Moxa Technologies NPort Express DE-211 Bedienungsanleitung

– 1 – – 2 – – 3 –

P/N: 1802002112401

NPort DE-211

Quick Installation Guide

Seventh Edition, May 2011

Overview

Welcome to Moxa’s NPort Express DE-211, a compact palm-sized

data communication device that allows you to control

RS-232/422/485 serial devices over a TCP/IP based Ethernet

network.

Package Checklist

Before installing the NPort Express DE-211, verify that the

package contains the following items:

•1 NPort Express DE-211

•NPort DE-211 quick installation guide

•Documentation and software CD

•Warranty card

Optional Accessories

•NP21101: RS-232 cable: DB25 (M) to DB9 (F), 30 cm

•NP21102: RS-232 cable: DB25 (M) to DB9 (M), 30 cm

•NP21103: DB25 Terminal Block Kit for RS-422/485

•DK-35A: DIN-Rail Mounting Kit (35 mm)

Notify your sales representative if any of the above items are

missing or damaged.

Hardware Introduction

The NPort DE-211 device server has one female DB25 serial port.

The four DIP switches located on the rear panel are used to select

RS-232 COM mode, and one of four data modes: RS-232, RS-422,

4-wire RS-485, and 2-wire RS-485. See the “DIP Switch Settings

and Explanation” section for details.

Reset Button

•Press the Reset button continuously for 3 sec to erase the

password. After 3 sec, the Ready LED will flash on/off every

half second. Release the reset button at this time to erase the

password.

•Press the Reset button continuously for 10 sec to load factory

defaults. After 10 sec, the Ready LED will flash on/off every

half second. Release the reset button at this time to load

factory defaults.

LED Indicators (top panel)

LED Name

LED Color

LED Function

PWR

red

Power is on

off

Power is off, or power error condition

exists

Link

orange

10 Mbps Ethernet connection

off Ethernet cable is disconnected, or

has a short

Ready

green

NPort Server system is ready

off

NPort Server has malfunctioned

Serial Tx

green

Serial data is being transmitted

off

Serial data is not being transmitted

Serial Rx

orange

Serial data is being received

off

Serial data is not being received

Hardware Installation Procedure

Placement Options

In addition to placing

the

DE-211 unit on a

desktop or other

horizontal surface, you

may also make use of

the DIN

-Rail or Wall

Mount options, as

illustrated here.

Wall Mount

DIN-Rail

DIP Switch Settings and Explanation

The top panel of the DE-211 contains the following table, which

describes how to set up the serial port using the four DIP switches

located on DE-211’s rear panel.

SW1

Serial

Connection

SW2

SW3

SW4

Serial Interface Mode

OFF

RS-232

Console

OFF

RS-422

OFF

4-wire RS-485 by RTS

OFF Data Comm

4-wire RS-485 by ADDC

OFF

2-wire RS-485 by RTS

OFF

2-wire RS-485 by ADDC

Switch SW1 controls the function of the serial port. Note that after

changing the setting of SW1, the DE-211 will reboot to initialize the

new setting. You must wait a few seconds for the green Ready light

to blink off and then on again, indicating that the function of the

serial port has been changed. Switches SW2, SW3, and SW4

control the serial port’s data communication Interface Mode. (RTS

stands for Ready To Send and ADDC stands for Automatic Data

Direction Control.)

Keep the following points in mind when setting the DIP switches:

•To use the serial port as an RS-232 console connection, such

as when using MOXA PComm Terminal Emulator or

HyperTerminal, set SW1 to the ON position.

•Some setup procedures can be carried out through a Telnet

connection, in which case data is transmitted through the

DE-211’s Ethernet port. However, you must set SW1 to the

OFF position to establish a Telnet connection.

Power

PowerGND

RS-422/485 RS-422/485

RS-232 PC

Power

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

Software Installation Information

Detailed information about installing the software that comes with

the DE-211 can be found on the NPort Documentation and

Software CD in the “NPort Family Software Installation Guide”.

Pin Assignments and Cable Wiring

Female DB25 Connector Pinouts

WARNING

Pin 1 is reserved for debugging.

Connecting this pin

yourself could result in irreparable damage to your device.

RS-232 Wiring

RS-422 Wiring

RS-485 Wiring

DB25 Terminal Block Kit (RS-422, RS-485-2W/4W)

Environmental Specifications

Power requirements

12 to 30 VDC

150 mA (max.) at 12 V

92 mA (max.) at 24 V

Operating Temp.

0 to 55°C

Ambient Relative

Humidity

5 to 95% (non-condensing)

Dimensions

Including ears: 90.2 × 100.4 × 22 mm

(3.55 × 3.95 × 0.87 in)

Without ears: 67 × 100.4 × 22 mm

(2.64 × 3.95 × 0.87 in)

Surge Protection

15 KV ESD for the serial port

Magnetic Isolation

Protection

1.5 KV for the Ethernet port

Regulatory

Approvals

FCC Class B, CE Class B, UL 60950-1, EN

60950-1

Andere Handbücher für NPort Express DE-211

Inhaltsverzeichnis

Andere Moxa Technologies Netzwerk-Hardware Handbücher

Moxa Technologies

Moxa Technologies AirWorks AWK-3121 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA 5250 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies airworks awk-5232 Bedienungsanleitung

Moxa Technologies

Moxa Technologies RNAS-1200 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A-W4 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies C320Turbo/PCIEL Bedienungsanleitung

Moxa Technologies

Moxa Technologies AWK Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies AWK-6232-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies INJ-24A Series Handbuch

Moxa Technologies

Moxa Technologies MRC-1002 Series Kurzanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-5222 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NE-4000T Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7420/7410 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MiiNePort E3 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5410 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5110 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-1137C Bedienungsanleitung

Moxa Technologies

Moxa Technologies ThinkCore DA-660-8-CE Bedienungsanleitung

Moxa Technologies

Moxa Technologies IA3341 Gebrauchsanweisung

Moxa Technologies

Moxa Technologies UC-7110 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-660-LX Bedienungsanleitung

Moxa Technologies

Moxa Technologies TRC-2190 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies PT-G510 Series Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung