Moxa Technologies TN-5305-T Bedienungsanleitung

P/N: 1802053050012

*1802053050012*

TN-5305 Series

Quick Installation Guide

M12 unmanaged Ethernet switches

Moxa ToughNet Switch

Edition 3.0, July 2016

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The Moxa ToughNet TN-5305 series of 5-port Ethernet switches provides

a hardened and cost-effective solution for your Ethernet connections. The

TN-5305 switches are IP67-rated to provide protection against shock and

foreign particles. IP67-rated products have the following characteristics:

(1) dust proof, (2) protection against the effects of temporary immersion

in water.

The TN-5305 switches have a wide operating temperature range of -40

to75°C, and are designed to withstand a high degree of vibration and

shock. The rugged hardware design makes the TN-5305 switches perfect

for ensuring that your Ethernet equipment can withstand the rigors

associated with critical industrial applications. The switches are rated for

use in hazardous locations and comply with CE/FCC, UL and EN50155

(railway applications) standards.

Package Checklist

Your TN-5305 is shipped with the following items. If any of these items is

missing or damaged, please contact your customer service

representative for assistance.

•Moxa ToughNet Switch.

•Quick Installation Guide (printed).

•Product Warranty Statement.

•3 protective caps for unused ports and 8 port labels.

•Panel Mounting Kit.

Features

High Performance Network Switching Technology

•5 10/100BaseT(X) ports (4-pin shielded M12 socket with D coding).

•Broadcast storm protection.

•IEEE802.3/802.3u/802.3x.

•Store and Forward switching process type.

•10/100M, Full/Half-Duplex, MDI/MDIX auto-sensing.

Industrial Grade Reliability

•Active circuit protection.

•Robust connection.

•Dust and immersion proof.

Rugged Design

•Casing design meets IP67 protection standards.

•M12 connectors for robust connections.

•Operating temperature range of -25 to 60°C, or extended operating

temperature range of -40 to 75°C.

- 3 -

TN-5305 Panel Layouts

Front Panel View

1. M12 port’s 10/100 Mbps LED.

2. 10/100BaseT(X) port (4-pin

female shielded M12 socket

with D coding).

3. Port Label.

4. Power input (5-pin male

shielded M12 socket with A

coding).

5. Power input (PWR) LED.

6. Model name.

7. Holes for attaching the

TN-

5305 to a wall with screws

(there are 3 holes:

bottom left,

bottom right, and top middle)

8. Grounding screws.

Mounting Dimensions (unit = mm)

- 4 -

Panel/Wall Mounting

To mount the TN-5305 on the wall use the 3 screws included in the panel

mounting kit.

STEP 1: Make 3 screw holes on the wall based on the positions of the 3

screw holes on the switch shown in the mounting dimensions diagram.

STEP 2: Insert one screw in the top-middle screw hole on the switch and

screw it into the wall.

STEP 3: Screw in the remaining 2 screws through the bottom-left and

bottom-right holes on the switch.

DIN-Rail Mounting (optional)

Use the optional DIN-Rail mounting kit (DK-M12-305, must be purchased

separately) to mount the TN-5305 on a 35-mm DIN rail.

STEP 1:

Fix the DIN-Rail attachment plate to the rear panel of the switch as shown

in the above figure.

STEP 2:

Position the top hook of the

DIN

-Rail attachment plate to the

top edge of the rail.

STEP 3:

Rotate the switch downwards until

the bottom of the attachment plate

latches onto the bottom edge of the

rail.

To remove the switch from the DIN-Rail, simply reverse Steps 2 and 3

above.

- 5 -

Wiring Requirements

WARNING

Turn the power off before

disconnecting modules or wires. The

correct power supply voltage is listed on the product label. Check

the voltage of your power source to make sure that you are using

the correct voltage. Do NOT use a voltage greater than what is

specified on the product label

These devices must be supplied by a SELV source as defined in

the Low Voltage Directive 2006/95/EC and 2004/108/EC.

ATTENTION

Safety First!

Be sure to disconnect the power cord before installing and/or

wiring your Moxa switch.

This device has UL508 approval.

Use copper conductors only,

60/75°C, Tighten To 4.5

pound-inches. For use in Pollution

Degree 2 Environment.

ATTENTION

Safety First!

Calculate the maximum possible current in each power wire

and

common wire. Observe all electrical codes dictating the

maximum current allowable for each wire size. If the current goes

above the maximum ratings, the wiring could overheat, causing

serious damage to your equipment.

You should also heed the following guidelines:

•Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

NOTE: Do not run signal or communications wiring and power wiring

in the same wire conduit. To avoid interference, wires with different

signal characteristics should be routed separately.

•You can use the type of signal transmitted through a wire to

determine which wires should be kept separate. The rule of thumb is

that wiring that shares similar electrical characteristics can be

bundled together.

•Keep input wiring and output wiring separated.

•It is strongly advised that you label wiring to all devices in the system

when necessary.

- 6 -

Grounding the TN-5305

Grounding and wire routing help

limit the effects of noise due to

electromagnetic interference (EMI).

Run the ground connection from the

ground screw to the grounding

surface prior to connecting devices.

ATTENTION

This product is intended to be mounted to a well

-grounded

mounting surface such as a metal panel.

10/100BaseT(X) Ethernet Port Connection

All TN-5305 models have 5 10/100BaseT(X) Ethernet ports (4-pin

shielded M12 socket with D coding). The 10/100TX ports located on the

TN-5305’s front panel are used to connect to Ethernet-enabled devices.

Most users configure these ports for Auto MDI/MDI-X mode, in which case

the port’s pinouts are adjusted automatically depending on the type of

Ethernet cable used (straight-through or cross-over), and the type of

device (NIC-type or HUB/Switch-type) connected to the port.

In what follows, we give pinouts for both MDI (NIC-type) ports and MDI-X

(HUB/Switch-type) ports. We also give cable wiring diagrams for

straight-through and cross-over Ethernet cables.

Pinouts for sockets on TN-5305

TP Port

Power input

Pin 1

Input V+

Pin 2

Not assigned

Pin 3

Input V-

Pin 4

Not assigned

Pin 5

Chassis ground

- 7 -

Pinouts for RJ45 (8-pin)

RJ45 (8-Pin)

MDI Port Pinouts

MDI-X Port Pinouts

Signal

Tx +

Tx -

Rx +

Rx -

Signal

Rx +

Rx -

Tx +

Tx -

M12 (4-pin, M) to M12 (4-pin, M) Cross-Over Cable Wiring

M12 (4-pin, M) to M12 (4-pin, M) Straight-Trough Cable Wiring

M12 (4-pin, M) to RJ45 (8-pin) Cross-Over Cable Wiring

- 8 -

M12 (4-pin, M) to RJ45 (8-pin) Straight-Trough Cable Wiring

Auto MDI/MDI-X Connection

The Auto MDI/MDI-X function allows users to connect TN-5305’s

10/100BaseTX ports to any kind of Ethernet device, without needing to

pay attention to the type of Ethernet cable being used for the connection.

This means that you can use either a straight-through cable or cross-over

cable to connect the TN-5305 to Ethernet devices.

LED Indicators

Several LED indicators are located on the TN-5305’s front panel. The

function of each LED is described in the table below.

LED

Color

State

Description

PWR AMBER

Power is being supplied to the power

input.

Off

Power is not being supplied to the

power input.

LNK/ACT

(10M) AMBER

TP port’s 10 Mbps link is active.

Blinking

Data is being transmitted at 10 Mbps.

Off

TP port’s 10 Mbps link is inactive.

LNK/ACT

(100M) GREEN

TP port’s 100 Mbps link is active.

Blinking

Data is being transmitted at 100 Mbps.

Off

TP port’s 100 Mbps link is inactive.

Auto-Negotiation and Speed Sensing

All of the TN-5305’s Ethernet ports independently support

auto-negotiation for speeds in the 10BaseT and 100BaseTX modes, with

operation according to the IEEE 802.3u standard. This means that some

nodes could be operating at 10 Mbps, while at the same time, other nodes

are operating at 100 Mbps.

Auto-negotiation takes place when an M12 cable connection is made, and

then each time a LINK is enabled. The TN-5305 advertises its capability

for using either 10 Mbps or 100 Mbps transmission speeds, with the

device at the other end of the cable expected to advertise in the same way.

Depending on what type of device is connected, this will result in

agreement to operate at a speed of either 10 Mbps or 100 Mbps.

If a TN-5305’s Ethernet port is connected to a non-negotiating device, it

will default to 10 Mbps speed and half-duplex mode, as required by the

IEEE 802.3u standard.

- 9 -

Specifications

Technology

Standards

IEEE 802.3, 802.3u, 802.3x

Processing Type

Store and Forward, with IEEE802.3x full duplex,

back pressure flow control

Interface

M12 Ports

10/100BaseTX auto negotiation speed, F/H

duplex mode, and auto MDI/MDI-X connection

LED Indicators

Power, LNK/ACT

Power

Input Voltage

24 VDC (12 to 45 VDC) or

18 to 30 VAC (47 to 63 Hz)

Input Current

0.28 A @ 24 VAC

0.10 A @ 24 VDC

0.08 A @ 36 VDC

Connection

M12 A-coding 5-pin male connector, single power

input

Protection

Overload current

protection / Limited

current

1.1A

Reverse polarity

protection

present

Mechanical

Casing

IP67 protection, plastic case

Dimensions

(W x H x D)

60 x 125 x 29.6 mm (2.4 x 4.9 x 1.2 in)

Weight

270g

Installation

Panel mounting,

DIN-Rail mounting (with optional kit)

Environment

Operating

Temperature

-25 to 60°C (-13 to 140°F) for standard model,

-40 to 75°C (-40 to 167°F) for -T models

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating relative

humidity

5 to 95%

(non-condensing)

Regulatory Approvals

Safety

UL 508

Rail Traffic

EN 50155

Maritime

IEC 61000

-4-2 ESD: Contact: 6 kV; Air: 8 kV

IEC 61000

-4-3 RS: 80 MHz to 1 GHz: 20 V/m

IEC 61000

-4-4 EFT: Power: 2 kV; Signal: 2 kV

IEC 61000

-4-

5 Surge: Power: 2 kV; Signal: 2 kV

IEC 61000

-4-6 CS: 10 V

IEC 61000

-4-8

Shock: EN 50155, IEC 61373

Freefall: IEC 60068

-2-32

Vibration: EN 50155, IEC 61373

Note: Please check Moxa’s website for the most up-to-date certification

status.

MTBF (mean time between failures)

Time

3,451,678 hrs.

Database

Telcordia (Bellcore), GB 25°C

WARRANTY

5 years

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Schalten Handbücher

Moxa Technologies

Moxa Technologies ToughNet TN-5510-2GLSX-ODC Handbuch

Moxa Technologies

Moxa Technologies EDS-G4014 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies PT-7828 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-4009 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies PT-G7509 Handbuch

Moxa Technologies

Moxa Technologies PT-7528 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-518A-T Handbuch

Moxa Technologies

Moxa Technologies RKS-G4028 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ToughNet TN-5508 Series Handbuch

Moxa Technologies

Moxa Technologies ToughNet TN-5510A-2GLSX-ODC Handbuch

Moxa Technologies

Moxa Technologies EDS-G509 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TN-5308 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-508 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-728 Series Handbuch

Moxa Technologies

Moxa Technologies IKS-6324 Series Handbuch

Moxa Technologies

Moxa Technologies IKS-6726-8PoE Series Handbuch

Moxa Technologies

Moxa Technologies EDS-726 Series Handbuch

Moxa Technologies

Moxa Technologies ToughNet TN-4500A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ToughNet TN-4500A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort S8000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TRC-190 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-G205-T Handbuch

Moxa Technologies

Moxa Technologies PowerTrans PT-7528-24TX-WV Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-P206A-4PoE Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch