Moxa Technologies EOM-104 Series Bedienungsanleitung

P/N: 1802001040014

*1802001040014*

EOM-104

Quick Installation Guide

Moxa Embedded Ethernet Switch Module

Edition 4.1, March 2018

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The EOM-104 Series Ethernet switch module provides an easy,

cost-effective, and integrated solution for device manufacturers to embed

an Ethernet switch module into an existing product for enhanced

performance and reliability.

The module supports 10/100 Mbps Fast Ethernet, and comes with Turbo

Ring’s fast recovery time of under 20 ms built in. The EOM-104 Series also

provides a rich set of peripherals (e.g., GPIO programming pins and DIP

switches to enable Turbo Ring) and is an ideal solution for embedded

Ethernet applications.

Package Checklist

The EOM-104 Series Evaluation Kit package contains the following items:

•EOM-104 series module

•EOM-104 series evaluation board

•Universal power adaptor

•2 power cords

•Null modem serial cable

•Cross-over Ethernet cable

•Accessories pack

•Quick installation guide (printed)

•Warranty card

Note: Please notify your sales representative if any of the above items are

missing or damaged.

First-Time Installation and Configuration

Before installing the EOM-104 Series, please check to make sure that all

items in the Package Checklist are in the box.

Hardware Installation Procedure

Step 1: Plug the EOM-104 Series into the evaluation board.

Plug the EOM-104 Series module into the sockets on the top of the

evaluation board

Step 2: Connect the power source to the evaluation board.

Connect the 12 VDC power line to the evaluation board’s power jack.

Step 3: Connect the network cable to the evaluation board.

Use the RJ45 Ethernet cable to connect the Ethernet port on the

evaluation board to an Ethernet network for evaluation.

Step 4: Set up the computer’s IP address.

In a Windows environment, the IP address can be changed in the TCP/IP

Settings window. Select an IP address on the same subnet as the

EOM-104 Series. Since the default IP address of the EOM-104 is

192.168.127.253, and the subnet mask is 255.255.255.0, you should set

the IP address of the computer to 192.168.127.xxx.

Step 5: Configure the EOM-104 Series.

Please refer to EOM-104 Series User’s Manual.

- 3 -

Layout of the EOM-104 Series

Pin Assignment

JP1 (2x20 connector pin assignment)

PIN 1 3 5 7 9 11 13 15 17 19

SIGNAL

TX2 - RX2 - NC RX1 +

TX1 +

NC GND 3.3V GND DTR

SIGNAL

TX2 +

RX2 +

RX1 -

TX1 -

GND

3.3V

GND

DSR

SIGNAL

TXD GPIO 1

GPIO 3

MASTER

ENABLE

MASTER

LED

PORT

1 LED

PORT

3 LED

MANUAL

RESET

3.3V GND

SIGNAL

RXD GPIO 2

GPIO 4

TURBO

RING

ENABLE

TURBO

RING

LED

RESET

DEFAULT

PORT

4 LED

PORT

2 LED

3.3V GND

J1 (1 x 9 connector pin assignment)

PIN 1 2 3 4 5 6 7 8 9

SIGNAL GND TX4 + TX4 - 3.3V 3.3V FXSD RX4 - RX4 + GND

J2 (1 x 9 connector pin assignment)

SIGNAL

GND

TX3 +

TX3 -

3.3V

FXSD

RX3 -

RX3 +

GND

JP3 (2 x 2 connector pin assignment)

Jumpers 1 and 2 for Ring Master Enable

Jumpers 3 and 4 for Turbo Ring Enable

- 4 -

Layout of the Evaluation Board

1. 12 VDC Power Jack

2. Console Port

3. GPIO

4. Turbo Ring DIP Switch

5. PWR LED

6. Turbo Ring LED

7. Ring Master LED

8. Port 1 LED

9. Port 2 LED

10. Port 3 LED

11. Port 4 LED

12. Port 1 10/100BaseT(X)

13. Port 2 10/100BaseT(X)

14. Port 3 10/100BaseT(X), or 100BaseFX (Turbo Ring Port 1)

15. Port 4 10/100 BaseT(X),or 100BaseFX (Turbo Ring Port 2)

16. J2 Connector (Connect to EOM-104 J1)

17. J1 Connector (Connect to EOM-104 J2)

18. 3.3VDC Power Connector

19. JP5 Connector (Connect to EOM-104 JP1)

20. Reset to Default Button

21. Manual Reset Button

- 5 -

Turbo Ring DIP Switch Setting

OFF

DIP1

Enable this EOM as

the Ring Master

This EOM will not

be the Ring Master

DIP2

Activate Turbo Ring

Do not use Turbo

Ring

DIP3

GPIO Reserve

DIP4

GPIO Reserve

DIP5

GPIO Reserve

DIP6

GPIO Reserve

Specifications

Technology

Standards

IEEE 802.3 for 10BaseT

IEEE 802.3u for 100BaseT(X) and 100BaseFX

IEEE 802.3x for flow control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid STP

IEEE 802.1p for Class of service

Protocols

SNMPv1/v2c/v3, DHCP Client, BootP, TFTP, SMTP,

RARP, RMON, HTTP, Telnet, Syslog

MIB

MIB-II, Ethernet-Like MIB, P-Bridge MIB, Bridge

MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9

Flow Control

IEEE 802.3x flow control

Interface

Ethernet Ports

EOM-104: 4 10/100BaseT(X)

EOM-104-FO: 2 10/100BaseT(X) and 2 100BaseFX

Connectors

1 connector with 2 x 20 pins and 2 connectors with

1 x 9 pins

Console Port

RS-232 (TxD, RxD, DTR, DSR)

GPIO

4 programmable I/O pins

Power Requirements

Input Voltage

3.3V

Input Current EOM-104: 0.48 A @ 3.3 V

EOM-104-FO: 1.1 A @ 3.3 V

Physical Characteristics

Dimensions

54 x 60 x 8.25 mm (2.13 x 2.36 x 0.32 in)

Environmental Limits

Operating

Temperature

-40 to 75°C (-40 to 167°F)

Storage Temperature

-40 to 85°C (-40 to 185°F)

Ambient Relative

Humidity

5 to 95% (non-condensing)

Regulatory Approvals

EMI

FCC Part 15, CISPR 32 class A,

CE class A

Note: Please check Moxa’s website for the most up-to-date certification

status.

Warranty

Warranty Period

5 years

Details

See www.moxa.com/warranty

Andere Handbücher für EOM-104 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Steuereinheit Handbücher

Moxa Technologies

Moxa Technologies ioThinx 4500 45ML-5401 Bedienungsanleitung

Moxa Technologies

Moxa Technologies CA Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioMirror E3200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies WAPN008 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NE-4100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Z2150 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ABC-01 Bedienungsanleitung

Moxa Technologies

Moxa Technologies CB-108 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort W1 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort W1 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort E1 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies WAPN001 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AWK-3252A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CA Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies WAPN005 Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2400 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1261W-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort E Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort W1 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-IRIGB-4DIO-PCI104-EMC4 Bedienungsanleitung

Moxa Technologies

Moxa Technologies WAPA003 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 4101-MB-PBS Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort W1 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies PT-G503-PHR-PTP-HV Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung