Moxa Technologies V2201 Bedienungsanleitung

Andere Handbücher für V2201

2

Dieses Handbuch passt für folgende Modelle

2

Inhaltsverzeichnis

Andere Moxa Technologies Desktop Handbücher

Moxa Technologies

Moxa Technologies MC-3201 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-660-8-LX Bedienungsanleitung

Moxa Technologies

Moxa Technologies MPC-2121 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7410-LX Plus Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2406 Bedienungsanleitung

Moxa Technologies

Moxa Technologies IA260 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8100-LX Montageanleitung

Moxa Technologies

Moxa Technologies UC-7402 Bedienungsanleitung

Moxa Technologies

Moxa Technologies W406 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2416 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-660A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-681A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DRP Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-710 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8410 Bedienungsanleitung

Moxa Technologies

Moxa Technologies V3200 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies DA-681 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies BXP-A100 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies MC-7400 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8540 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7122 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-3100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2406C Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies BXP-C100 Series Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

P/N: 1802022010010

*1802022010010*

V2201

Quick Installation Guide

Edition 1.0, October 2015

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



2015 Moxa Inc. All rights reserved.

- 2 -

Overview

The Moxa V2201 series ultra-compact x86 embedded computer is based

on the Intel® Atom™ E3800 series processor, features the most reliable

I/O design to maximize connectivity, and supports dual wireless modules,

making it suitable for a diverse range of communication applications. The

computer’s thermal design ensures reliable system operation in

temperatures ranging from -40 to 85°C, and wireless operation in

temperatures ranging from -40 to 70°C with a special purpose Moxa

wireless module installed. The V2201 series supports “Moxa Proactive

Monitoring” for device I/O status monitoring and alerts, system

temperature monitoring and alerts, and system power management.

Closely monitoring the system status makes it easier to recover from

errors and provides the most reliable platform for your applications.

Package Checklist

Before installing the V2201, verify that the package contains the following

items:

•V2201 embedded computer

•Terminal block to power jack converter

•Wall mounting kit

•Quick installation guide (printed)

•Documentation and software CD or DVD

•Warranty card

NOTE: Please notify your sales representative if any of the above

items are missing or damaged.

V2201 Panel Layout

The following figures show the panel layouts of the V2201-W series; for

“non-W” series, the 5 antenna connectors will not be installed during

production.

Rear View

Right Side View

- 3 -

Left Side View

LED Indicators

The following table describes the LED indicators located on the front panel

of the V2201.

LED Name

Status

Function

Power

Green

Power is on and computer is functioning

normally.

Off

Power is off

User Defined

Red

Event has occurred

Off

No alert

mSATA

Yellow

Blinking: Data is being transmitted

Off

Not connected / No data transmission

SD Card

Yellow

Blinking: Data is being transmitted

Off

Not connected / No data transmission

Wireless 1

Green

Steady On: Link is On

Blinking: Data is being transmitted

Off

Not connected

Wireless 2 Green Steady On: Link is On

Blinking: Data is being transmitted

Off

Not connected

LAN 1

Yellow

Steady On: 1000 Mbps Ethernet link

Blinking: Data is being transmitted

Green

Steady On: 100 Mbps Ethernet link

Blinking: Data is being transmitted

Off

10 Mbps Ethernet link or LAN is not connected

LAN 2

Yellow

Steady On: 1000 Mbps Ethernet link

Blinking: Data is being transmitted

Green Steady On: 100 Mbps Ethernet link

Blinking: Data is being transmitted

Off

10 Mbps Ethernet link or LAN is not connected

Tx 1

Green

Blinking: Data is being transmitted

Off

Not connected

Tx 2

Green

Blinking: Data is being transmitted

Off

Not connected

Rx 1

Yellow

Blinking: Data is being transmitted

Off

Not connected

Rx 2

Yellow

Blinking: Data is being transmitted

Off

Not connected

NOTE

The mini-PCIe card’s LED behavior depends on the module

- 4 -

Installing the Wireless Modules

ATTENTION

“

-W” models (e.g., V2201-E2-W-T) will have a

cellular card heat

sink and 5 wireless SMA connectors

installed during the

production process.

The V2201 has two mini-PCIe sockets on the bottom panel. One socket

supports USB signals only, using the MC9090, MC7354, or MC7354

mini-PCIe cards. Another socket supports standard USB + PCIe signals.

STEP1: Loosen the four screws in

the middle

of the bottom panel

and

open the bottom cover.

There are two mini-PCIe sockets:

Socket 1: USB signal, for 3G/LTE

mini

-PCIe card (Sierra Wireless

MC9090, MC7304,

or MC7354).

NOTE:

The c

ellular card heat sink

is installed

in socket 1.

Socket 2:

Standard USB + PCIe

signals, for

Wi-Fi mini-PCIe card

(SparkLAN WPEA

-252NI).

STEP 2: Insert the wireless module

card

at an angle.

STEP 3:

Push the wireless module

card

down and fasten it with the 2

screws

that were included with the

product

.

STEP 4: Connect the connectors

with the

corresponding wireless

module cards.

5 connectors

are attached to the

mini

-PCIe sockets:

No. 1 & No. 3:

Wi-Fi mini-PCIe card

No.

2 & No. 4:

3G/LTE mini-PCIe card

No. 5:

GPS

STEP 5: Replace the bottom cover.

- 5 -

STEP 6: You may also purchase external 3G, 4G, and Wi-Fi antennas

from Moxa. Please contact a Moxa sales representative for information.

After installing the wireless modules and wireless external antennas, the

computer should appear as follows:

Installing the V2201

DIN-Rail Mounting

The DK-DC50131 die-cast metal kit must be bought separately. The kit

enables easy and robust installation of the V2201. Use 4 screws to attach

the DIN-rail mounting kit tightly to the side panel of the V2201.

Installation:

STEP 1:

Insert

the upper lip of the DIN-

rail into the

DIN

-rail mounting kit.

STEP 2:

Press the V2201 towards the DIN

-

rail until

it snaps into place.

Removal:

STEP 1:

Pull down the latch on the

mounting kit with a screwdriver.

STEP 2 & 3:

Use a screwdriver to pry the

V2201

slightly forward

away from

the DIN

-rail, and then lift the

V2201

upwards

to remove it from

the DIN

-rail.

- 6 -

STEP 4:

Press the recessed button on the

spring

-loaded bracket to lock it into

position

until the next time you need to

install the V2201 to a

DIN-rail.

Wall or Cabinet Mounting

The V2201 comes with two metal brackets for attaching it to a wall or the

inside of a cabinet.

Step 1:

Use two screws for each bracket

and attach the bracket to the

rear of the V2201.

Step 2:

Use four screws per

side to

attach the V2201 to a wall or

cabinet.

Connector Description

Power Connector

Connect the 9 to 36 VDC LPS or Class 2 power line to the V2201’s terminal

block. If the power is supplied properly, the Power LED will light up. The

OS is ready when the Ready LED glows a solid green.

Grounding the V2201

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from the

grounding screw (M4) to the grounding surface prior to connecting the

power.

- 7 -

ATTENTION

This product is intended to be mounted to a well

-grounded

mounting surface, such as a metal panel.

SG: The Shielded Ground (sometimes called

Protected Ground) contact is the right most of the

3

-pin power terminal block connector when

viewed from the angle shown here. Connect the

SG wire to an appropriate grounded metal

surface.

HDMI Outputs

The V2201 comes with a type A HDMI female connector on the front panel

to connect an HDMI monitor.

The screw hole above the HDMI connector is used to attach a custom lock

to the HDMI connector; a custom lock is needed since the shape of

different HDMI connectors are not the same. Please contact a Moxa sales

representative for details.

The lock appears as shown below:

The lock should appear as follows after it is attached to the V2201:

Ethernet Ports

The 10/100/1000 Mbps Ethernet ports use RJ45 connectors.

Pin

10/100 Mbps

1000 Mbps

1

ETx+

TRD(0)+

2

ETx-

TRD(0)-

3

ERx+

TRD(1)+

4

–

TRD(2)+

5

---

TRD(2)-

6

ERx-

TRD(1)-

7

–

TRD(3)+

8

–

TRD(3)-

- 8 -

Serial Ports

The serial ports use DB9 connectors. Each port can be configured by

software for RS-232, RS-422, or RS-485. The pin assignments for the

ports are shown in the following table:

Pin RS-232 RS-422

RS-485

(4-wire)

RS-485

(2-wire)

1

DCD

TxDA(-)

TxDA(-)

–

2

RxD

TxDB(+)

TxDB(+)

–

3

TxD

RxDB(+)

RxDB(+)

DataB(+)

4

DTR

RxDA(-)

RxDA(-)

DataA(-)

5

GND

GND

GND

GND

6

DSR

–

–

–

7

RTS

–

–

–

8

CTS

–

–

–

SD Slot

The V2201 has an SD slot for storage expansion. The SD slot allows users

to plug in an SD 3.0 standard SD card. To install an SD card, gently

remove the outer cover from the left, and then insert the SD card into the

slot.

USIM Slot

The V2201 has a USIM slot for 3G/LTE wireless Internet connections. To

install a USIM card, gently remove the outer cover from the left, and then

insert the USIM card into the slot.

USB Hosts

The V2201 has 1 USB 3.0 and 2 USB 2.0 Type A connectors. 2 USB 2.0

ports are located on the front panel, and 1 USB 3.0 port is on the right

panel. The port supports keyboard and mouse, and can also be used to

connect a FlashDisk for storing large amounts of data.

Audio Interface

The audio output of the V2201 is combined with the HDMI connector.

DI/DO

The V2201 comes with 4 digital inputs and 4 digital

outputs

on a 2x5 terminal block.

Reset Button

Press the “Reset Button” on the left side panel of the V2201 to reboot the

system automatically.

Real-time Clock

The V2201’s real-time clock is powered by a lithium battery. We strongly

recommend that you do not replace the lithium battery without help from

a qualified Moxa support engineer. If you need to change the battery,

contact the Moxa RMA service team.

- 9 -

ATTENTION

There is a risk of explosion if the battery is replaced by an

incorrect type of battery.

Powering on the V2201

To power on the V2201, connect the “terminal block to power jack

converter” to the V2201’s DC terminal block (located on the side panel),

and then connect the 9 to 36 VDC power adapter. Press the Power Button

to turn on the computer. Note that the Shielded Ground wire should be

connected to the top pin of the terminal block. It takes about 30 seconds

for the system to boot up. Once the system is ready, the Power LED will

light up.

Connecting the V2201 to a PC

Power on the V2201 computer after connecting a monitor, keyboard, and

mouse, and verifying that the power source is ready. Once the operating

system boots up, the first step is to configure the Ethernet interface. The

factory default settings for the V2201’s LANs are show below (W7E uses

DHCP).

Default IP Address

Netmask

LAN 1

192.168.3.127

255.255.255.0

LAN 2

192.168.4.127

255.255.255.0

Configuring the Ethernet Interface

Linux users should follow these steps:

If you use the console cable to configure network settings for the first

time, use the following commands to edit the interfaces file:

#ifdown –a

//Disable LAN1~LAN2 interface first, before you

reconfigure the LAN settings. LAN1 = eth0, LAN2 = eth1//

#vi /etc/network/interfaces

//check the LAN interface first//

After the boot setting of the LAN interface has been modified, use the

following commands to immediately activate the LAN settings:

#sync; ifup –a

W7E users should follow these steps:

STEP 1:

Go to Start



Control Panel



Network and Internet



View

network status and tasks

Change adapter setting.

STEP 2:

In the Local Area Connection Properties screen, click Internet

Protocol (TCP/IP) and then select Properties. Select Internet

Protocol Version 4, and then click Properties.

STEP 3:

Click OK after inputting the proper IP address and netmask.

- 10 -

NOTE

Refer to the V2201 user’s manuals for other configuration

information.