Moxa Technologies NPort 5000AI-M12 Bedienungsanleitung

– 1 – – 2 – – 3 – - 4 -

P/N: 1802051503010

NPort 5000AI-M12

Quick Installation Guide

First Edition, May 2010

Overview

NPort 5000AI-M12 device servers are designed to make serial

devices network-ready in an instant. It is complaint with EN

50155/EN 50121-4. So it can work on rolling stock and way side for

needing high level vibration environment. Use the NPort

5000AI-M12 device servers to give your PC software direct access to

serial devices from anywhere on the network.

Package Checklist

Before installing the NPort 5000AI-M12 series device servers, verify

that the package contains the following items:

•

1 NPort 5000AI-M12 series Device Server

•Documentation and Software CD

•Quick Installation Guide (printed)

•Warranty Card

Optional Accessories

•DR-45-24 45W/2A DIN-Rail 24 VDC Power Supply with

universal 85 to 264 VAC input

•DR-75-24 75W/3.2A DIN-Rail 24 VDC Power Supply with

universal 85 to 264 VAC input

•DR-120-24 120W/5A DIN-Rail 24 VDC Power Supply with

88 to 132 VAC/176 to 264 VAC input

•DK-TN-5308 DIN-Rail kit

Notify your sales representative if any of the above items is

missing or damaged.

Hardware Introduction

The NPort 5150AI-M12 series has a 3-in-1 (RS-232/422/485) DB9

serial port for serial data communication, the NPort 5250AI-M12

series has two 3-in-1 (RS-232/422/485) DB9 serial ports for serial

data communication, and the NPort 5450AI-M12 has four 3-in-1

(RS-232/422/485) DB9 serial ports for serial data communication.

NPort 5150AI-M12 Appearance

NPort 5250AI-M12 Appearance

NPort 5450AI-M12 Appearance

The Reset to Default Button—Depress the Reset to default button

for 5 continuous seconds to load the factory default settings. Use a

pointed object, such as a straightened paper clip or toothpick, to

depress the Reset to default button. This will cause the Ready LED to

blink on and off. The factory default settings are loaded once the

Ready LED stops blinking (after about 5 seconds). At this point, you

can release the Reset to default button.

NPort 5000AI-M12 LED Indicators (front panel)

Name

Color

Function

PWR

green

Power is being supplied to the power input.

Ready

red

Steady on:

Power is on and NPort is booting up.

Blinking:

Indicates an IP conflict, or

DHCP/BOOTP server did not resp

ond

properly.

green

Steady on:

Power is on and NPort is functioning

normally.

Blinking:

The NPort has been located by NPort

Administrator’s Location function.

off

Power is off, or a power error condition exists.

10M,

100M

orange

10 Mbps Ethernet connection.

green

100 Mbps Ethernet connection.

off

Ethernet cable is disconnected.

P1, P2,

P3, P4

orange

Serial port is receiving data.

green Serial port is transmitting data.

off No data is being transmitted or received through

the serial port.

Hardware Installation Procedure

Panel/Wall Mounting

Mounting the NPort 5000AI-M12 on the wall requires 3 screws.

Please use the 3 screws packed in.

STEP 1: Prepare the 3 screw holes on the wall according to the

positions of the 3 screw holes on the device server shown on the

mounting dimension diagram.

STEP 2: Use one screw to go through the top-middle screw hole on

the device server and screw it into the wall.

STEP 3: Screw in the remaining 2 screws through the bottom-left

and bottom-right holes on the device server to the wall.

NOTE

Please use the screws (M3 x 40 mm) included.

DIN-Rail Mounting (optional)

With the optional DIN-Rail mounting kit DK-TN-5308 (must be

purchased separately), you can mount the NPort 5000AI-M12 on a

35mm DIN-Rail.

STEP 1: Fix the DIN-Rail attachment plate onto the rear panel of the

device server as shown in the figure at the right.

– 5 – – 6 – – 7 – - 8 -

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

STEP 2: Position the NPort 5000AI-M12 on the DIN-Rail, tilting to

hook clamps over the top edge of the rail.

STEP 3: Swing the device server down fully onto the DIN-Rail until

both clamps completely latch.

Software Installation Information

To install NPort Administration Suite, insert the Document &

Software CD into your computer’s CD-ROM drive. Once the

installation window opens, click on the Installation

Administration Suite button, and then follow the instructions on

the screen. To view detailed information about the NPort

Administration Suite, click on the Documents button, and then

select the NPort 5000AI-M12 series User’s Manual to open the pdf

version of this user’s manual.

Note: NPort 5000AI-M12 is supported with NPort Administrator in

version 1.18.

Pin Assignments and Cable Wiring

Ethernet M12:

Housing: shield

Power M12:

Description

1 Input V+

2 Not assigned

3 Input V-

4 Not assigned

5 Function ground

RS-232/422/485 (Male DB9) Pinouts

PIN RS-232 RS-422/

RS-485 (4W)

RS-485 (2W)

DCD

TxD-(A)

---

RXD

TxD+(B)

---

TXD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

---

RTS

---

CTS

---

Four cables are available as optional accessories that can be used to

connect the NPort 5000AI-M12 series to RS-232 serial devices. The

pin assignments for both connector types are show below.

Female DB9 to Male DB9

Specifications

Physical Characteristics

Housing: Metal, IP40 protection

Dimensions: 80 x 216.6 x 52.9 mm (3.14 x 8.53 x 2.08 in)

Environmental Limits

Operating Temperature:

Standard Models: -25 to 55°C (32 to 140°F)

Wide Temperature Models: -40 to 75°C (-40 to 167°F)

Operating Humidity: 5 to 95% RH

Storage Temperature: -40 to 85°C (-40 to 185°F)

Conformal coating

Available on –CT models

Power Input (Need to modularize)

Input Voltage: 12/24/36/48 VDC (8.4 to 60 VDC)

Power Consumption:

NPort 5150AI-M12: 310mA @12V

NPort 5150AI-M12-CT: 310mA @12V

NPort 5150AI-M12-T: 310mA @12V

NPort 5250AI-M12: 360mA @12V

NPort 5250AI-M12-CT: 360mA @12V

NPort 5250AI-M12-T: 360mA @12V

NPort 5450AI-M12: 440mA @12V

NPort 5450AI-M12-CT: 440mA @12V

NPort 5450AI-M12-T: 440mA @12V

Connector: M12

Power Line Protection: Meets EN 50155 certification

Regulatory Approvals

EMC: CE (EN 55022 Class A, EN 55024)(EMI),

FCC Part 15 Subpart B Class A(EMS)

Safety: UL (UL60950-1)

Rail Traffic: EN 50155/50121-4

Shock: IEC 61373

Vibration: IEC 61373

Freefall: IEC 60068-2-32

Reliability

Alert Tools: Built-in buzzer and RTC

Automatic Reboot Trigger: Built-in WDT (watchdog timer)

MTBF (meantime between failures):

NPort 5150AI-M12: 789,341 hrs

NPort 5250AI-M12: 639,622 hrs

NPort 5450AI-M12: 467,777 hrs

Warranty

Warranty Period: 5 years

Details: See www.moxa.com/warranty

For railway rolling stock applications, the device must use a

galvanically isolated power supply that is compliant with the

EN 50155 standard.

Andere Handbücher für NPort 5000AI-M12

Dieses Handbuch passt für folgende Modelle

Andere Moxa Technologies Server Handbücher

Moxa Technologies

Moxa Technologies NPort P5150A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5610-8 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort S8455I-MM-SC Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150Plus Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Server Lite DE-302 Handbuch

Moxa Technologies

Moxa Technologies NPort 5000AI-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5450A Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik R2110 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5410 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Bedienungsanleitung

Moxa Technologies

Moxa Technologies 2140 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Handbuch

Moxa Technologies

Moxa Technologies NPort W2004 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2500 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2510-8 Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2510-16 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies 5600 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung