Moxa Technologies ToughNet TN-5510A-2GLSX-ODC Handbuch

Reproduction without permission is prohibited.

P/N: 1802055100061

*1802055100061*

TN-5510A-2GLSX-ODC and

TN-5510A-8POE-2GLSX-ODC

Hardware Installation Guide

Moxa ToughNet Switch

Second Edition, March 2015

www.ipc2u.ru

www.moxa.pro

- 2 -

Overview

The ToughNet TN-5510A-2GLSX-ODC and TN-5510A-8POE-2GLSX-ODC

series M12 managed Ethernet switches are designed for industrial

applications in harsh environments. The TN series switches use M12

connectors to ensure tight, robust connections, and guarantee reliable

operation against environmental disturbances, such as vibration and

shock. The wide 24 to 110 VDC range with dual power inputs (non-PoE

series) increases the reliability of your communications.

The TN-5510A-2GLSX-ODC and TN-5510A-8PoE-2GLSX-ODC switches

provide up to 8 Fast Ethernet M12 ports, and 2 ports on the down side to

provide the Gigabit fiber interface with an embedded 2 km multimode

fiber transceiver. Moreover, the -40 to 75°C operating temperature and

IP54-rated waterproof enclosure allow deployment in harsh

environments. The TN-5510A Ethernet switch is compliant with the

essential sections of EN 50155 (railway applications), making it suitable

for a variety of industrial applications.

Package Checklist

The ToughNet TN-5510A-2GLSX-ODC and TN-5510A-8POE-2GLSX-ODC

switches are shipped with the following items. If any of these items are

missing or damaged, please contact your customer service

representative for assistance.

•1 Moxa ToughNet switch

•M12 to DB9 console port cable

•2 protective caps for console and relay output ports

•Panel mounting screws

•CD-ROM with user’s manual

•Hardware installation guide

•Warranty card

Features

Anti-Vibration Circular Connectors for Robust Links

•M12 D-coding 4-pin female connectors for Fast Ethernet

10/100BaseT(X) ports

•Fiber-optic ODC connectors with embedded 2 km Gigabit Ethernet

1000BaseLSX

•M12 A-coding 5-pin male connectors for console and relay output

•M23 6-pin male connector for power input

Dual Power Inputs

•Supports 24-110 VDC (16.8 to 137.5 VDC)

High Performance Network Switching Technology

•IEEE 1588 PTP (Precision Time Protocol) for precise time

synchronization of networks

•DHCP Option 82 for IP address assignment with different policies

•EtherNet/IP and Modbus/TCP industrial Ethernet protocols supported

•Turbo Ring and Turbo Chain (recovery time <20 ms @250 switches),

and STP/RSTP/MSTP for network redundancy

•IGMP Snooping and GMRP for filtering multicast traffic from industrial

Ethernet protocols

•Port-based VLAN, IEEE802.1Q VLAN, and GVRP protocol to ease

network planning

www.ipc2u.ru

www.moxa.pro

- 3 -

•QoS (IEEE 802.1p/1Q and ToS/DiffServ) allows real-time traffic

classification and prioritization

•802.3ad, LACP for optimum bandwidth utilization

•TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance

network security

•SNMP v1/v2c/v3 for different levels of network management

•RMON for efficient network monitoring and proactive capability

•Bandwidth management prevents unpredictable network status

•Lock port allows access by only authorized MAC addresses

•Port mirroring for online debugging

•Automatic warning by exception through email, relay output

•Automatic recovery of connected device’s IP addresses

•Line-swap fast recovery

•LLDP for automatic topology discovery in network management

software

•Loop protection prevents network loops

•Configurable through Web browser, Telnet/serial console, CLI, and

Windows utility

Designed for Industrial-Specific Applications

•Two Gigabit fiber ports to meet high EMI immunity, long-distance,

and bandwidth requirements

•Essential compliance with EN 50155

•-40 to 75°C operating temperature range

•IP54, rugged high-strength case

•Panel mounting or DIN rail mounting installation capability

Recommended Optional Accessories

•CBL-M23(FF6P)Open-BK-100-IP67: 1-meter M23 to 6-pin power

cable with IP67-rated female 6-pin M23 connector

•CBL-M12D(MM4P)/RJ45-100 IP67: 1-meter M12-to-RJ45 Cat-5E UTP

Ethernet cable with IP67-rated male 4-pin M12 D-coded connector

•CBL-M12(FF5P)/OPEN-100 IP67: 1-meter M12-to-5-pin power cable

with IP67-rated female 5-pin M12 A-coded connector

•M12D-4P-IP68: Field-installable M12 D-coded screw-in connector,

male 4-pin, IP68-rated

•M12A-5P-IP68: Field-installable M12 A-coded screw-in connector,

female 5-pin, IP68-rated

•CAP-M12F-M: Metal cap for M12 female connector

•DK-DC50131: DIN rail mounting kit, 50 x 131 mm

www.ipc2u.ru

www.moxa.pro

- 4 -

TN-5510A-2GLSX-ODC Panel Layouts

1. Screw holes for panel mounting kit

2. Console port

3. Grounding screw

4. Relay output port

5. Power input voltage range indicator

6. Power input port (male 6-pin shielded M23 connector)

7. PWR1 LED: for power input 1

www.ipc2u.ru

www.moxa.pro

- 5 -

8. PWR2 LED: for power input 2

9. FAULT LED

10. MSTR/HEAD LED: for ring master or chain head

11. CPLR/TAIL LED: for ring coupler or chain tail

12. TP port’s 10/100 Mbps LED

13. 10/100BaseT(X) port (female 4-pin shielded M12 connector with D

coding)

14. Waterproof vent

15. Product label

16. 12 screw holes for DIN rail mounting kit

17. E2 LED: Down-side E2 Gigabit port’s 1000 Mbps LED

18. E1 LED: Down-side E1 Gigabit port’s 1000 Mbps LED

19. Gigabit fiber port E1 (corresponding to port 9 in the TN-5510A User’s

Manual)

20. Gigabit fiber port E2 (corresponding to port 10 in the TN-5510A

User’s Manual)

ATTENTION

Please DO NOT open or remove vent 15. The warranty will be

invalid if the seal is removed.

All exposed connectors, including 3, 5, 7, and 14, should be

tightly covered by protective caps when they are not in use to

ensure IP54 protection.

www.ipc2u.ru

www.moxa.pro

- 6 -

Mounting Dimensions (unit = mm)

TN-5510A-2GLSX-ODC Series

www.ipc2u.ru

www.moxa.pro

- 7 -

TN-5510A-8PoE-2GLSX-ODC Series

www.ipc2u.ru

www.moxa.pro

- 8 -

Panel/Wall Mounting

STEP 1:

Mounting the TN-5510A to a wall requires 4 screws. Use the ToughNet

switch as a guide to mark the correct positions of the 4 screws.

STEP 2:

Use the 4 screws in the panel

mounting kit. If you would like to use

your own screws, make sure the

screw head is between 6.0 mm

and 7.0 mm in diameter and the

shaft is less than 4.0 mm in

diameter, as shown at the right.

Do not screw the screws in all the way—leave a space of about 2 mm to

allow room for sliding the ToughNet switch between the wall and the

screws.

NOTE

Before tightening the screws into the wall, make sure the screw

head and shaft size are suitable by inserting the screw through

one of the keyhole-shaped apertures of the ToughNet switch.

STEP 3:

Once the screws are fixed in the wall, hang the ToughNet switch on the 4

screws through the large opening of the keyhole-shaped apertures, and

then slide the switch downwards. Tighten the four screws for added

stability.

NOTE

To provide greater protection from vibration and shock, use

screws with shaft diameter between 6.0 mm and 7.0 mm, and fix

the ToughNet switch onto the wall directly through the large

opening of the keyhole-shaped apertures.

www.ipc2u.ru

www.moxa.pro

- 9 -

DIN Rail Mounting (optional)

Use a pair of optional DK-DC50131 DIN

rail mounting kits (must be purchased

separately) to mount the TN-5510A on

a 35 mm DIN rail.

STEP 1:

Use 12 screws (6 screws per plate) to

attach the two DIN rail attachment

plates to the rear panel of the switch.

STEP 2:

If the spring-loaded bracket is locked in place, push the recessed button

to release it. Once released, you should feel some resistance from the

spring as you slide the bracket up and down a few millimeters in each

direction.

STEP 3:

Insert the top of the DIN rail into

the top slot of the DIN rail

attachment plates.

STEP 4:

The DIN rail attachment plates will

snap into position, as shown in the

figure below.

To remove the Moxa ToughNet Switch from the DIN rail, use a

screwdriver to pull down the bottom parts of the two spring-loaded

brackets until they are fixed in the “locked” position, and then reverse

Steps 3 and 4 above.

www.ipc2u.ru

www.moxa.pro

- 10 -

Wiring Requirements

WARNING

Turn the power off before disconnecting modules or wires. The

correct power supply voltage is listed on the product label. Check

the voltage of your power source to make sure you are using the

correct voltage. Do NOT use a voltage greater than what is

specified on the product label.

These devices must be supplied by a SELV source as defined in

the Low Voltage Directive 2006/95/EC and 2004/108/EC.

ATTENTION

Safety First!

Observe all electrical codes dictating the maximum current

allowable for each wire size. If the current goes above the

maximum ratings, the wiring could overheat, causing serious

damage to your equipment.

ATTENTION

Safety First!

Be sure to disconnect the power cord before installing and/or

wiring your Moxa switch.

This device has UL 508 approval. Use copper conductors only,

60/75°C, and tighten to 4.5 pound-inches. For use in pollution

degree 2 environments.

Please read and follow these guidelines:

•Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

NOTE

Do not run signal or communications wiring and power wiring

through the same wire conduit. To avoid interference, wires with

different signal characteristics should be routed separately.

•You can use the type of signal transmitted through a wire to

determine which wires should be kept separate. The rule of thumb is

that wiring that shares similar electrical characteristics can be

bundled together.

•Keep input wiring and output wiring separated.

•It is strongly advised that you label wiring for all devices in the system

when necessary.

www.ipc2u.ru

www.moxa.pro

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Schalten Handbücher

Moxa Technologies

Moxa Technologies TN-5308-LV-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-208 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IKS-6726-8PoE Series Handbuch

Moxa Technologies

Moxa Technologies EDS-G308 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ToughNet TN-5524-8PoE Handbuch

Moxa Technologies

Moxa Technologies EDS-516A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICS-G7748A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies SPL-24 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPORT 6610 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-516A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-518A Series Handbuch

Moxa Technologies

Moxa Technologies UPort 404 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-G308 Handbuch

Moxa Technologies

Moxa Technologies ToughNet TN-G4500 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies SDS-3016 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MDS-G4000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-508 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-P506A-4PoE Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TN-5516A Series Handbuch

Moxa Technologies

Moxa Technologies ToughNet TN-5508 Series Handbuch

Moxa Technologies

Moxa Technologies EDS-405A Handbuch

Moxa Technologies

Moxa Technologies EDS-408A Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-208A series Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-4009 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung