsanleitung

Mount-It!

Mount-It! MI-751 Bedienungsanleitung

Mount-It!

Mount-It! TPM-MA09-24P Bedienungsanleitung

Mount-It!

Mount-It! MI-390 Bedienungsanleitung

Mount-It!

Mount-It! MI-4200 Bedienungsanleitung

Mount-It!

Mount-It! MI-7610 Bedienungsanleitung

Mount-It!

Mount-It! MI-705 Bedienungsanleitung

Mount-It!

Mount-It! MI-706 Bedienungsanleitung

Mount-It!

Mount-It! MI-4352LT Bedienungsanleitung

Mount-It!

Mount-It! MI-850 Bedienungsanleitung

Mount-It!

Mount-It! MI-391 Bedienungsanleitung

Mount-It!

Mount-It! MI-7264 Bedienungsanleitung

Mount-It!

Mount-It! MI-394 Bedienungsanleitung

Mount-It!

Mount-It! MI-2757 Bedienungsanleitung

Mount-It!

Mount-It! MI-390 Bedienungsanleitung

Mount-It!

Mount-It! 2781 Bedienungsanleitung

Mount-It!

Mount-It! MI-763 Bedienungsanleitung

Mount-It!

Mount-It! MI-792 Bedienungsanleitung

Mount-It!

Mount-It! MI-772 Bedienungsanleitung

Mount-It!

Mount-It! MI-754 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung