Mru HC40X Bedienungsanleitung

HC40X

RM400

RF400

CO400

CD400

Hand detector probe

USER MANUAL

1112EN

USER MANUAL 400DH

2 / 41 MRU GmbH, D-74172 Neckarsulm

Manufacturer:

Legal notices / Intellectual property rights comments

Original user manual

No part of this manual may be published in any form (print, photocopy, electronic media or

any other publication form) without a written approval by the publisher.

All user trademarks and name mark descriptions, even those which are not marked as such,

are properties of the respective owners.

Edition: 2021-01-13, V1.00.EN

USER MANUAL 400DH

MRU GmbH, D-74172 Neckarsulm 3 / 41

Table of content

1Security and safety directions for the analyzer ........................... 5

1.1. Safety manual .................................................................................................5

1.2. Safety precautions.........................................................................................5

2Introduction...................................................................................... 6

2.1. Intended Use...................................................................................................6

2.2. The company MRU .......................................................................................8

3Description........................................................................................ 9

3.1. Connecting Detector Hand Probe 400DH with analyser. ...............9

3.2. Inserting interchangeable Sensor............................................................9

3.3. Terms and window designation............................................................ 10

3.4. Context menu .............................................................................................. 10

4Measuring ....................................................................................... 12

4.1. Measuring with interchangeable sensor HC40X............................. 12

Starting measurement...................................................................................... 12

Open context menu .......................................................................................... 13

Setting alarm thresholds and units.............................................................. 14

4.2. Measuring with interchangeable sensor RM400 ............................ 16

Starting measurement...................................................................................... 16

Open context menu .......................................................................................... 17

4.3. Measuring with interchangeable sensor RM400 ............................ 19

Starting measurement...................................................................................... 19

Open context menu .......................................................................................... 19

Setting units ......................................................................................................... 20

4.4. Measurement with interchangeable sensor IR400......................... 21

Starting measurement...................................................................................... 21

Open context menu .......................................................................................... 22

Setting Alarm threshold, Unit and Emissivity........................................... 22

4.5. Measurement with interchangeable sensor RF400........................ 25

Starting measurement...................................................................................... 25

Open context menu .......................................................................................... 26

Settings Alarm threshold................................................................................. 26

4.6. Measurement with interchangeable sensor CO400 ...................... 29

Starting measurement...................................................................................... 29

Open context menu .......................................................................................... 29

Setting alarm threshold and unit.................................................................. 30

USER MANUAL 400DH

4 / 41 MRU GmbH, D-74172 Neckarsulm

4.7. Measurement with interchangeable sensor CD400.......................31

Starting measurement......................................................................................31

Open context menu...........................................................................................32

Settings units .......................................................................................................33

5Technical data.................................................................................34

Interchangeable Sensor HC400 (Nr.11138)...............................................34

Interchangeable Sensor HC401 (Nr.11591)...............................................34

Interchangeable Sensor HC402 (Nr.11733)...............................................35

Interchangeable Sensor RM400 (Nr.11191)..............................................36

Interchangeable Sensor IR400 (Nr.12121)................................................. 36

Interchangeable Sensor HM400 (Nr.11922) .............................................36

Interchangeable Sensor RF400 (Nr.11900)................................................ 37

Interchangeable sensor CO400 (Nr.12130)...............................................38

Interchangeable sensor CD400 (Nr.12623)...............................................39

6Declaration of conformity.............................................................40

USER MANUAL 400DH

MRU GmbH, D-74172 Neckarsulm 5 / 41

1Security and safety directions for the analyzer

1.1. Safety manual

All general information and safety precautions of MRU products are listed in

the supplied separate safety manual.

Therefore, this manual must be read and observed before the first use of the

analyzer.

Instrument-specific safety and warning requirements in this manual are

prefixed before dangerous actions

1.2. Safety precautions

The used categories of safety precautions are here explained once more

DANGER

Identifies an immediate, impending hazard that, if ignored,

will result in severe bodily injuries or death.

WARNING

Identifies an immediate, impending hazard that, if ignored,

may result in severe bodily injuries, material damage or death.

CAUTION

Identifies a possibly dangerous situation that, if ignored, may

result in minor injuries.

ATTENTION

Identifies a possibly harmful situation that, if ignored, may re-

sult in damages to the device or its surroundings.

NOTE

Identifies user tips and other especially important information.

The explanation of safety notices:

CAUTION

HOT –danger of burns and fire hazards from gas

extraction probe.

Physical harm and property damage can be caused.

►Cool down the probe tube.

USER MANUAL 400DH

6 / 41 MRU GmbH, D-74172 Neckarsulm

2Introduction

•Read and observe the safety manual supplied separately.

•This user manual enables you to operate the Hand Detector Probe

400DH safely.

•Read this user manual carefully.

•Make yourself familiar with the Hand Detector Probe 400DH, before

using it.

•Pay special attention to the security and warning precautions, in

order to prevent injuries and product damages.

•We can’t be held responsible for damages or injuries, by not follow-

ing the instructions in this manual.

•Always keep this user manual near you, when working with the Hand

Detector Probe 400DH, to be able to read instructions as needed.

•Ensure to hand over all documents to when handing the Hand Detec-

tor Probe 400DH over to others.

NOTE

This user manual only describes the Hand Detector

Probe 400DH and the available interchangeable

sensors. To operate your analyser, read the corre-

sponding user manual.

2.1. Intended Use

Due to interchangeable sensors, the Hand Detector Probe 400DH can

be used for a wide range of applications:

•Usable with interchangeable sensor RM400 for leak detection on ex-

haust pipes.

•Usable with interchangeable sensor HC400, HC401 and HC402 for

leak detection on gas lines in non-explosive environments.

•Usable with interchangeable sensor RF400 for leak detection on

refrigeration systems.

•Usable with interchangeable sensor HM400 to measure environmen-

tal parameters (air pressure, humidity, air temperature and dew

point).

•Usable with interchangeable sensor CO400 for monitoring the CO-

concentration in the ambient air.

•Usable with interchangeable sensor CD400 for monitoring the CO2-

concentration in the ambient air.

Note that all interchangeable sensors are developed for indoor use only.

►Do not use the interchangeable sensors outdoor.

USER MANUAL 400DH

MRU GmbH, D-74172 Neckarsulm 7 / 41

The Hand Detector Probe 400DH records the measured values and

displays them on the connected analyser for further processing.

The Hand Detector Probe 400DH cannot be used for personal protec-

tion or continuous monitoring tasks.

The Hand Detector Probe 400DH was manufactured according to rel-

evant standards and regulations. The Hand Detector Probe must be

used according to the instructions for the intended used.

WARNING

Risk from manipulations to the measuring device

Operational safety hazard

Modifications or changes to the measuring device

are not allowed.

The Hand Detector Probe 400DH must not be modified in terms of

construction or safety. Modifications of this kind by the user will in-

validate the declaration of conformity

USER MANUAL 400DH

8 / 41 MRU GmbH, D-74172 Neckarsulm

2.2. The company MRU

The 400DH is manufactured by the MRU GmbH in Neckarsulm, Germany

(founded in 1984), a medium sized company that specializes in developing,

producing and marketing high quality emission monitoring analyzers. MRU

GmbH manufactures a wide range of instruments, from standard analyzers

up to tailor made industrial analyzers

Plant 1: Sales, Service, R&D

Plant 2: Production

MRU GmbH

Fuchshalde 8 + 12

74172 Neckarsulm - Obereisesheim GERMANY

Phone +49 71 32 99 62 0 (Front office)

Phone +49 71 32 99 62 61 (Service)

Fax +49 71 32 99 62 20

Email: info@mru.de

Internet: www.mru.eu

USER MANUAL 400DH

MRU GmbH, D-74172 Neckarsulm 9 / 41

3Description

3.1. Connecting Detector Hand Probe 400DH with analyser.

►Connect the Detector Hand Probe 400DH to the analyser via the AUX

socket.

►The red markings of the AUX socket on the analyser and on the plug

the Detector Hand Probe 400DH must match.

NOTE

If necessary, find out about the position of the AUX socket in

the user manual of the corresponding analyser.

►Select in the Measurement menu the menu item 400DH (ext. Sonde).

►Press OK.

Connect sensor! appears.

NOTE

Note that the Detector Hand Probe 400DH alone does not

support a measurement. Each measuring function is deter-

mined by the inserted interchangeable sensor.

3.2. Inserting interchangeable Sensor

►Insert the desired interchangeable sensor into the sensor connector.

►Make sure that the interchangeable sensor clicks into place audibly.

The analyser automatically identifies the

USER MANUAL 400DH

10 / 41 MRU GmbH, D-74172 Neckarsulm

3.3. Terms and window designation

Function

Explanation

Connect probe!

In case of a communication error, check that the

probe is connected to the device via AUX con-

nector and that an interchangeable sensor is cor-

rectly plugged in.

The serial number of the mounted sensor is dis-

played.

Warm-up time

Depending on the sensor, a certain time is required

to warm up the sensor to the required operating

temperature.

Numeric value

Display of the elapsed warm-up time

Function bar

Displays the functions available for the sensor used

3.4. Context menu

Depending on the sensor type used, different functions are offered in the con-

text menu:

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere mru Analytisches Instrument Handbücher

mru

mru RM400 Bedienungsanleitung

mru

mru AMPRO 2000 Bedienungsanleitung

Beliebte Analytisches Instrument Handbücher anderer Marken

Cocraft

Cocraft NLT04 Bedienungsanleitung

M&C

M&C GENTWO PMA1000 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON optoncdt 1700 Bedienungsanleitung

CONDTROL

CONDTROL XP4 PRO Bedienungsanleitung

Extech Instruments

Extech Instruments BR200 Bedienungsanleitung

Dewetron

Dewetron DEWE-30-16 Produkthandbuch

EXTOL PREMIUM

EXTOL PREMIUM 8820043 Montage- und Bedienungsanleitung

RIDGID

RIDGID SeeSnake Compact Bedienungsanleitung

Teledyne

Teledyne 3000PA Bedienungsanleitung

YDLIDAR

YDLIDAR TIA Bedienungsanleitung

Olympus

Olympus IPLEX FX Series Bedienungsanleitung

Bosch

Bosch GLM 50 C Professional Bedienungsanleitung

Reflecta

Reflecta DigiEndoscope Bedienungsanleitung

Chinavision

Chinavision CVACZ-G696 Montageanleitung

Fuji Electric

Fuji Electric ZKMA Bedienungsanleitung

Teledyne

Teledyne 3300TA Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT IC-100HD Bedienungsanleitung

RIDGID

RIDGID micro CA-25 Bedienungsanleitung

mru HC40X Bedienungsanleitung

Beliebte Analytisches Instrument Handbücher anderer Marken