MSI MS-7015 Bedienungsanleitung

1-1

Getting Started

Chapter 1. Getting

Started

Thank you for purchasing MS-7015 v1.X Micro-ATX

mainboard. The MS-7015 v1.X is based on VIA®Apollo KT600 &

VT8237 chipsets, provides eight USB 2.0 ports for high-speed

data transmission and C-Media 9761 chip for 6-channel audio

output. Designed to fit the advanced AMD®Athlon™,Athlon™

XP or Duron™ processors, the MS-7015 v1.X delivers a high

performance and professional desktop platform solution.

Getting Started

1-2

MS-7015 M-ATX Mainboard

Mainboard Specifications

CPU

hSupports Socket A (Socket-462) for AMD®Athlon™/Athlon™ XP /Duron™

processors.

hSupports up to 3200+.

Chipset

hVIA®Apollo KT600 chipset

- FSB @200/266/333/400 MHz.

- Supports DDR200/266/333/400 DDR SDRAM.

-AGP 8X and PCI advanced high performance memory controller.

hVIA®VT8237 chipset

- Ultra DMA 66/100/133 master mode EIDE controller.

- ACPI & PC2001 compliant enhanced power management.

- Supports 8 USB 2.0 ports

MainMemory

hSupports four memory banks using two 184-pin 200/266/333/400 DDR

SDRAMs.

hDDR400 memory supports.

hSupports up to 2GB memory size.

Slots

hOne AGP (Accelerated Graphics Port) slot.

- Supports AGP 8X.

hThree 32-bit PCI bus slots (support 3.3v/5v PCI bus interface).

On-Board IDE

hAn IDE controller on the VT8237 chipset provides IDE HDD/CD-ROM with

PIO, Bus Master and Ultra DMA133/100/66 operation modes.

- Can connect up to four Ultra ATA drives.

On-Board Peripherals

hOn-Board Peripherals include:

- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and

2.88Mbytes

- 1 serial port (COM A)

- 1 parallel port supports SPP/EPP/ECP mode

1-3

Getting Started

- 1 audio port (SPDIF-in, SPDIF-out, Line-in, Line-out)

- 8 USB 2.0 ports (Rear * 4/ Front * 4)

- 1394 port

- RJ45 LAN port

Audio

h6 channels software audio codec C-Media 9761.

- Compliance with AC97 v2.2 Spec.

- Meet PC2001 audio performance requirement.

LAN 10/100MBps (Optional)

hVIA 6103

- Integrated Ethernet MAC and PHY transceiver, auto-negotiation

operation.

- Supports 10MB/s and 100MB/s.

- Compliance with PCI v2.2 and LAN on Motherboard (LOM) standard.

BIOS

hThe mainboard BIOS provides “Plug & Play” BIOS which detects the

peripheral devices and expansion cards of the board automatically.

hThe mainboard provides a Desktop Management Interface (DMI) function

which records your mainboard specifications.

hACPI, 1.0a, APM1.2, PnP 1.0a, SMBIOS 2.3, USB 2.0, WFM 2.0, Overclock,

Boot from USB device.

Dimension

hATX Form Factor: 24.5 cm (L) x 24.5 cm (W).

Mounting

h6 mounting holes.

1-4

MS-7015 M-ATX Mainboard

Mainboard Layout

MS-7015 v1.X Micro-ATX Mainboard

DDR1

DDR2

AGP Slot

SOCKET 462

Top : mouse

Bottom: keyboard

T: R J 4 5 L AN j a c k

B: USB ports

T: 1394 Port

B: USB ports

JL_IN1

JVEDIO1

Codec

VIA

VT6103

VIA

VT6306

BATT

BIOS

Winbond

83697HF

VIA

VT8237

VIA

KT600

IDE1

IDE2

FDD1

PCI Slot 1

PCI Slot 2

PCI Slot 3

JAUDIO1 J9 JUSB2 JUSB1

CPUFA1

SYSFA1

JPW1

ATX

PowerSupply

F_P1

SW2

SW1

JBAT1

JSLP1

SPDIF-In

-Out

Line-in

SPDIF-

Center/Subwoofer

Surrounding

Line-out

Top : L P T

Bottom:

COM A

2-1

Hardware Setup

Chapter 2. Hardware

Setup

This chapter tells you how to install the CPU, memory

modules, and expansion cards, as well as how to setup the

jumpers on the mainboard. Also, it provides the instructions on

connecting the peripheral devices, such as the mouse, keyboard,

etc.

While doing the installation, be careful in holding the

components and follow the installation procedures.

Hardware Setup

2-2

MS-7015 M-ATX Mainboard

Quick Components Guide

JL_IN1,p.2-18

DDR DIMMs, p.2-6

CPU, p.2-3

Back Panel I/O,

p.2-9

CPUFA1, p.2-14

FDD1, p.2-14

JUSB1 & JSUB2,

p.2-17

J9, p.2-16

JSLP1, p.2-17

AGP Slot, p.2-22

PCI Slots, p.2-22

IDE1 & IDE2,

p.2-15

SW1, SW2, p.2-21

SYSFA1, p.2-14

JVEDIO1, p.2-18

F_P1, p.2-19

JPW1, p.2-8

CONN1, p.2-8

JBAT1, p.2-20

J7, p.2-18

JAUDIO1, p.2-19

2-3

Hardware Setup

Central Processing Unit: CPU

CPU Core Speed Derivation Procedure

If CPU Clock = 100MHz

Core/Bus ratio = 14

then CPU core speed = Host Clock x Core/Bus ratio

= 100MHz x 14

= 1.4 GHz

The mainboard supports AMD®Athlon™, Athlon™ XP and Duron™

processors in the 462 pin package. The mainboard uses a CPU socket called

Socket-462 for easy CPU installation. When you are installing the CPU, make

sure the CPU has a heat sink and a cooling fan attached on the top to

prevent overheating. If you do not find the heat sink and cooling fan, contact

your dealer to purchase and install them before turning on the computer.

ThermalIssueforCPU

AMD Athlon™/Athlon™ XP/Duron™ processor with a speed

of 600MHz and above requires LARGER heatsink and fan.

You also need to add thermal grease between the CPU and

heatsink to improve heat dissipation. Then, make sure that the

CPU and heatsink are securely fastened and in good contact

with each other. These are needed to prevent damaging the processor and

ensuringreliableoperation.Youcan checkAMD’s websitefor moreinformation.

WARNING!

Memory Speed/CPU Clock Support Matrix

○:Yes.

X: Not available .

CPUClock

Memory DDR 266

133MHz

DDR 333 DDR 400

166MHz

200MHz

○

DDR200

X○

100MHz ○X

○

2-4

MS-7015 M-ATX Mainboard

1. Please turn off the power and

unplug the power cord before

installing the CPU.

2. Pull the lever sideways away

from the socket. Make sure

to raise the lever up to a 90-

degree angle.

3. Look for the gold arrow. The

gold arrow should point to-

wards the lever pivot. The

CPU can only fit in the correct

orientation.

4. If the CPU is correctly

installed, the pins should be

completely embedded into the

socket and can not be seen.

Please note that any violation

of the correct installation pro-

cedures may cause permanent

damages to your mainboard.

5. Press the CPU down firmly

into the socket and close the

lever. As the CPU is likely to

move while the lever is being

closed, always close the lever

with your fingers pressing

tightly on top of the CPU to

make sure the CPU is properly

and completely embedded

into the socket.

CPU Installation Procedures for Socket 462

Open Lever

Gold arrow

90 degree

Correct CPU placement

Incorrect CPU placement

Gold arrow

Sliding

Plate

Lever

Press down

the CPU

2-5

Hardware Setup

The following instructions will guide

you through the heat sink installation

procedures. Please consult your agent

for the proper CPU cooler set.

1. Position your CPU cooler set onto

the CPU.

2. Use one end of the clip to hook

the latch of the CPU sliding plate.

3. Hook the other latch to fix the

cooling fan set. You may need a

screw drive to press down the

other side of the clip.

4. Connect the fan to the power sup-

ply connector provided on your

mainboard.

Installing AMD Athlon CPU (Socket 462) Cooler Set

Apply some heat

sink paste

MSIRemindsYou...

Please apply some heat sink paste on top of CPU to dissipate

the heat more effectively.

2-6

MS-7015 M-ATX Mainboard

The mainboard provides 2 slots for 184-pin DDR SDRAM DIMM

(Double In-Line Memory Module) modules and supports the memory size up

to2GB.YoucaninstallPC3200/DDR400,PC2700/DDR333,PC2100/DDR266or

PC1600/DDR200 modules on the DDR DIMM slots (DDR 1~2).

Memory

DIMM1 & DIMM2

Introduction to DDR SDRAM

DDR (Double Data Rate) SDRAM is similar to conventional SDRAM,

but doubles the rate by transferring data twice per cycle. It uses 2.5 volts as

opposedto 3.3volts usedin SDRSDRAM, andrequires 184-pinDIMM modules

rather than 168-pin DIMM modules used by SDR SDRAM. High memory

bandwidth makes DDR an ideal solution for high performance PC, workstations

and servers.

Inhaltsverzeichnis

Andere MSI Hauptplatine Handbücher

MSI

MSI X79A-GD45 (8D) series Bedienungsanleitung

MSI

MSI MS-6163VA Bedienungsanleitung

MSI

MSI MS-6380LE Bedienungsanleitung

MSI

MSI MS-98H3 Bedienungsanleitung

MSI

MSI 990XA-GD55 series Bedienungsanleitung

MSI

MSI Z77A-GD55 series Bedienungsanleitung

MSI

MSI MS-7250 Bedienungsanleitung

MSI

MSI K7 Master MS-6341 Bedienungsanleitung

MSI

MSI MS-7365 Bedienungsanleitung

MSI

MSI Z270 gaming M3 Bedienerhandbuch

MSI

MSI B85M-E45 Bedienungsanleitung

MSI

MSI MAG B550 TORPEDO Bedienungsanleitung

MSI

MSI Q35MDO v2 Bedienungsanleitung

MSI

MSI P35 NEO2-FR - Motherboard - ATX Bedienungsanleitung

MSI

MSI MS-7521 (v2.X) Bedienungsanleitung

MSI

MSI MS-9896 Bedienungsanleitung

MSI

MSI 945GM2 - Fuzzy Motherboard - Mini ITX Bedienungsanleitung

MSI

MSI MS-5187 Bedienungsanleitung

MSI

MSI MEG X570 GODLIKE Bedienungsanleitung

MSI

MSI Z77A-G45 GAMING series Bedienungsanleitung

MSI

MSI NF980-G65 series Bedienungsanleitung

MSI

MSI X299 GAMING M7 ACK Bedienungsanleitung

MSI

MSI MAG B560M MORTAR WIFI Bedienungsanleitung

MSI

MSI K7T266 Pro-R Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung