MuxLab 500462 Bedienungsanleitung

8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5

Tel: (514) 905-0588 Fax: (514) 905-0589

Toll Free (North America): (877) 689-5228

E-mail: videoease@muxlab.com URL: www.muxlab.com

Specifications

Environment

HDMI 1.3a and DVI-D

Devices

DVD, plasma, projectors, monitors, TV, PC, laptops, servers

supporting HDMI.

Transmission

Unidirectional. Transparent to the user

Bandwidth

340 MHz

Signals

HDMI 1.3a protocol

Copy Protection

Do NOT Support HDCP protected content.

Connectors

TX Side: One (1) HDMI receptacle.

One (1) LC Fiber connector (output only).

One (1) 2.1mm power connector.

TX Side: One (1) HDMI receptacle.

One(1) LC Fiberconnector (input only).

One (1) 2.1mm power connector.

Note: HDMI and Fiber cables not included.

Maximum Distance

Based on a maximum

length of 6.6 ft (2 m) of

HDMI cable per end.

480i/p: 984ft (300m)

720p, 1080i: 984ft (300m)

1080p 8-bit: 984ft (300m)

1080p 12-bit deep-color: 984ft (300m)

4K @ 24,25, 30Hz 984ft (300m)

Cable

One (1) Multimode fiber 50/125 μm OM3 cable required

Power Supply

Two (2) 110-240V/5VDC power supply with interchangeable blades

Power Consumption

Transmitter: 1.35 Watt Receiver: 1.15 Watt

Temperature

Operating: 0° to 55°C Storage: -20° to 85°C

Humidity: Up to 95% non-condensing

Enclosure

Aluminium

Dimensions

3.27” x 1.97” x 0.75” (83 x 50 x 19 mm)

Weight

1.0 lb (0.45 kg)

Compliance

Regulatory: FCC Class A, CE, RoHS

Warranty

2 years

Order Information

500462 HDMI Optical Isolator Kit

HDMI Optical Isolator Kit

500462

Quick Installation Guide

Overview

The HDMI Optical Isolator (500462) allows HDMI equipment to be completely isolated

and connected up to 984ft (300m), while allowing a unidirectional communication (with

no return signaling) via one (1) LC 50/125 μm OM3 multimode fiber cable in a point-to-

point configuration at 1080p resolution.

The HDMI Optical Isolator establishes a high separation between the source computer

and the display devices preventing any potential leakage between the source and the

peripheral equipment; removing the vulnerability of shared display equipment to cyber-

attacks.

The kit comes with one (1) Transmitter, one (1) Receiver and two (2) power supply.

Applications

Commercial and residential AV systems, classroom projector systems, digital signage,

boardroom systems, collaborative PC systems, and medical information systems, high

security applications.

Key Features

•Complete optical isolation between source and display.

•Unidirectional HDMI communication.

•No return signaling.

•Fixed EDID configuration.

•Up to 984ft (300m) @ 1080p via one (1) LC multimode fiber.

All manuals and user guides at all-guides.com

all-guides.com

Installation

1. Identify the connectors on the Transmitter and Receiver as indicated on the product

labels.

2. Verify that the distance between the HDMI Optical Isolator Transmitter and

Receiver is within MuxLab specifications (see Specifications table).

3. To install the Transmitter:

3a. Connect the Transmitter to the HDMI video source with an HDMI compliant

cable.

3b. Connect one (1) length of multi-mode fiber cable to the LC Fiber connector on the

Transmitter.

4. To install the Receiver:

4a. Connect the Receiver to the HDMI display equipment with an HDMI compliant

cable.

4b. Connect the one (1) length of multi-mode fiber cable to the LC Fiber connector on

the Receiver.

5. Connect the 5 VDC power supply to the Receiver first, and then plug the power

supply into an AC power outlet. Connect the 5 VDC power supply to the

Transmitter first, and then plug the power supply into an AC power outlet.

Note: Power the HDMI Optical Isolator only after all connections are made.

6. Power on the HDMI equipment and verify the image quality.

7. The following diagram shows the final configuration.

Troubleshooting

The following table describes some of the symptoms, probable causes and possible solutions

in respect to the installation of the HDMI Optical Isolator Kit:

Symptom Probable

Cause Possible

Solutions

No Image

No power

• Check power connections

No Image

Fiber Cable

• Check the Fiber cables.

No Image

HDMI Cable

• Check the HDMI Cable.

No Image

Synchronization

• Check cable length.

Flickering Image

Synchronization

• Check cable length

• Check the HDMI Cable Quality.

Choppy sound

Synchronization

• Check cable length

• Check the HDMI Cable Quality.

Green or pink hue

DDC communication

• Cycle power of the HDMI Optical Isolator.

Image flickers

when powering up

nearby equipment

Interference

• Move HDMI Optical Isolator away from the

source of the interference.

If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at

877-689-5228 (toll-free in North America) or (+1) 514-905-0588 (International).

All manuals and user guides at all-guides.com

Andere MuxLab Extender Handbücher

MuxLab

MuxLab 500405 Bedienungsanleitung

MuxLab

MuxLab 500454 Bedienungsanleitung

MuxLab

MuxLab 500402 Bedienungsanleitung

MuxLab

MuxLab 500730 Bedienungsanleitung

MuxLab

MuxLab 500458-ARC Bedienungsanleitung

MuxLab

MuxLab 500457 Bedienungsanleitung

MuxLab

MuxLab 500460-RX Bedienungsanleitung

MuxLab

MuxLab 500752 Bedienungsanleitung

MuxLab

MuxLab 500752 Bedienungsanleitung

MuxLab

MuxLab 500417 Bedienungsanleitung

MuxLab

MuxLab 500459 Bedienungsanleitung

MuxLab

MuxLab 500462 Bedienungsanleitung

MuxLab

MuxLab 500112 Bedienungsanleitung

MuxLab

MuxLab 500464-V2 Bedienungsanleitung

MuxLab

MuxLab 500115 Bedienungsanleitung

MuxLab

MuxLab 500114 Bedienungsanleitung

MuxLab

MuxLab 500754 Bedienungsanleitung

MuxLab

MuxLab 500768 Bedienungsanleitung

MuxLab

MuxLab DomoStream Bedienungsanleitung

MuxLab

MuxLab 500072 Bedienungsanleitung

MuxLab

MuxLab 500465 Bedienungsanleitung

MuxLab

MuxLab 500754 Bedienungsanleitung

MuxLab

MuxLab 500390 Bedienungsanleitung

MuxLab

MuxLab 100504 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung