Moxa Technologies UC-8100A-ME-T Bedienungsanleitung

P/N: 1802081121010

*1802081121010*

UC-8100A-ME-T

Quick Installation Guide

Edition 1.0, January 2019

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll-free: 1-888-669-2872

Tel: 1-714-528-6777

Fax: 1-714-528-6778

Moxa China (Shanghai office):

Toll-free: 800-820-5036

Tel: +86-21-5258-9955

Fax: +86-21-5258-5505

Moxa Europe:

Tel: +49-89-3 70 03 99-0

Fax: +49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel: +886-2-8919-1230

Fax: +886-2-8919-1231

Moxa India:

Tel: +91-80-4172-9088

Fax: +91-80-4132-1045

- 2 -

Overview

The UC-8100A-ME-T computing platform is designed for embedded data

acquisition applications. The UC-8100A-ME-T computer comes with two

RS-232/422/485 serial ports and dual 10/100 Mbps Ethernet LAN ports,

as well as a Mini PCIe socket to support cellular modules. These versatile

communication capabilities let users efficiently adapt the UC-8100A-ME-T

to a variety of complex communications solutions.

Package Checklist

Before installing the UC-8100A-ME-T, verify that the package contains

the following items:

•UC-8100A-ME-T embedded computer

•Power jack

•Console cable

•Quick installation guide (printed)

•Warranty card

IMPORTANT!

Notify your sales representative if any of the above items are

missing or damaged.

UC-8100A-ME-T Panel Layout

The following figures show the panel layouts of the UC-8100A-ME-T:

Top Panel View

Bottom Panel View

- 3 -

Front Panel View

LED Indicators

LED Name

Color

Function

USB

Green

Steady On

USB device is connected and

working normally.

Off

USB device is not connected.

Green

Steady On

SD Card inserted and working

normally.

Off

SD card is not detected.

Power

Green

Power is on and the computer is working

normally.

Off

Power is off.

LAN1/

LAN 2

(RJ45

connector)

Green

Steady On

100 Mbps Ethernet link

Blinking

Data transmission in progress

Yellow

Steady On

10 Mbps Ethernet link

Blinking

Data transmission in progress

Off

Ethernet is not connected.

Wireless

Signal

Strength

Green

Yellow

Red

The number of glowing LEDs indicates the

signal strength.

3 (Green + Yellow + Red): Excellent

2 (Yellow + Red): Good

1 (Red): Poor

Off

Wireless module is not detected.

USR

User-

defined

Green

This LED can be defined by users. For

details, refer to Hardware User’s Manual.

- 4 -

LED Name

Color

Function

Programm

able

diagnostic

LEDs

Green

Yellow

Red

These three LEDs are programmable. For

details, refer to the “Default Programmable

Button Operation" section in the Hardware

User’s Manual.

Specifications

Input Current

500 mA @ 12 VDC

Input Voltage

12 to 36 VDC (3-pin terminal block,

V+, V-, SG)

Power Consumption

6 W (without cellular module and

external USB device attached)

Operating Temperature

Without LTE Module preinstalled:

-40 to 85°C (-40 to 185°F)

With LTE Module preinstalled:

-40 to 70°C (-40 to 158°F)

Storage Temperature

-40 to 85°C (-40 to 185°F)

Installing the UC-8100A-ME-T

DIN-rail Mounting

The aluminum DIN-rail attachment plate is already attached to the

product’s casing. To mount the UC-8100A-ME-T on to a DIN rail, make

sure that the stiff metal spring is facing upwards and follow these steps.

1. Pull down the bottom slider

of the DIN-rail bracket

located at the back of the

unit

2. Insert the top of the DIN rail

into the slot just below the

upper hook of the DIN-rail

bracket.

3. Latch the unit firmly on to

the DIN rail as shown in the

illustrations below.

4. Push the slider back into

place.

- 5 -

Wall Mounting (Optional)

The UC-8100A-ME-T can be mounted with a wall-mounting kit that needs

to be purchased separately. Follow these steps to mount the computer on

to a wall:

Step 1

Use four screws to fasten the

wall-mounting brackets on the

left panel of the computer.

Step 2

Use another four screws to mount

the computer on a wall or a

cabinet.

Connector Description

Power Connector

Connect the power jack (in the package) to the UC-8100A-ME-T’s DC

terminal block (located on the top panel), and then connect the power

adapter. It takes about 30 seconds for the system to boot up. Once the

system is ready, the Power LED will light up.

Grounding the UC-8100A-ME-T

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI).

SG:

The Shielded Ground (sometimes called

Protected Ground) contact is the top contact of

the 3-pin power terminal block connector when

viewed from the angle shown here. Connect the

SG wire to an appropriate grounded metal

surface.

Ethernet Ports

The two 10/100 Mbps Ethernet ports (LAN 1 and LAN 2) use RJ45

connectors.

Signal

Tx+

Tx-

Rx+

Rx-

Serial Ports

The two serial ports (P1 and P2) use terminal connectors. Each port can

be configured by software for RS-232, RS-422, or RS-485. The pin

assignments for the ports are shown in the following table:

- 6 -

RS-232

RS-422

RS-485

TXD

TXD+

–

RXD

TXD-

–

RTS

RXD+

D+

CTS

RXD-

D-

GND

SD/SIM Card Sockets

The UC-8100A-ME-T comes with an SD socket for storage expansion, and

a SIM card socket for cellular communication. The SD card/SIM card

sockets are located at the lower part on the front panel. To install the

cards, remove the screw and the protection cover to access the sockets,

and then insert the SD card or the SIM card into the sockets directly. You

will hear a click when the cards are in place. To remove the cards, push

the cards in before releasing them.

Console Port

The console port is an RS-232 port that can be connected to with a 4-pin

pin header cable. You can use this port for debugging or firmware

upgrade.

Signal

TxD

RxD

GND

USB Port

The USB 2.0 port is located at the lower part of the front panel and

supports a USB storage device driver. By default, the USB storage is

mounted at /mnt/usbstorage.

Antenna Connectors

There are three antenna connectors on

the front panel of the UC-8100A-ME-T.

W1 and W3 are for cellular modules, and

W2 is for the GPS module. All three

connectors are of SMA type.

- 7 -

Real-time Clock

The real-time clock in the UC-8100A-ME-T is powered by a lithium battery.

We strongly recommend that you do not replace the lithium battery

without the help of a Moxa support engineer. If you need to change the

battery, contact the Moxa RMA service team.

ATTENTION

There is a risk of explosion if the battery is replaced with an

incorrect type of battery.

Accessing the UC-8100A-ME-T Using a PC

You can use a PC to access the UC-8100A-ME-T by one of the following

methods:

A. Through the serial console port with the following settings:

Baudrate=115200 bps, Parity=None, Data bits=8, Stop bits =1,

Flow Control=None

ATTENTION

Remember to choose the “VT100” terminal type. Use the console

cable to connect a PC to the UC-8100A-ME-T's serial console port

B. Using SSH over the network. Refer to the following IP addresses and

Default IP Address

Netmask

LAN 1

192.168.3.127

255.255.255.0

LAN 2

192.168.4.127

255.255.255.0

Password: moxa

Inhaltsverzeichnis

Andere Moxa Technologies Industrie-PC Handbücher

Moxa Technologies

Moxa Technologies DA-660 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies AIG-300 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2406-24I Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies IA260 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2426A-C2 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AIG-300 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies DA-681C Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies BXP-C100 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies CN2510 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IA260 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-685 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TC-6110-W7E Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-681A Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies V2616A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies THINKCORE W345 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-682C Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IA240-LX Bedienungsanleitung

Moxa Technologies

Moxa Technologies V481-XPE Bedienungsanleitung

Moxa Technologies

Moxa Technologies V460 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EM-1240-LX Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies MC-1100 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies AWK-4252A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies THINKCORE W345 Bedienungsanleitung

Beliebte Industrie-PC Handbücher anderer Marken

Chipsee

Chipsee PPC-A72-101 Bedienungsanleitung

Advantech

Advantech UNO-2184G Bedienungsanleitung

MSI

MSI MS-9A76 Bedienungsanleitung

Stackrack

Stackrack THOR200 Bedienungsanleitung

Nodka

Nodka eBOX-3000-ETC Bedienungsanleitung

Siemens

Siemens SIMATIC IPC627E Bedienungsanleitung

Artila

Artila Matrix-516 Bedienungsanleitung

MSI

MSI MS-9A89 Bedienungsanleitung

Siemens

Siemens SIMATIC Rack PC 840 V2 Bedienungsanleitung

Advantech

Advantech IPPC-6152A Bedienungsanleitung

Beckhoff

Beckhoff CX9020 Bedienungsanleitung

Dell

Dell Embedded Box PC 5000 Bedienungsanleitung

IBASE Technology

IBASE Technology ASB200-918 Series Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M90q Betriebsanleitung

IXXAT

IXXAT Econ 100 Bedienungsanleitung

Kontron

Kontron KBox A-151-TGL Bedienungsanleitung

AXIOMTEK

AXIOMTEK ICO500-518 Series Bedienungsanleitung

JLT

JLT 1214N Bedienungsanleitung