MRC PVB-820 Bedienungsanleitung
Acceleration, Velocity
RMS measurement, Metric & Imperial unit
PEN VIBRATION METER
Model : PVB-820
Your purchase of this PEN
VIBRATION METER marks
a step forward for you into
the field of precision
measurement. Although
this METER is a complex
and delicate instrument, its
durable structure will allow
many years of use if
proper operating
techniques are developed.
Please read the following
instructions carefully and
always keep this manual
within easy reach.
OPERATION MANUAL
3, Hagavish st. Israel 58817 Tel: 972 35595252, Fax: 972 3 5594529
MRC.7.20
TABLE OF CONTENTS
1 FEATURES................................................................
.
1
2 SPECIFICATIONS......................................................
.
2
2-1 General Specifications..........................................2
2-2 Electrical Specifications........................................3
3 FRONT PANEL DESCRIPTION.....................................5
3-1 Display...............................................................
.
5
3-2 Power Button...................................................... 5
3-3 Hold Button .......................................................
.
5
3-4 Function Button ..................................................5
3-5 Battery Cover/Compartment.................................5
3-6 Vibration Sensor..................................................5
3-7 Sensin
g
head......................................................
.
5
3-8 Ma
g
netic base.....................................................5
4.MEASURING PROCEDURE.......................................... 6
5.ZERO ADJUSTMENT PROCEDURE...............................9
6. BATTERY REPLACEMENT...........................................10
7. CARRYING CASE ( included ).....................................10
8. CLASSIFICATION RANGES.........................................11
9. SENSITIVITY RELATIVE TABLE ACCORDING
ISO 2954..................................................................12
1. FEATURES
*Applications for industrial vibration monitoring :
All industrial machinery vibrates. The level of vibration is
a useful guide to machine condition. Poor balance,
misalignment & looseness of the structure will cause the
vibration level increase, it is a sure sign that the
maintenance is needed.
* Pen type digital vibration meter, vibration sensor is built
in, all in one.
* Acceleration, Velocity measurement, RMS measurement
value.
* Metric & Imperial display unit
* Frequency range 10 Hz - 1 kHz, sensitivity relative meet
ISO 2954.
* Microcomputer circuit, intelligent function, high accuracy.
* LCD display, easy read out.
* Complete set with the Test pin and the Magnetic base
are the standard accessories.
* Built-in low battery indicator.
* Heavy duty & compact housing case.
* IP65 protection.
* Compact size, light weight.
* Soft carrying case is the optional accessory
1
2. SPECIFICATIONS
2-1 General Specifications
Display LCD, size : 20 mm x 28 mm.
Measurement Velocity, Acceleration.
* RMS value.
Function Acceleration
, g,
Velocity mm/s, cm/s, inch/s
Frequency 10 Hz to 1 KHz
range
* Sensitivity relative during the
the frequency range meet ISO 2954
Refer to table 1, page. 12.
Circuit Exclusive microcomputer circuit.
Zero adjust Build in the Zero adjustment VR,
easy to make adjustment.
Sampling time Approx. 1 second.
Operating 0 to 50 ( 32 to 122 ).℃℉
temperature
Operating Less than 80% RH.
humidity
Power supply DC 1.5V battery ( UM-4/AAA ) x 4 PCs.
Power Approx. DC 12 mA.
consumption
Weight 240 g ( 0.53 lb ).
Dimension Meter :
175 x 40 x 32 mm
( 6.9 x 1.6 x 1.3 inch ).
*Meter without sensing head,
Sensing head :
Round 9 mm Dia. x 30 mm.
Accessories Instruction manual.................. 1 PC.
included Meter with sensin
g
head.......... 1 Set
Ma
g
netic base......................... 1 PC.
Soft carryin
g
case, CA-52A......
.
1 PC.
2
2-2 Electrical Specifications
Acceleration ( RMS )
Unit
Range 0.5 to 199.9
Resolution 0.1
Accuracy ± ( 5 % + 2 d ) reading
@ 160 Hz, 80 Hz, 23 ± 5 ℃
Calibration
50 ( 160 Hz )
Point
Unit g
@ 1 g = 9.8
Range 0.05 to 20.39 g
Resolution 0.01 g
Accuracy ± ( 5 % + 2 d ) reading
@ 160 Hz, 80 Hz, 23 ± 5 ℃
Calibration
50 ( 160 Hz )
Point
Unit
Range 2 to 656
Resolution 1
Accuracy ± ( 5 % + 2 d ) reading
@ 160 Hz, 80 Hz, 23 ± 5 ℃
Calibration
50 ( 160 Hz )
Point
3
Velocity ( RMS )
Unit mm/s
Range 0.5 to 199.9 mm/s
Resolution 0. 1 mm/s
Accuracy ± ( 5 % + 2 d ) reading
@ 160 Hz, 80 Hz, 23 ± 5 ℃
Calibration 50 mm/s ( 160 Hz )
Point
Unit cm/s
Range 0.05 to 19.99 cm/s
Resolution 0. 01 cm/s
Accuracy ± ( 5 % + 2 d ) reading
@ 160 Hz, 80 Hz, 23 ± 5 ℃
Calibration 50 mm/s ( 160 Hz )
Point
Unit inch/s
Range 0.02 to 7.87 inch/s
Resolution 0.01 inch/s
Accuracy ± ( 5 % + 2 d ) reading
@ 160 Hz, 80 Hz, 23 ± 5 ℃
Calibration 50 mm/s ( 160 Hz )
Point
4
3. FRONT PANEL & LAYOUT
DESCRIPTION
Fig. 1
3-1 Display
3-2 Power Button
3-3 Hold Button
3-4 Function Button
3-5 Battery Cover/Compartment
3-6 Vibration Sensor
3-7 Sensing Head
3-8 Magnetic Base
5
4. MEASURING PROCEDURE
1)Attaching Meter Body with the Sensing head
a. Connect (Screw )the " Sensing Head " ( 3-7, Fig. 1 to
the bottom of the " Vibration Sensor " ( 3-6, Fig. 1 ).
b. Hold the meter's body by hand loosely. Touch
the front pin of the "Sensing head " to the area
that you intend to measure the vibration value.
For best results: The Meter body
should be perpendicular with the
measurement surface area.
Measurement area
6
2)Cooperate with the Magnetic base
a. If the measuring surface is a ferrous material, you
may consider using the " Magnetic base " ( 3-8,
Fig. 1 )on the " Measurement area ", screw the "
Magnetic base " (3-8, Fig. 1) to the bottom of "
Vibration sensor " ( 3-6, Fig. 1 ).
For best results: The Meter body
should be perpendicular with the
measurement surface area.
Magnetic base
Measurement area
7
3)Function Selection
Select the desired function by pressing the " Function
Button " ( 3-4, Fig. 1 ) once the measurement
Function will be present in sequence.
Measurement Metric unit Imperial unit
Acceleration , g
Velocity mm/s, cm/s inch/s
The Display will show the indicator :
ACC
ACC : Acceleration
ACC g
VEL : Velocity
ACC
VEL mm/s
VEL cm/s
VEL inch/s
4)Power ON :
Power on the meter by pressing the " Power Button
" ( 3-2, Fig. 1 ) once, the LCD Display ( 3-1, Fig. 1 ) will
light up, the meter is ready for the measurement.
5)Data Hold :
During the measurement, push the "Hold button"
( 3-3, Fig. 1 ) to hold the measured value,
the LCD will indicate the " HOLD " symbol.
Push the " Data hold button " again to release the data
hold function and the " HOLD " symbol will be
removed.
8
Inhaltsverzeichnis
Andere MRC Messgerät Handbücher
MRC
MRC HT-3027SD Bedienungsanleitung
MRC
MRC CD-4307SD Bedienungsanleitung
MRC
MRC RSW-923 Bedienungsanleitung
MRC
MRC PS-9303SD Bedienungsanleitung
MRC
MRC EMF-840 Bedienungsanleitung
MRC
MRC BCT-4308 Bedienungsanleitung
MRC
MRC CLRM-200 Bedienungsanleitung
MRC
MRC HD-3008 Bedienungsanleitung
MRC
MRC UT-FLU5B Bedienungsanleitung
MRC
MRC PH-230SD Bedienungsanleitung
MRC
MRC PS-9302 Bedienungsanleitung
MRC
MRC PM-9100 Bedienungsanleitung
MRC
MRC O2H-9903SD Bedienungsanleitung
MRC
MRC INE-DZB-712 Bedienungsanleitung
MRC
MRC CC-423 Installationshandbuch
MRC
MRC WA-2017SD Bedienungsanleitung
MRC
MRC PM-1064SD Bedienungsanleitung
MRC
MRC TM-8812 Bedienungsanleitung
MRC
MRC INE-PHB-4 Bedienungsanleitung
MRC
MRC CD-4309 Bedienungsanleitung
