Moxa Technologies EtherDevice EDS-P510 Series Handbuch

Moxa EtherDevice™ Switch

EDS-P510 Series Hardware Installation Guide

First Edition, November 2008

Reproduction without permission is prohibited.

P/N: 1802005101010

—1 —

Overview

We describe two products in this manual:

The Moxa EtherDevice™ EDS-P510 Series Ethernet switches are Gigabit

managed redundant Ethernet switches that come standard with 4

10/100BaseT(X) 802.3af (PoE) compliant Ethernet ports and 3 combo

Gigabit Ethernet ports. The EDS-P510 Ethernet switches provide up to 15.4

watts of power per PoE port, and allow power to be supplied to connected

devices (such as surveillance cameras, wireless access points, and IP phones)

when AC power is not readily available or cost-prohibitive to provide locally.

The EDS-P510 Ethernet switches are highly versatile, and their SFP fiber

port can transmit data up to 80 km from the device to the control center with

high EMI immunity. The Ethernet switches support a variety of management

functions, including Turbo Ring, RSTP/STP, IGMP, VLAN, QoS, RMON,

bandwidth management, and port mirroring. The EDS-P510 series is

designed especially for security automation applications such as IP

surveillance and gate of entry systems, which can benefit from a scalable

backbone construction and Power-over-Ethernet support.

The SPL-24 plays the role of PD, and splits the data signal and power signal

that are transmitted from the PSE. The SPL-24 plays a dual role of providing

power to industrial devices, and enabling Ethernet connections.

The EDS-P510 and SPL-24 can operate from 0 to 60°C or -40 to 75°C for T

model and are designed to withstand a high degree of vibration and shock.

The rugged hardware design makes the EDS-P510 Series and SPL-24 perfect

for ensuring that your Ethernet equipment can operate in critical industrial

environments, such as in hazardous locations, and complies with FCC and CE

standards.

The installation of the EDS-P510 Series is presented on pages 8 to 14. The

installation of the SPL-24 is presented on pages 14 to 18.

NOTE Throughout this Hardware Installation Guide, we use EDS as an

abbreviation for Moxa EtherDevice Switch, and we use SPL as an

abbreviation for Moxa PoE Splitter:

EDS = Moxa EtherDevice Switch

SPL = Moxa PoE Splitter

Moxa’s PoE Solution

Power over Ethernet

Power

Legend: Ethernet

E215312

LISTED

IND.CONT. EQ.

94A0

SPL-24

AWK-1100

EDS-P510 Series

Wireless Access Point

Data on

Ethernet

Data on

Ethernet 24 VDC output

48 VDC input

DR-120-48

PWR1

PWR2

FAULT

EDS-P510

MASTER

COUPLER

10/100/1000

10/100

EtherDevice Switch

Turbo

Ring

PoE

—2 —

Package Checklist

The EDS-P510 is shipped with the following items. If any of these items are

missing or damaged, please contact your customer service representative for

assistance.

y1 EDS-P510 EtherDevice Switch

yHardware Installation Guide (this guide)

yCD-ROM with user’s manual and Windows utility

yMoxa product warranty statement

yRJ45 to DB9 console port cable

yProtective caps for unused ports

yDIN-Rail mounting kit (attached to the EDS-P510’s rear panel by default)

Optional Accessories

ySFP-1GSXLC: SFP module with 1 1000BaseSX port with LC conncector

for 0.5 km transmission (standard operating temperature: 0 to 60°C)

ySFP-1GLXLC: SFP module with 1 1000BaseLX port with LC conncector

for 10 km transmission (standard operating temperature: 0 to 60°C)

ySFP-1GLHXLC: SFP module with 1 1000BaseLHX port with LC

conncector for 40 km transmission (standard operating temperature: 0 to

60°C)

ySFP-1GZXLC: SFP module with 1 1000BaseZX port with LC conncector

for 80 km transmission (standard operating temperature: 0 to 60°C)

ySFP-1G10ALC: WDM-type (BiDi) SFP module with 1 1000BaseSFP port

with LC connector for 10 km transmission; TX 1310 nm, RX 1550 nm

(standard operating temperature: 0 to 60°C)

ySFP-1G10BLC: WDM-type (BiDi) SFP module with 1 1000BaseSFP port

with LC connector for 10 km transmission; TX 1550 nm, RX 1310 nm

(standard operating temperature: 0 to 60°C)

ySFP-1G20ALC: WDM-type (BiDi) SFP module with 1 1000BaseSFP port

with LC connector for 20 km transmission; TX 1310 nm, RX 1550 nm

(standard operating temperature: 0 to 60°C)

ySFP-1G20BLC: WDM-type (BiDi) SFP module with 1 1000BaseSFP port

with LC connector for 20 km transmission; TX 1550 nm, RX 1310 nm

(standard operating temperature: 0 to 60°C)

ySFP-1G40ALC: WDM-type (BiDi) SFP module with 1 1000BaseSFP port

with LC connector for 40 km transmission; TX 1310 nm, RX 1550 nm

(standard operating temperature: 0 to 60°C)

ySFP-1G40BLC: WDM-type (BiDi) SFP module with 1 1000BaseSFP port

with LC connector for 40 km transmission; TX 1550 nm, RX 1310 nm

(standard operating temperature: 0 to 60°C)

ySFP-1GSXLC-T: SFP module with 1 1000BaseSX port with LC

conncector for 0.5 km transmission (wide operating temperature: -20 to

75°C)

ySFP-1GLXLC-T: SFP module with 1 1000BaseSX port with LC

conncector for 10 km transmission (wide operating temperature: -40 to

75°C)

—3 —

ySFP-1GLHXLC-T: SFP module with 1 1000BaseSX port with LC

conncector for 40 km transmission (wide operating temperature: -40 to

75°C)

ySFP-1GZXLC-T: SFP module with 1 1000BaseSX port with LC

conncector for 80 km transmission (wide operating temperature: -40 to

75°C)

ySFP-1G10ALC-T: WDM-type (BiDi) SFP module with 1 1000BaseSFP

port with LC connector for 10 km transmission; TX 1310 nm, RX 1550 nm