MRC TM-196 Bedienungsanleitung
RF three-Axis
Field Strength Meter
TM-196
User’s
Manual
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION
3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529
MRC. 3.20
Table of Contents
Axis RF Meter Quick Start Guide .................... 1
1Introduction ............................................... 2
2Simple a method of operation.................. 2
3Fundamentals............................................ 3
4Electric field strength (E).......................... 3
4.1Magnetic field strength (H)......................... 3
4.2Power density (S) ...................................... 4
4.3The characteristic of electromagnetic fields
.............................................................……….4
5Application................................................. 5
6Features ..................................................... 6
7Identifying Parts ........................................ 8
8LCD Description........................................ 9
9Specifications.......................................... 10
9.1 General specifications............................. 10
9.2 Electrical specifications........................... 12
9.3 Units of measurement............................. 13
9.4 Result modes.......................................... 13
Measurement Procedures and Preparation . 14
9.5 POWER key............................................ 15
9.6 Data hold key.......................................... 15
9.7 Units key: ................................................ 16
9.8 MAX / AVG Record ................................. 16
9.9 Manual data memory storing .................. 17
9.10 XYZ/CALL............................................. 17
9.11 Alarm ON/OFF Setup ............................ 17
9.11.1 Viewing Data Records........................ 18
9.12 Cancel the automatic power off/on........ 18
9.13 Clock LCD Display ................................ 19
10 Setup Mode.............................................. 19
10.1 Clock Setup-1 ....................................... 20
10.2 Setting the alarm limit value (ALARM)-2
……………………………………….......21
10.3 DEL data logger memory setup-3 ......... 22
10.4 Analogue bar graphsetup-4................... 23
10.5 Auto Power Off Time function setup-5... 23
10.6 Setting the calibration factor (CAL)-6 .... 24
11 Calibration factor is important for the
measurements......................................... 25
11.1 Short-term measurements..................... 26
11.2 Short-term measurements..................... 26
11.3 Long-term exposure measurements...... 27
12 Battery replacement................................ 27
13 External DC Power.................................. 28
14 Safety Precaution.................................... 29
15 SAFETY INFORMATION.......................... 30
16 SAFETY INFORMATION.......................... 31
17 End of life................................................. 32
EN-1
Axis RF Meter Quick Start Guide
This meter has many capabilities,
including memory, alarm, date/time,
average etc. which will require some study
of the manual to use properly. However,
you can quickly and easily begin making
measurements right out of the box. Just
follow these simple steps:
1. Insert 9V battery.
2. Turn meter on with GREEN button.
3. Press XYX/MEM button until all three
(XYZ) letters are displayed on the
screen (to the left of the main number.
4. Press UNIT/ENTER button until the
desired units are displayed below the
main number (we recommend using
mV/m… and we recommend a
maximum level of 614 mV/m for
prolonged exposure).
You are now ready to make your first
measurements!
EN-2
1 Introduction
This meter is designed for measuring and
monitoring Radio–Frequency
electromagnetic field strength. The meter
is calibrated precisely over the frequency
range of 10MHz~8GHZ.
2 Simple a method of operation
Press “power” button on.To change
measuring unit (mV/m), push UNIT”button to
change the unit.Electric field strength
(V/m).Computed magnetic field strength
(mA/m).Computed power density
(mW/m2).Computed power density
(μW/cm2).
Press "xyz” this key to change sensor axis
selector:
“All axis ” →“X axis” →“Y axis” →“Z
axis”.
EN-3
3 Fundamentals
Electromagnetic pollution
This meter is used to indicate electromagnetic
pollution generated artificially. Wherever there
is a voltage or a current, electric (E) and
magnetic (H) fields arise. All types of radio
broadcasting and TV transmitters produce
electromagnetic fields, and they also arise in
industry, business and the home, where they
affect us even if our sense organs perceive
nothing.
4 Electric field strength (E)
Afield vector quantity that represents the force
(F) on an infinitesimal unit positive
test charge (q) at a point divided by that charge.
Electric field strength is expressed in units of
volts per meter (mV/m). This meter measures
electric field strength directly.
4.1 Magnetic field strength (H)
Afield vector that is equal to the magnetic flux
density divided by the permeability of the
medium Magnetic field strength is expressed in
units of amperes per meter
(A/m). In far field situations, one can
EN-4
calculate the magnetic field for the electric
field value. This meter can display the
calculated magnetic field strength.
4.2 Power density (S)
Power per unit area normal to the direction
of propagation, usually expressed in units
of watts per square meter (W/m2) or, for
convenience, units such as mill watts per
square centimeter (mW/cm2)
4.3 The characteristic of electromagnetic
fields
Electromagnetic fields propagate as
waves and travel at the speed of light (C).
The wavelength is proportional to the
frequency.
λ(wavelength) = C (speed of light) /
f (frequency)
If the distance to the field source is less
than three wavelengths, then we are
usually in the near field. If the distance is
more than three wavelengths, the far-field
conditions usually hold.
In near field conditions, the magnetic field
value cannot be calculated from the
electric field value. This meter is designed
for reliable far field measurements only.
EN-5
5 Application
Quite often routine, maintenance and
service work has to be done in areas
where active electromagnetic fields are
present, e.g. in broadcasting stations,
etc. Additionally, other employees may
be exposed to electromagnetic radiation.
In such cases, it is essential that
personnel be not exposed to dangerous
levels of electromagnetic radiation, such
as:
High frequency (RF) electromagnetic
wave field strength measurement.
Mobile phone base station antenna
radiation power density measurement.
Wireless communication applications
(CW, TDMA, GSM, DECT).
RF power measurement for transmitters.
Wireless LAN (Wi-Fi) detection,
installation.
Spy camera, wireless bug finder.
Cellular /Cordless phone radiation safety
level.
Microwave oven leakage detection.
Personal living environment EMF safety.
EN-6
6 Features
The meter is a broadband device for
monitoring high- frequency radiation in
the range from10MHz to 8GHz
The non-directional electric field antenna
and high sensitivity also allow
measurements of electric field strength in
TEM cells and absorber rooms.
The unit of measurement and the
measurement types have been selected
to expressed in units of electrical and
magnetic field strength and power
density.
At high frequencies, the power density is
of particular significance. It provides a
measure of the power absorbed by a
person exposed to the field. This power
level must be kept as low as possible at
high frequencies.
The meter can be set to display the
instantaneous value, the maximum value
measured or the average value.
Instantaneous and maximum value
measurements are useful for orientation,
e.g. when first entering an exposed area.
EN-7
For isotropic measurements of
electromagnetic fields.
Non-directional (isotropic) measurement
with three-channel measurement
sensor.
High dynamic range due to three-
channel digital results processing.
Configurable alarm threshold and
memory function.
Easy & safe to use
Low battery detector “ ”.
Manual data memory storing: 200 data
sets.
Memory Over load indication “OL”.
Inhaltsverzeichnis
Andere MRC Messgerät Handbücher
MRC
MRC PH-230SD Bedienungsanleitung
MRC
MRC WA-2017SD Bedienungsanleitung
MRC
MRC INE-PHS-3E Bedienungsanleitung
MRC
MRC FG-6020SD Bedienungsanleitung
MRC
MRC O2H-9903SD Bedienungsanleitung
MRC
MRC EMF-840 Bedienungsanleitung
MRC
MRC PAM-9212SD Bedienungsanleitung
MRC
MRC HE2 Series Bedienungsanleitung
MRC
MRC AM-4233SD Bedienungsanleitung
MRC
MRC PSA-311 Bedienungsanleitung
MRC
MRC DO-5510HA Bedienungsanleitung
MRC
MRC LX-1108 Bedienungsanleitung
MRC
MRC DO-5510 Bedienungsanleitung
MRC
MRC MG-3002 Bedienungsanleitung
MRC
MRC UT-FLU5B Bedienungsanleitung
MRC
MRC CALI-1200HN Bedienungsanleitung
MRC
MRC MS-7004SD Bedienungsanleitung
MRC
MRC DW-6163 Bedienungsanleitung
MRC
MRC CD-4303 Bedienungsanleitung
MRC
MRC PS-9302 Bedienungsanleitung
