MuxLab 500465 Bedienungsanleitung
© MuxLab Inc. 94-000746-B SE-000746-B
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: videoease@muxlab.com URL: www.muxlab.com
Specifications
Environment
HDMI 1.3a, 3G-SDI, HD-SDI & SD-SDI
Devices
DVD, plasma, projectors, monitors, TV, PC, laptops, servers
supporting HDMI.
Transmission
Transparent to the user
Bandwidth
225 MHz
Signals
HDMI 1.3a & SDI protocol
Supported Resolution
480i, 576i, 720p, 1080i, 1080p/23.98/24/25/29.9/30/50/59.94/60
Connectors
One (1) HDMI receptacle.
Two (2) BNC Female 75 Ohms.
Note: HDMI cables not included.
Maximum Distance
Based on a maximum
length of 6.6 ft (2 m)of
HDMI cable per end.
480i: RG-59: 650ft (198m) RG-6: 800ft (244m)
720p, 1080i: RG-59: 500ft (152m) RG-6: 650ft (198m)
1080p: RG-59: 250ft (76m) RG-6: 300ft (91m)
Cable
One (1) RG-59 or better cable required
Power Supply
Two (2) 110-240V/5VDC power supplies with interchangeable
blades
Power Consumption
Transmitter: 3.30 Watt Receiver: 3.55 Watt
Temperature
Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure
Metal
Dimensions
4.72” x 3.54” x 1.18” (12.0 x 9.0 x 3.0 cm)
Weight
1.3 lbs (0.59 kg)
Compliance
Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty
2 years
Order Information
500465 HDMI over Coax Extender Kit
500465-TX HDMI over Coax Transmitter
500465-RX HDMI over Coax Receiver
HDMI over Coax Extender Kit
500465
Quick Installation Guide
Overview
The HDMI over Coax Extender Kit (500465) allows HDMI equipment to be connected
up to 250ft (76m) @ 1080p via one (1) RG-59 coaxial cable in a point-to-point
configuration. The Transmitter converts the HDMI signal to SDI and the Receiver
converts the SDI signal back to HDMI, supporting resolutions of 480i (SD-SDI),
720p/1080i (HD-SDI) and 1080p (3G-SDI), and allows the user to benefit from an
existing coax cable infrastructure. The kit thereby enables conversion of the HDMI to
the SDI environment and vice-versa, and includes one (1) Transmitter and one (1)
Receiver.
Applications
Applications include commercial and residential AV systems, classroom projector
systems, digital signage, boardroom systems, collaborative PC systems, and medical
information systems.
Installation
1. Identify the connectors on the Transmitter and Receiver as indicated on the product
labels. Reference the front and rear product views for further details.
2. Verify that the distance between the Transmitter and Receiver is within
MuxLab specifications (see Specifications table).
3. To install the Transmitter:
3a. Connect the Transmitter to the HDMI video source with an HDMI compliant
cable.
3b. Connect one (1) length of RG-59 (or higher) grade coaxial cable to the
RJ45 LINK connector on the Transmitter.
© MuxLab Inc. 2013
4. To install the Receiver:
4a. Connect the Receiver to the HDMI display equipment with an HDMI compliant
cable.
4b. Connect the one (1) RG-59 coaxial cable to the RJ45 LINK connector on the
Receiver.
5. Connect the 5 VDC power supply to the Receiver first, and then plug the power
supply into an AC power outlet. Connect the 5 VDC power supply to the
Transmitter first, and then plug the power supply into an AC power outlet. If power
is present, the green power LED of the Transmitter and the Receiver will be ON.
Note: Power the HDMI over Coax Extender only after all connections are made.
6. Power the HDMI equipment and verify the image quality.
7. This product can be daisy chained by connecting additional Receivers to the second
SDI port. This is achieved by connecting the BNC output of the first HDMI
Transmitter or Receiver to the BNC input of the cascade Receiver.
8. The following diagram shows the final configuration.
Troubleshooting
The following table describes some of the symptoms, probable causes and possible solutions
in regards to the installation of the HDMI over Coax Extender Kit:
Symptom
Tx LEDs
Rx LEDs
Probable
Cause
Possible
Solutions
Power
HDMI
Coax
Power
HDMI
Coax
No Image
OFF
OFF
OFF
OFF
OFF
OFF
No power
•Check power
connections
No Image
ON
OFF
OFF
ON
OFF
OFF
Source
•Check the HDMI
cable at the source.
No Image
ON
ON
OFF
ON
OFF
OFF
Resolution
•Check if the source
resolution is valid.
No Image
ON
ON
ON
ON
OFF
OFF
Coaxial Cable
•Check the coaxial
cable.
No Image
ON
ON
ON
ON
OFF
ON
Display
•Check the HDMI
cable at the display.
Flickering
Image
ON
ON
ON
ON
ON
ON
Synchronization
•Check cable length
•Check the HDMI
Cable Quality.
Choppy sound
ON
ON
ON
ON
ON
ON
Synchronization
•Check cable length
•Check the HDMI
Cable Quality.
If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at
877-689-5228 (toll-free in North America) or (+1) 514-905-0588 (International).
Inhaltsverzeichnis
Andere MuxLab Extender Handbücher
MuxLab
MuxLab Pro Digital 500452 Bedienungsanleitung
MuxLab
MuxLab 500401-WP-US Bedienungsanleitung
MuxLab
MuxLab 500770 Bedienungsanleitung
MuxLab
MuxLab Broadcast 500734 Bedienungsanleitung
MuxLab
MuxLab 500112 Bedienungsanleitung
MuxLab
MuxLab 500771 Bedienungsanleitung
MuxLab
MuxLab 500759 Bedienungsanleitung
MuxLab
MuxLab 500041-WP-US Bedienungsanleitung
MuxLab
MuxLab 500454-POE Bedienungsanleitung
MuxLab
MuxLab 500772 Bedienungsanleitung
MuxLab
MuxLab 500454 Bedienungsanleitung
MuxLab
MuxLab 500757 Bedienungsanleitung
MuxLab
MuxLab 500070 Bedienungsanleitung
MuxLab
MuxLab 500502 Bedienungsanleitung
MuxLab
MuxLab 500752 Bedienungsanleitung
MuxLab
MuxLab 500759-TX-Dante Bedienungsanleitung
MuxLab
MuxLab 500115 Bedienungsanleitung
MuxLab
MuxLab 500459 Bedienungsanleitung
MuxLab
MuxLab 500752 Bedienungsanleitung
MuxLab
MuxLab 500800 Bedienungsanleitung
Beliebte Extender Handbücher anderer Marken
foxunhd
foxunhd SX-AEX01 Bedienungsanleitung
TERK Technologies
TERK Technologies LFIRX2 Bedienungsanleitung
Devolo
Devolo Audio Extender Handbuch
Edimax
Edimax EW-7438RPn V2 Bedienungsanleitung
Shinybow USA
Shinybow USA SB-6335T5 Bedienungsanleitung
SECO-LARM
SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung