Moxa Technologies NPort IA5150 series Bedienungsanleitung

– 1 – – 2 – – 3 –

P/N: 1802051500213

NPort IA5150/5250 Series

Quick Installation Guide

Fifth Edition, July 2013

Overview

NPort IA device servers deliver easy and reliable serial-to-Ethernet

connectivity for the industrial automation market. The servers

support several operation modes—TCP Server, TCP Client, UDP,

Real COM, Pair Connection, and Ethernet Modem—ensuring the

compatibility of network software, and are an ideal choice for

connecting RS-232/422/485 serial devices, such as PLCs, sensors,

meters, motors, drives, barcode readers, and operator displays.

NPort IA device servers come with a compact and rugged DIN rail

mountable casing.

Package Checklist

Before installing NPort IA device servers, verify that the package

contains the following items:

•1 NPort IA series device server

•Documentation and software CD

•NPort IA series quick installation guide

Optional Accessories

•DR-4524: 5W/2A DIN rail 24 VDC power supply with universal

85 to 264 VAC input

•DR-75-24: 75W/3.2A DIN rail 24 VDC power supply with

universal 85 to 264 VAC input

•DR-120-24: 120W/5A DIN rail 24 VDC power supply with 88

to 132 VAC/176 to 264 VAC input by switch

Note: Notify your sales representative if any of the above items are

missing or damaged.

NPort IA5150 Series Appearance

NPort IA5250 Appearance

Reset Button—Press the Reset button continuously for 5 sec to

load factory defaults: Use a pointed object, such as a straightened

paper clip or toothpick, to press the reset button. This will cause

the Ready LED to blink on and off. The factory defaults will be

loaded once the Ready LED stops blinking (after about 5 seconds).

At this point, you should release the reset button.

NPort IA LED Indicators (front panel)

Name

Color

Function

PWR1,

PWR2

red

Power is being supplied to power input PWR1,

PWR2.

Ready

red

Steady on: Power is on and the NPort IA is

booting up.

Blinking: Indicates an IP conflict, the

DHCP or

BOOTP server did not respond properly, or a

relay output occurred.

green

Steady on: Power is on and the NPort IA is

functioning normally.

Blinking: The device server has been located

by Administrator’s Location function.

off

Power is off, or a power error condition exists.

Ethernet

Orange

10 Mbps Ethernet connection.

Green

100 Mbps Ethernet connection.

off

Ethernet cable is disconnected, or has a short.

P1, P2

orange

Serial port is receiving data.

green

Serial port is transmitting data.

off

No data is being transmitted or received

through the serial port.

orange

Steady on: Ethernet fiber connection, but port

is idle.

Blinking: Fiber port is transmitting or

receiving data.

Hardware Installation Procedure

STEP 1: After removing the NPort IA from the box, the first thing

you should do is connect the power adaptor. Connect the 12-48

VDC power line with the NPort IA’s terminal block, or connect the

DIN rail power supply with the NPort IA’s terminal block.

STEP 2: Connect the NPort IA to a network. Use a standard

straight-through Ethernet cable to connect to a hub or switch.

When setting up or testing the NPort IA, you might find it

convenient to connect directly to your computer’s Ethernet port. In

this case, use a cross-over Ethernet cable.

STEP 3: Connect the NPort IA’s serial port to a serial device.

STEP 4: The NPort IA is designed to be attached to a DIN rail or

mounted on a wall. The two sliders on the NPort IA’s rear panel

serve a dual purpose. For wall mounting, both sliders should be

extended. For DIN rail mounting, start with one slider pushed in,

and the other slider extended. After placing the NPort IA on the

DIN rail, push the extended slider in to lock the device server to

the rail. The two placement options are illustrated in the

accompanying figures.

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

Wallmount

DIN Rail

Software Installation Information

To install NPort Administration Suite, insert the Document &

Software CD into your computer’s CD-ROM drive. Once the

installation window opens, click on the Install Administration

Suite button, and then follow the instructions on the screen. To

view detailed information about NPort IA Administration Suite,

click on the Documents button, and then select NPort

IA5150/5250 Series User’s Manual to open the pdf version of

this user’s manual.

Pin Assignments and Cable Wiring

RS-232/422/485 (Male DB9) Pinouts

RS-232

RS-422/RS-485 (4W)

RS-485 (2W)

DCD

TxD-(A)

–

RXD

TxD+(B)

–

TXD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

4W/2W RS-485/RS-422 (Terminal Block) Pinouts

–

TxD+(B)

–

TxD-(A)

Data+(B)

RxD+(B)

Data-(A)

RxD-(A)

–

GND

Four cables are available as optional accessories that can be used

to connect the NPort IA to RS-232 serial devices. For your

convenience, we show precise cable wiring diagrams for each of

the two cables.

Female DB9 to Male DB9

Female DB9 to Male DB25

ATEX and IECEx Information

1. Certificate number: DEMKO 07 ATEX 0690059x

2. Ambient range (-40°C ≤ Tamb ≤ 75°C)

3. Certification string (Ex nA IIC T3)

4. Standards covered (EN60079-0:2006, EN60079-15:2005,

IECEx UL 13.0023X, IEC 60079-0 Ed. 6, IEC 60079-15 Ed. 4)

5. Conditions of safe usage:

The Ethernet Communication Devices are to be mounted in an

IP54 enclosure and used in an area of not more than pollution

degree 2 as defined by IEC 60664-1.

A 4 mm2conductor must be used when connection to the

external grounding screw is utilized.

Conductors suitable for use in an ambient temperature of

114°C must be used for the Power Supply Terminal.

Provisions shall be made, either in the apparatus or external to

the apparatus, to prevent the rated voltage being exceeded by

the transient disturbances of more than 40%.

Andere Handbücher für NPort IA5150 series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Server Handbücher

Moxa Technologies

Moxa Technologies NPort S8455I-MM-SC Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2610 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6450 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2250A-T-EU Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2250 Plus Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5450A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6450 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150 Plus Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150AI Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Server Pro Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik R2140 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A-W4 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5250AI-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik W5300 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung