Moxa Technologies NPort 5210 Bedienungsanleitung

LED Indicators—The top panels of NPort 5200 have four LED

indicators, as described in the following table.

5200 Series

Quick Installation Guide

Second Edition, December 2003

LED

Name

LED

Color LED Function

red

Steady on: Power is on and NPort 5200 is

booting up.

Blinking: Indicates an IP conflict, or DHCP or

BOOTP server did not respond

properly.

green

Steady on: Power is on and NPort 5200 is

functioning normally.

Blinking: The device server has been located

by Administrator’s Location

function

Ready

off Power is off, or power error condition exists.

orange 10 Mbps Ethernet connection.

green 100 Mbps Ethernet connection.

Ethernet

off Ethernet cable is disconnected, or has a short.

orange Serial port is receiving data.

green Serial port is transmitting data.

P1, P2

off No data is being transmitted or received through

the serial port.

1. Overview

Welcome to the NPort 5200 Series, a compact palm-sized data

communication device that allows you to control RS-232 (NPort

5210/5230) or RS-422/485 (NPort 5230/5232/5232I) serial devices over a

TCP/IP-based Ethernet.

2. Package Checklist

Before installing the NPort 5200 Series products, verify that the package

contains the following items:

 1 NPort 5200 2-port Serial Device Server

 Documentation & Software CD

 NPort 5200 Series Quick Installation Guide

Optional Accessories

 DK-35A DIN-Rail Mounting Kit (35 mm)

 CBL-RJ45M9-150

 CBL-RJ45F9-150

 CBL-RJ45M25-150

 CBL-RJ45F25-150

RJ45 (8-pin) to DB9 (M) cable, 150 cm

RJ45 (8-pin) to DB9 (F) cable, 150 cm

RJ45 (8-pin) to DB25 (M) cable, 150 cm

RJ45 (8-pin) to DB25 (F) cable, 150 cm

DIN-Rail Power Supply and Adapter

4. Hardware Installation Procedure

STEP 1: After removing NPort 5200 from the box, the first thing you

should do is connect the power adaptor. Connect the 12-30 VDC power

line with NPort 5200’s terminal block, or connect the DIN-Rail power

supply with NPort 5200’s terminal block.

STEP 2: Connect NPort 5200 to a network. Use a standard

straight-through Ethernet cable to connect to a Hub or Switch. When

setting up or testing NPort 5200, you might find it convenient to connect

directly to your computer’s Ethernet port. In this case, use a cross-over

Ethernet cable.

Notify your sales representative if any of the above items is missing or

damaged.

3. Hardware Introduction

As shown in the following figures, NPort 5210 has two 8-pin RJ45 ports,

both for the RS-232 interface, NPort 5230 has one 10-terminal terminal

block, with 5 pins used for one RS-232 port, and 5 pins used for one

RS-422/485 port, and NPort 5232 /5232I has one 10-terminal terminal

block, with all pins used for RS-422/485 ports.

STEP 3: Connect NPort 5200’s serial port to a serial device.

Reset Button—Press the Reset button continuously for 5 sec to load

factory defaults: Use a pointed object, such as a straightened paper clip or

toothpick, to press the reset button. This will cause the Ready LED to

blink on and off. The factory defaults will be loaded once the Ready LED

stops blinking (after about 5 seconds). At this point, you should release

the reset button.

—1——2——3—

NPort 5210/5230: 12 to 30 VDC, 305

mA at 12V (max.)

NPort 5232: 12 to 30 VDC, 275

mA at 12V (max.)

Power requirements

NPort 5232I: 12 to 30 VDC, 365

mA at 12 V (max.)

Operating temp. 0 to 55◦C (32 to 131◦F)

Operating humidity 5 to 95% RH

NPort 5210/5230/

5232

(including ears)

90 × 100.4 × 22 mm

3.54 × 3.95 × 0.87 in

Dimensions

(W×D×H)

NPort 5210/5230/

5232

(without ears)

67 × 100.4 × 22 mm

2.64 × 3.95 × 0.87 in

NPort 5232I 90 × 100.4 × 35 mm

(including ears) 3.54 × 3.95 ×1.37 in

NPort 5232I 67 × 100.4 × 35 mm

(without ears) 2.64 × 3.95 × 1.37 in

Surge protection 15 KV ESD for serial port

Magnetic isolation 1.5 KV for Ethernet

4 KV Burst (EFT), EN61000-4-4

Power line

protection 2 KV Surge, EN61000-4-5

Regulatory

approvals

FCC Class A, CE Class A, UL, CUL, TÜV

Note: NPort 5232/5232I has 2 RS-422/485 ports. The pin assignments

are the same as NPort 5230’s port 2. Refer to the “NPort 5200

Series User’s Manual” for more details.

7. Pin Assignments and Cable Wiring—NPort 5230

—6—

Terminal Block Wiring

8. Environmental Specifications

STEP 4: Placement Options

In addition to placing

NPort 5200 on a

desktop or other

horizontal surface, you

may also make use of

the DIN-Rail or Wall

Mount options, as

illustrated here.

Wall Mount

DIN-Rail

5. Software Installation Information

To install NPort Administration Suite, insert the NPort Document &

Software CD into your computer’s CD-ROM drive. Once the NPort

Installation CD window opens, click on the Installation button, and then

follow the instructions on the screen.

To view detailed information about NPort 5200 Administration Suite,

click on the Documents button, and then select “NPort 5200 Series

User’s Guide” to open the pdf version of this user’s guide.

The PComm Lite program is also included in the Documentation &

Software CD free of charge. Install PComm Lite to use the Serial

Console to configure the initial IP address.

6. Pin Assignments and Cable Wiring—NPort 5210

RJ45 (8-pin) Connector Pinouts

Cable Wiring (RS-232)

Four cables are provided as optional accessories that can be used to

connect NPort 5210 to RS-232 serial devices. For your convenience, we

show precise cable wiring diagrams for each of the four cables.

P/N:18020520001

RJ45 (8-pin) to DB25 Female (Cable Name: CBL-RJ45F25-150)

RJ45 (8-pin) to DB25 Male (Cable Name: CBL-RJ45M25-150)

RJ45 (8-pin) to DB9 Male (Cable Name: CBL-RJ45M9-150)

RJ45 (8-pin) to DB9 Female (Cable Name: CBL-RJ45F9-150)

—5—

—4—

Andere Handbücher für NPort 5210

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Server Handbücher

Moxa Technologies

Moxa Technologies NPort 5610-16 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6450 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5410 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Handbuch

Moxa Technologies

Moxa Technologies NPort 5610 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000A-I/O series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2250A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort S8455I Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort S9000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies 2140 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2250 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5230 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6450 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150AI Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik W5300 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung