Moxa Technologies NPort Z2150 Bedienungsanleitung

– 1 – – 2 – – 3 –

P/N: 1802021504011

*1802021504011*

NPort Z2150

Quick Installation Guide

Second Edition, July 2015

Overview

The NPort Z2150 is a reliable wireless serial I/O with support for

serial to ZigBee communications. The NPort Z2150 can act as a

ZigBee Coordinator, ZigBee Router or ZigBee End Device. Any

serial device can be connected by the NPort Z2150 and exchange

data via Personal Area Network (PAN).

Package Checklist

Before installing the NPort Z2150, verify that the package contains

the following items:

Standard Accessories

•NPort Z2150

•Documentation & Software CD

•Warranty statement

•Quick Installation Guide

•2.4 GHz, omni-directional antenna

Optional Accessories

•DK-35A: DIN-rail mounting kit (35 mm)

NOTE: Please notify your sales representative if any of the above

items are missing or damaged.

Hardware Introduction

LED Indicators

LED

Color

Descriptions

Ready/Fault

Green

On: System power is on

Blinking: Pull down the reset button

Red

Blinking:

1) Node ID conflict

2) Destination node ID disappeared

ZigBee Link Green

Coordinator:

ON: ZigBee PAN initialized successfully

Blinking: ZigBee Tx/Rx

Off: ZigBee PAN initialization failure

Router:

On: Joined ZigBee PAN successfully

Blinking: ZigBee Tx/Rx

Off: Failure to join ZigBee PAN

End Device:

On: Joined ZigBee PAN successfully

Blinking: ZigBee Tx/Rx

Off: Failure to join ZigBee PAN/ parent

node removed

Serial Tx/Rx

Green

Serial data output to serial port

Orange

Serial data input from serial port

The NPort Z2150 models have one serial port. All models support

RS-232/422/485 with DB9 connectors.

Reset Button

The reset button is used to load factory defaults. Use a pointed

object such as a straightened paper clip to hold the reset button

down for five seconds. Release the reset button when the Ready

LED stops blinking.

DIP Switch

Serial Connection

Console Mode

Operation Mode

OFF

NOTE

2 reserved for future use.

Pull High/Low Resistors for RS-422/485

You may need to set the pull high/low resistors when termination

resistors are used for certain RS-422 or RS-485 environments.

Pull High

Pull Low

Terminator

Reserved

1KΩ

120KΩ

–

Default

OFF

150KΩ

–

NOTE

Do not use the 1KΩ setting while in RS-232 mode. Doing so

will degrade the RS

-232 signals and reduce the effective

communication distance.

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

First-time Hardware Installation

STEP 1:

After removing the NPort Z2150 from the box, set the

DIP-switch to console mode and use a cross-over serial

cable to connect the NPort’s DB9 serial port directly to

your computer’s serial port to configure.

STEP 2:

Attach the power adaptor to the NPort and then plug the

adaptor into an electrical outlet.

STEP 3:

Configure the NPort Z2150 through the serial port. See

the next section for software installation information.

Software Installation Information

Insert the Documentation & Software CD. A window should open

with several options displayed:

•Click Documents and select “NPort Z2150 Series User’s

Manual” to view the user’s manual.

•Click Install Utility and follow the on-screen instructions to

install the ZigBee Configuration Utility. This utility can be used

to search for NPort Z2150 units via serial ports.

Pin Assignments and Cable Wiring

PIN RS-232

RS-422,

4w RS-485

2w RS-485

DCD

TxD-(A)

–

RXD

TxD+(B)

–

TXD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

Specifications

Power Requirements

Input Voltage

12 to 48 VDC

Power Consumption

45 mA @ 12 V

Connector

Power Jack

Physical Characteristics

Weight

340g

Dimension

Without ears:

With ears:

52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)

75 x 80 x 22 mm (2.95 x 3.15 x 0.87 in)

Regulatory Approvals

EMC

CE (EN55022 Class A, EN55024), FCC Part

15 Subpart B Class A

Safety

UL (UL60950-1), LVD (EN60950-1)

WARNING

This equipment is intended to be used in a Restricted

Access Location.

This product is intended to be supplied by an UL

60950-1 and IEC 60950-1 certified power supply

marked “LPS” and rated output rating: 12 to 48

VDC,

45 mA @ 12 V minimum, 75°C.

Andere Moxa Technologies Steuereinheit Handbücher

Moxa Technologies

Moxa Technologies TCC-100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies PWR-190-AC/DC Bedienungsanleitung

Moxa Technologies

Moxa Technologies WAPN005 Bedienungsanleitung

Moxa Technologies

Moxa Technologies WFS001 Bedienungsanleitung

Moxa Technologies

Moxa Technologies WAPA003 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EOM-G103-PHR-PTP Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies WE-2100T Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 4101-MB-PBS Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort W1 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort E1 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort E2-H Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort E Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioThinx 4500 45ML-5401 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NE-4100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort W1 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies Industio CI-134 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies PT-G503-PHR-PTP-HV Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1261W-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies CA Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies WAPN008 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioMirror E3200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-IRIGB-4DIO-PCI104-EMC4 Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2400 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies PWR-100 Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung